DEWALT Chisel Safety Glasses — ANSI Z87.1 Trim-Fit Half-Frame
$11.50
Final price set by Amazon · may vary
Lens: Clear
EDITORIAL REVIEW: 4.3/5 — WC Safety Review of the DEWALT Chisel, the trim-fit half-frame that layers under a face shield. Editorial assessment by Steven Eaton, WC Safety editor, based on published DEWALT specificati...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.3/5 — WC Safety Review of the DEWALT Chisel, the trim-fit half-frame that layers under a face shield.
Editorial assessment by Steven Eaton, WC Safety editor, based on published DEWALT specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published DEWALT specifications and category fit. We did not laboratory-test this product.
The DEWALT Chisel (DPG110) is a trim-fit half-frame safety glass rated ANSI Z87.1 with 99.9% UV protection. Its half-frame construction removes the lower lens rim for a lighter feel and a wider downward field of view — useful when you're constantly referencing hand work below the frame line — and the compact, low-profile shape pairs neatly under a face shield. Anti-slip rubber temples and unisex sizing round it out, in Clear and Smoke.
CHECK PRICE ON AMAZON → SHOP DEWALT SAFETY GLASSES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the DEWALT Chisel suits detail and under-shield work
Two things set the Chisel apart from a standard frame: the half-frame drops the lower lens rim so nothing blocks your downward view of hand work, and the low-profile shape tucks under a face shield without a fight. For detail work, bench work, and any task where you're also wearing a shield, that combination is the point — a clean sightline down and a comfortable base layer. Our full DEWALT Chisel review rates it 4.3/5, and the safety glasses buyer's guide covers frame-style tradeoffs.
Safety first: the Chisel is impact-and-debris protection, not a sealed goggle — it is not rated against a chemical splash hazard, fine airborne dust, or vapor, which require sealed goggles or a face shield per your hazard assessment. The half-frame removes the lower rim, not lens coverage, so protection holds; but for tasks that generate splash or heavy debris, add the face shield it's designed to layer under. Choose eyewear against measured hazards with the when-do-you-need-safety-glasses guide.
What the listing documents
From the published specs: ANSI Z87.1 certification with 99.9% UV protection; a trim-fit half-frame polycarbonate design that removes the lower lens rim for a wider downward field of view; anti-slip rubber temples and unisex sizing; two tints — Clear and Smoke; base model DPG110-1D. As dewalt safety glasses go, the Chisel is the streamlined member — a genuine half frame safety glasses build and a true low profile safety glasses pick that layers under a shield.
Choosing your Chisel variant
Two focused tints: Clear from the clear-lens collection for indoor and low-light work, and Smoke for bright outdoor daylight — the clear-vs-smoke lens guide settles the call. The Chisel has no anti-fog variant, so humid work is better served by the anti-fog guide and anti-fog collection, and shifting light by an indoor/outdoor lens.
Where the Chisel sits in the DEWALT line
The DEWALT line splits by frame style: this Chisel is the trim half-frame that layers under a shield, the Crosscut is the translucent half-frame with open peripheral vision, the Radius is the compact full-lens entry frame, and the Contractor Pro carries the widest tints. Browse the full DEWALT safety glasses collection, and the best safety glasses 2026 roundup places the line against other brands.
Where it fits by job and crew orders
The under-shield fit and downward sightline suit bench, detail, and grinding work — the construction, manufacturing, and mechanics guides rank frames by task, and smaller-faced wearers should check the small-face guide and women's fit guide. Where the hazard exceeds impact — splash, dust, vapor — step to a sealed goggle from the safety goggles collection or the broader eye protection collection. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Reading the Z87 marking, and what it does not cover
Protective eyewear in the US is built to ANSI/ISEA Z87.1, and OSHA 1910.133 requires eye protection that meets it. The marking on the frame is the specification, and the important distinction is a single character: Z87 is basic impact, Z87+ is high impact — tested with a quarter-inch steel ball at 150 ft/s for spectacles. If the work throws anything, Z87+ is the line.
