Dewalt Dpg110 Chisel Safety Glasses Review

Are the DEWALT DPG110 Chisel Safety Glasses Right for General Industry and Construction?

Published June 11, 2026 · Last updated July 27, 2026

Short answer: Yes — the DEWALT DPG110 Chisel Safety Glasses are a dependable, no-nonsense choice for workers who need ANSI Z87.1-rated eye protection in a lightweight half-frame that pairs cleanly with face shields and other secondary PPE. They perform best in general manufacturing, construction, and light industrial settings where a trim, low-profile fit matters more than anti-fog performance in extreme humidity. If anti-fog is your top priority, consider the DEWALT DPG82 Concealer Safety Goggles or browse our full Safety Glasses Collection for sealed-vent alternatives.

DEWALT DPG110 Chisel Safety Glasses Review (2026)

Filed under: Safety Glasses · Eye Protection · DEWALT DPG110 Chisel Safety Glasses

DEWALT's DPG (DeWalt Professional Grade) protective eyewear line has long been a fixture on commercial construction sites and in general industry facilities where job-site credibility matters as much as compliance. The DPG110 Chisel sits at the accessible end of that lineup — priced between the listed price (clear) and the listed price (smoke) — and targets workers who want proven ANSI/ISEA Z87.1 high-impact certification without paying a premium for features they don't need on a daily basis.

At WC Safety, we cover both the clear DPG110-1D and the smoke DPG110-2D because they fill a specific gap in the PPE locker: a half-frame safety glass slim enough to slip under a face shield or welding hood brim, light enough to wear an eight-hour shift without nose-bridge fatigue, and affordable enough to replace on a regular cycle without budget heartburn. The half-frame design also opens up a wider downward field of view — a genuine ergonomic advantage for workers reading gauges, placing fasteners, or handling hand tools at waist level.

This review is based on ANSI/ISEA Z87.1-2020 standard requirements, DEWALT's published product documentation, OSHA 29 CFR 1910.133 general industry standards, and specification-based evaluation of the frames and optics. No specs have been invented or extrapolated beyond what the product and its governing standard actually state.

Who Should Buy the DEWALT DPG110 Chisel Safety Glasses?

The DPG110 is best matched to a specific buyer profile. If you see yourself in these descriptions, this frame warrants serious consideration. Browse the full Safety Glasses Collection if your needs are more specialized.

• General construction workers who rotate through multiple pairs per week and need OSHA 29 CFR 1926.102 compliance without paying premium-tier prices.
• Manufacturing floor personnel working in climate-controlled facilities where fogging is not a persistent issue.
• Face-shield users who need a low-profile secondary eye barrier that doesn't create a pressure point under the shield brim.
• Supervisors and site visitors who need compliant PPE for periodic site access without daily wear demands.
• Tool-belt wearers and tradespeople who appreciate the wider downward field of view the half-frame affords when looking at belt pouches, measuring tapes, or fastener placements.

If you work in foundries, welding operations, chemical splash environments, or consistently hot/humid spaces, step up to a sealed-frame option from our Eye Protection Collection.

What the DEWALT DPG110 Chisel Does Well

ANSI/ISEA Z87.1 Dual-Mode Impact Certification

The most important performance fact about any safety glass is its impact rating, and the DPG110 clears the highest standard tier in ANSI/ISEA Z87.1-2020: both high-velocity (V) and high-mass (D) impact resistance. High-velocity certification means the lens survived a 1/4-inch steel ball fired at 150 fps. High-mass means it withstood a pointed 500-gram weight dropped from 50 inches. Most everyday tasks — flying debris from power tools, dropped hardware, airborne particulate — are well within what this lens is certified to handle. For a full breakdown of how Z87.1 ratings work, read our ANSI Z87.1 Safety Glasses Standard Explained guide.

99.9% UV Protection on Both Lenses

Both the clear DPG110-1D and smoke DPG110-2D block 99.9% of UV radiation. This matters even indoors — mercury vapor lights, UV curing lamps, and certain welding arcs emit UV at levels that can cause photokeratitis with unprotected exposure. The smoke lens additionally reduces visible light transmission for comfortable bright-outdoor use. Neither lens is polarized, so glare off reflective horizontal surfaces (water, metal panels, wet concrete) is not filtered — keep that limitation in mind for outdoor road construction or waterfront work.

Half-Frame Design for Enhanced Downward Field of View

The Chisel's defining ergonomic feature is its rimless-bottom half-frame. By eliminating the lower frame rail, DEWALT opens up the wearer's downward field of view — a real productivity and safety advantage for workers who routinely look down at controls, fastener placements, or floor-level hazards. The unobstructed lower lens edge also means no frame reflection when looking at screens or instrument panels in low-light conditions. This same geometry is what makes the DPG110 a natural fit under face shields, where a full-frame safety glass often creates an uncomfortable pressure ridge against the shield's brow bar.

Rubberized Anti-Slip Temple Coating

The temples are coated with a rubberized grip material that maintains frame position during sweating, head movement, and physical exertion. This is a feature often found only on frames priced the listed price higher, and it meaningfully reduces the "constant readjustment" fatigue that plagues cheaper polycarbonate safety glasses with smooth plastic arms. The grip doesn't add noticeably to the frame's profile, so it doesn't interfere with hard-hat straps or hearing protection headbands.

Scratch-Resistant Lens Coating

DEWALT applies a scratch-resistant (AS) coating to the polycarbonate lenses, extending usable lens life on dusty job sites. Scratched lenses reduce optical clarity, create distracting glare artifacts, and — importantly — compromise the lens's structural integrity over time. A coated lens on a frame can realistically last 3–4 months in moderately demanding conditions before optical degradation justifies replacement, making the per-wear cost genuinely competitive against more expensive frames.

Where the DEWALT DPG110 Chisel Falls Short

No Anti-Fog Coating

This is the DPG110's most significant limitation for many buyers. The lenses carry no anti-fog (AF) designation under ANSI Z87.1. In humid environments — outdoor summer work, boiler rooms, food processing facilities, greenhouses — these lenses will fog promptly and require removal to clear. Fogged lenses are a serious safety hazard: workers who pull glasses down to see are fully unprotected. If your work environment generates persistent lens fogging, our Best Anti-Fog Safety Glasses guide will walk you through chemically-coated and ventilated alternatives.

Limited Lens Tint Selection

The DPG110 line offers only two options: clear (DPG110-1D) and smoke (DPG110-2D). Workers who need amber for low-contrast detection, indoor/outdoor transitional use, or mirrored lenses for intense sunlight will need to look elsewhere. DEWALT's own broader lineup — and the safety glasses we cover from other brands — cover these gaps, but not within the DPG110 SKU family specifically.

Not Suitable for Overhead Debris Hazards

The half-frame design that makes the DPG110 comfortable and versatile also leaves the top of the orbital area without a rigid frame rail. For overhead grinding, cutting, or chipping tasks where debris can fall from above the plane of the lens, a full-frame or wraparound style provides more reliable top-of-eye coverage. OSHA 29 CFR 1910.133 requires eye protection adequate for the specific hazard — workers doing overhead tasks should consult our Safety Glasses vs Safety Goggles comparison before selecting only the DPG110.

No OTG Accommodation for Prescription Wearers

The DPG110 is not designed to fit over prescription eyeglasses. Prescription wearers must choose between dedicated OTG (over-the-glasses) safety frames or prescription safety glasses. Forcing a non-OTG frame over corrective lenses risks poor fit, pressure points, and reduced impact resistance due to lens misalignment. We have a dedicated OTG section in our Safety Glasses Collection for workers who need this accommodation.