The suffixes narrow it further: D3 is splash and droplet, D4 dust, D5 fine dust. These matter because a spectacle cannot earn D3 — droplet protection needs a sealed goggle. Safety glasses are impact protection, not chemical splash protection, however wraparound the lens looks, and substituting one for the other is a common and consequential error.
A face shield is also secondary protection under 1910.133: it is worn over primary eye protection, never instead of it. And tint is not shade — a dark lens without a stated IR/UV shade number offers no rated protection against radiant energy.
Frequently asked questions
What is the DEWALT Chisel?
A trim-fit half-frame safety glass rated ANSI Z87.1 with 99.9% UV protection. Its half-frame removes the lower lens rim for a lighter feel and a wider downward field of view, and the low-profile shape pairs well under a face shield. It comes in Clear and Smoke.
What does the half-frame design do?
Removing the lower lens rim lightens the frame and opens up the downward field of view, so you see your hands and work below the frame line without a rim in the way - handy for detail and reference work. It also gives a streamlined, low-profile look.
Does the Chisel fit under a face shield?
Yes - its compact, low-profile profile is designed to sit neatly under a face shield, so you can layer both without the glasses fighting the shield. That makes it a practical base layer for grinding or spray work that needs a shield too.
Is it ANSI Z87.1 rated?
Yes - it carries ANSI Z87.1 certification with 99.9% UV protection, meeting OSHA's requirement for occupational eye protection. Match it to your task's specific impact level and add a face shield where the job calls for one.
What tints does the Chisel come in?
Clear for indoor and low-light work and Smoke for bright outdoor daylight - two focused options. Match the tint to your light; both carry the same rating and UV protection.
Is the sizing unisex?
Yes - the Chisel uses unisex sizing intended to accommodate a wide range of face shapes, and the anti-slip rubber temples help it stay put on different heads during active work.
How is the Chisel different from the Crosscut?
Both are half-frame DEWALT glasses; the Chisel emphasizes a trim, low-profile look that layers under a face shield, while the Crosscut uses a translucent half-frame with a wide wrap for open peripheral vision. Pick by whether you prioritize under-shield fit or peripheral coverage.
Is it over-the-glasses (OTG)?
No - the Chisel is not an OTG frame. Prescription-glasses wearers should look at an over-the-glasses model or the DEWALT Reinforcer RX bifocal.
Is it enough, or do I need goggles?
The Chisel protects against impact and debris from the front and sides. It does not seal against a chemical splash hazard, fine dust, or vapor - those need sealed goggles or a face shield. Match the eyewear to your hazard assessment.
Does the half-frame reduce protection?
No - the lens still meets ANSI Z87.1; the half-frame removes the lower plastic rim, not lens coverage. The lens continues to shield the eye while the open bottom improves downward sightlines.
How do I care for the lenses?
Rinse grit before wiping and use a microfiber or lens-safe cloth; harsh cleaners haze polycarbonate. Retire a lens once scratches enter your line of sight - a scratched safety lens no longer protects fully.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Brand / Vendor
DEWALT
Model / SKU
DPG110-1D
Product Type
Safety Glasses
Price
$11.50 (Amazon)
Rating
4.6 / 5 — 569 Amazon ratings
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
★★★★★4.6 / 5· 569 ratings on Amazon
★★★★★
Great glasses!
Great glasses. Bonus they are safety ones. Will be good for when I do brush cutting and yard work. Wish the nose pieces were softer. That’s ok. I really like how the lenses are wide and don’t see frames much at all. Super happy!
Verified Purchaser · May 7, 202 · ✓ Amazon Verified Purchase
★★★★★
Great value
I tried a number of different safety glasses to replace the cheap old generic pair everyone has in their garage. Despite being the lowest price of the ones I tried, they were one of my favorites. They fit me quite well, are comfortable, and have a simple clean look. Quality seems solid and most importantly they provide good protection.