DEWALT DPG110 vs. Comparable Safety Glasses

DEWALT DPG110 vs. Other DEWALT Safety Glasses

Decision rule:

• Choose DPG110 Chisel if: climate-controlled or dry environment, face-shield pairing is needed, budget is a priority.
• Choose DPG82 Concealer if: persistent fogging is an issue, dusty/sealed environments, chemical splash risk.
• Choose DPG58 Framework if: wraparound side coverage is needed but a goggle is too restrictive.

Compatible Accessories for the DEWALT DPG110

Extending the service life and comfort of your DPG110 comes down to a few high-value add-ons. All are available through WC Safety or Amazon.

• Face Shields: The DPG110's half-frame design is specifically well-suited for pairing with a face shield for tasks involving larger debris or splash risk. Browse our Eye Protection Collection for compatible face shield options. Face Shields on Amazon →
• Lens Cleaning Wipes: Pre-moistened lens wipes remove debris without scratching the polycarbonate surface — far safer than shirt sleeves or shop rags. Lens Wipes on Amazon →
• Anti-Fog Spray: Aftermarket anti-fog spray can extend the DPG110's usability into marginally humid conditions — not a substitute for an AF-coated lens in persistently wet environments. Anti-Fog Spray on Amazon →
• Hard Cases and Microfiber Pouches: Storing the DPG110 loose in a tool bag is the fastest way to scratch the lenses. A hard case or microfiber pouch dramatically extends usable lens life. Hard Cases on Amazon →

Understanding ANSI Z87.1 and What It Means for Your Purchase

ANSI/ISEA Z87.1-2020 is the governing standard for occupational eye and face protection in the United States, and it underpins OSHA's eye protection requirements under 29 CFR 1910.133 (general industry) and 29 CFR 1926.102 (construction). At its core, the standard establishes two impact tiers: basic impact (marked Z87) and high impact (marked Z87+). The DPG110 carries the Z87+ high-impact designation, meaning it passed the more demanding velocity and mass drop tests described above. For most industrial and construction applications, Z87+ is the appropriate minimum.

Beyond impact, the standard addresses coatings. Anti-fog coatings are tested by the standard's fog chamber method and, if a lens passes, it earns an "AF" designation on the lens or frame. Anti-scratch coatings earn an "AS" designation. The DPG110 carries the scratch-resistant (AS) coating but not the anti-fog (AF) designation — an important distinction in humid or temperature-differential environments. For more detail on how to read Z87.1 lens markings and understand what the letters mean for your specific hazard, read our comprehensive ANSI Z87.1 Safety Glasses Standard Explained guide.

On the lens design side, the DPG110's polycarbonate half-frame is a common and proven format for light industrial use. Polycarbonate is inherently UV-absorbing, which is why both DPG110 variants can claim 99.9% UV protection without a separate UV coating. The half-frame format reduces total lens area compared to a full-wrap, which means slightly reduced lateral field coverage — though for most non-overhead-debris tasks, the trade-off is favorable given the improved downward field of view and compatibility with secondary PPE. Learn more about selecting the right lens format in our Best Safety Glasses for Work guide.

Total Cost of Ownership

At the listed price (clear DPG110-1D) and the listed price (smoke DPG110-2D), the DPG110 sits at the affordable end of ANSI Z87.1 high-impact certified eyewear. For a facility purchasing multiple pairs for a crew, that price point enables a sensible replacement cadence — critical because scratched or damaged safety glasses are both an optical hazard and a compromised impact barrier.

For daily industrial use in moderately demanding conditions (airborne particulate, occasional debris, typical handling), a realistic service life with the scratch-resistant coating is approximately 3–4 months before lens degradation becomes noticeable. At that replacement rate, the per-day cost works out to roughly the listed price per day for the clear lens — less than a cup of coffee, and a fraction of any workers' comp claim arising from a preventable eye injury. Organizations purchasing in multi-pair packs may reduce per-unit cost further; check current bulk pricing on our product page or via Amazon.

Common questions

Are the DEWALT DPG110 Chisel Safety Glasses ANSI Z87.1 certified?