Verified Purchaser · January 27 · ✓ Amazon Verified Purchase
★★★★★
Good product. Liked it very much.
It worked great for me, and I like it.
Verified Purchaser · January 19 · ✓ Amazon Verified Purchase
★★★★☆
Worth getting
Comfortable and better than what they give us at work.
Verified Purchaser · June 12, 2 · ✓ Amazon Verified Purchase
★★★★★
good staff
good glasses for work, protect well, durable, comfortable, definitely a must have
Verified Purchaser · May 3, 202 · ✓ Amazon Verified Purchase
★★★★★
Good value and Good functionality
Comfortable to wear, fits my head without squeezing or being too loose, keeps my eyes protected, I'm a fan.
Verified Purchaser · June 18, 2 · ✓ Amazon Verified Purchase
★★★★★
Excellent brnad and safety protetciion
Very comfortable work safety glasses. The nose piece is soft, and the ear arms are comfortable after a day's use. The darker color is great for outside use, but not so dark that you cannot see in low light conditions.
Verified Purchaser · July 29, 2 · ✓ Amazon Verified Purchase
★★★★★
would buy these again
great price, nice quality, great fit
Verified Purchaser · September · ✓ Amazon Verified Purchase
★★★☆☆
Not great....
Rubber Nose Bridge...not very well secured. Better to go with solid nose bridge than this rubber bridge nose
Verified Purchaser · April 20, · ✓ Amazon Verified Purchase
Showing 9 of 569 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the DEWALT Chisel?
A trim-fit half-frame safety glass rated ANSI Z87.1 with 99.9% UV protection. Its half-frame removes the lower lens rim for a lighter feel and a wider downward field of view, and the low-profile shape pairs well under a face shield. It comes in Clear and Smoke.
What does the half-frame design do?
Removing the lower lens rim lightens the frame and opens up the downward field of view, so you see your hands and work below the frame line without a rim in the way - handy for detail and reference work. It also gives a streamlined, low-profile look.
Does the Chisel fit under a face shield?
Yes - its compact, low-profile profile is designed to sit neatly under a face shield, so you can layer both without the glasses fighting the shield. That makes it a practical base layer for grinding or spray work that needs a shield too.
Is it ANSI Z87.1 rated?
Yes - it carries ANSI Z87.1 certification with 99.9% UV protection, meeting OSHA's requirement for occupational eye protection. Match it to your task's specific impact level and add a face shield where the job calls for one.
What tints does the Chisel come in?
Clear for indoor and low-light work and Smoke for bright outdoor daylight - two focused options. Match the tint to your light; both carry the same rating and UV protection.
Is the sizing unisex?
Yes - the Chisel uses unisex sizing intended to accommodate a wide range of face shapes, and the anti-slip rubber temples help it stay put on different heads during active work.
How is the Chisel different from the Crosscut?
Both are half-frame DEWALT glasses; the Chisel emphasizes a trim, low-profile look that layers under a face shield, while the Crosscut uses a translucent half-frame with a wide wrap for open peripheral vision. Pick by whether you prioritize under-shield fit or peripheral coverage.
Is it over-the-glasses (OTG)?
No - the Chisel is not an OTG frame. Prescription-glasses wearers should look at an over-the-glasses model or the DEWALT Reinforcer RX bifocal.
Is it enough, or do I need goggles?
The Chisel protects against impact and debris from the front and sides. It does not seal against a chemical splash hazard, fine dust, or vapor - those need sealed goggles or a face shield. Match the eyewear to your hazard assessment.
Does the half-frame reduce protection?
No - the lens still meets ANSI Z87.1; the half-frame removes the lower plastic rim, not lens coverage. The lens continues to shield the eye while the open bottom improves downward sightlines.
How do I care for the lenses?
Rinse grit before wiping and use a microfiber or lens-safe cloth; harsh cleaners haze polycarbonate. Retire a lens once scratches enter your line of sight - a scratched safety lens no longer protects fully.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.