Yes. The DPG110 carries ANSI/ISEA Z87.1 certification for both high-velocity and high-mass impact resistance — the highest impact tier in the standard, marked Z87+. Both the clear (DPG110-1D) and smoke (DPG110-2D) variants share this certification. For a full explanation of what Z87.1 impact ratings mean, see our ANSI Z87.1 Safety Glasses Standard Explained guide.

Do the DEWALT DPG110 safety glasses meet OSHA requirements?

Yes. For general industry tasks governed by OSHA 29 CFR 1910.133 and construction tasks under 29 CFR 1926.102, the DPG110's Z87.1 high-impact certification satisfies the standard's eye protection performance requirements, provided the glasses are selected for the specific hazard type present. OSHA requires that PPE be appropriate to the hazard — verify your hazard assessment before relying solely on any single safety glass.

Do the DEWALT DPG110 glasses have anti-fog coating?

No. The DPG110 does not carry an anti-fog (AF) designation under ANSI/ISEA Z87.1-2020. In humid, hot, or high-respiration environments, the lenses will fog. Workers in those conditions should consider an AF-coated alternative — our Best Anti-Fog Safety Glasses guide covers the top options.

What is the UV protection level on the DEWALT DPG110?

Both the clear and smoke lenses block 99.9% of ultraviolet radiation. Polycarbonate lens material is inherently UV-absorbing, so this protection is built into the lens substrate rather than applied as a surface coating — meaning it does not degrade with cleaning or scratching the way a UV surface treatment might.

Can I wear the DEWALT DPG110 over my prescription glasses?

No. The DPG110 is not an OTG (over-the-glasses) frame. Wearing it over prescription eyeglasses will result in a poor fit, potential pressure points, and may compromise the frame's certified impact performance due to lens misalignment. Prescription eyeglass wearers should select a dedicated OTG frame from our Safety Glasses Collection.

What lens options are available for the DEWALT DPG110?

Two variants are stocked: clear (DPG110-1D, the listed price) for indoor and low-light use, and smoke (DPG110-2D, the listed price) for bright outdoor conditions. No amber, mirror, indoor/outdoor, or polarized tints are available in the DPG110 line. For expanded tint options, see our broader Safety Glasses Collection.

Are the DEWALT DPG110 glasses suitable for outdoor construction work?

Yes for daylight construction — the smoke DPG110-2D reduces visible light transmission for comfortable bright-sun wear while maintaining full Z87.1 impact protection and 99.9% UV blocking. The clear DPG110-1D is better suited for shaded areas or late-day work. Neither lens is polarized, so glare off reflective horizontal surfaces is not filtered. For polarized options, see our Best Polarized Safety Glasses guide.

How does the DEWALT DPG110 compare to safety goggles for dust protection?

The DPG110 is an open-frame half-frame safety glass — it does not seal against the face. For environments with fine airborne dust, chemical mist, or splash risk, a sealed-frame goggle provides superior protection. Read our Safety Glasses vs Safety Goggles comparison to determine which format your hazard assessment requires.

Is the DEWALT DPG110 half-frame design compatible with face shields?

Yes — this is one of the DPG110's primary design advantages. The low-profile half-frame sits close to the face without creating a pressure ridge against most face shield brow bars. It provides a compliant secondary eye barrier beneath the shield without the fit interference common with full-frame or wrap-style safety glasses.

What scratch protection does the DEWALT DPG110 have?

DEWALT applies a scratch-resistant (AS) coating to both lens variants. This extends optical clarity and lens service life on dusty job sites, but does not make the lens scratch-proof. Using lens cleaning wipes rather than abrasive cloths, and storing the glasses in a case or microfiber pouch when not in use, will maximize the coating's effective life.

How long should DEWALT DPG110 safety glasses last with daily industrial use?

Under moderately demanding conditions with regular cleaning, expect 3–4 months of service life before lens scratching and optical degradation justify replacement. Replace immediately if the frame is cracked, the lens is deeply scratched, or the frame has been subject to an impact event — impact-tested frames are not re-rated after a strike.

What is the difference between the DPG110-1D and DPG110-2D?

The DPG110-1D has a clear lens suited for indoor, shaded, and low-light use. The DPG110-2D has a smoke lens for bright outdoor daylight. Frame geometry, ANSI certification, scratch-resistant coating, UV protection, and rubberized temple grip are identical across both variants. The choice depends entirely on your lighting environment.

Are DEWALT safety glasses made in the USA?

DEWALT does not publicly specify domestic manufacture for the DPG110 in its product documentation. DEWALT is a Stanley Black & Decker brand and its safety eyewear is produced through third-party manufacturing partners. If country of origin is a procurement requirement, contact DEWALT directly or consult your distributor's compliance documentation.

Can the DEWALT DPG110 be used for welding?

No. The DPG110 is not a welding lens. It carries no shade rating and does not filter infrared radiation or welding arc intensity. Using non-welding safety glasses during welding operations does not provide the eye protection required by OSHA 29 CFR 1910.133 for welding tasks. See our Best Welding Safety Glasses guide and our Welding Safety Collection for compliant welding eye protection.

Is the DEWALT DPG110 available in bifocal or reader versions?

No. The DPG110 does not offer bifocal or reader magnification options. Workers who need magnification for close-up tasks should look at dedicated bifocal safety glasses covered in our Bifocal and Reader Safety Glasses Guide.

Sources. Requirements referenced here come from OSHA 29 CFR 1910 and the NIOSH recommendations. Where a consensus standard governs, the ANSI document is named in the text.

Related reference

If this page is part of a wider question, the neighbouring references are 3m 11329 virtua ccs ap protective safety goggles review, 3m 2800 otg eyeglass protectors safety goggles review, 3m 91252 chemical splash impact safety goggle anti fog review, 3m bx reader safety glasses review, 3m centurion 452af impact safety goggle clear anti fog review, 3m centurion 454af safety splash goggle clear anti fog review, 3m dbi sala suspension trauma safety strap review and 3m gg3001ssgaf gogglegear 3000 series safety review. Each covers one standard or one figure, so they can be read in any order.

Further reading in the same area: 3m gg501sgaf gogglegear 500 series safety goggles review, 3m gogglegear 500 gg501sgaf clear scotchgard safety goggles review, 3m infrared welding flip up shade 3 safety glasses review, 3m nuvo reader safety glasses review, 3m securefit safety glasses review, 3m securefit x5000 safety helmet review, 3m securefit x5007 safety helmet review, 3m sf3701sgaf securefit anti fog safety goggles review.

Neighbouring topics that come up in the same decision: 3m solus 1000 series safety glasses review, 3m solus 2000 series safety glasses review, 3m virua ap safety glasses review, 3m virua ccs safety glasses review, 16 25 gallon trash bags bulk 520 review, 24 7 first aid 59554 100 person kit review, 310 pint lgr commercial dehumidifier review, 33 gallon trash bags 1 6 mil 150 review.

Why trust WC Safety

WC Safety is an independent, affiliate-supported review site. It is not a retailer: it holds no inventory, takes no orders, and earns only from qualifying purchases through clearly marked links — which never changes what a product is rated to do. Standards language is taken from the regulation text directly, and ratings are reported as the manufacturer publishes them. We run no laboratory and perform no testing of our own. Where published sources disagree, we say so and plan on the conservative figure rather than the flattering one.

Our methodology

Figures come from the regulation and the published specification, in that order. Derated numbers are calculated, not estimated. Nothing here is presented as a measured result, because we measure nothing.

Researched and written by Steven Eaton, editor of WC Safety. Steven holds no safety certification and does not test products; this page compares what manufacturers and regulators publish, with the gaps in that record marked. Last reviewed August 2026.