DEWALT Crosscut Safety Glasses (DPG100) — Z87+ Wraparound, Polycarbonate, Hard-Coat
$9.39
Final price set by Amazon · may vary
Lens Color: Translucent / Clear
EDITORIAL REVIEW: 4.5/5 WC Safety Review — DEWALT Crosscut Safety Glasses Editorial assessment by the WC Safety Editorial Team, based on published DEWALT specifications and category fit. We did not laboratory-test...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 WC Safety Review — DEWALT Crosscut Safety Glasses
Editorial assessment by the WC Safety Editorial Team, based on published DEWALT specifications and category fit. We did not laboratory-test this product.
CHECK PRICE ON AMAZON →SHOP EYE PROTECTION →
As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure.
DEWALT Crosscut Safety Glasses (DPG100) — Z87+ Wraparound, Polycarbonate, Hard-Coat Overview
The DEWALT Crosscut (DPG100) safety glasses are an open-frame, wraparound spectacle built for flying-debris work — cutting, grinding, drilling, fastening, and general jobsite tasks. The high-impact polycarbonate lens carries an ANSI/ISEA Z87.1+ rating (the "+" denotes high-velocity impact), with a hard-coat finish for scratch resistance and 99.9% UVA/UVB filtering. A black half-frame holds a wide wraparound lens that extends coverage to the sides, while a soft rubber nosepiece and no-slip rubber temples keep the frame planted during movement and sweat.
This is a spectacle, not a sealed goggle: it guards the front and sides of the eye against impact, but it does not seal against liquid splash, fine dust, or mist. For wet, dusty, or chemical tasks, step up to a sealed safety goggle. If you need impact protection for open-air cutting and assembly, the Crosscut sits squarely in the safety glasses category. The line ships in several lens tints — clear for indoor work, smoke/gray for outdoor glare, and indoor/outdoor for in-and-out tasks — so match the tint to your light using our lens color chart. New to spec selection? Start with the safety glasses buyer's guide or review the full Z87.1 standard for how impact and marking classes work.
What It Is Built For
| Use case | Fit | Buyer guidance |
|---|---|---|
| Cutting, grinding, drilling, fastening (impact) | Strong fit | Z87+ high-impact polycarbonate plus wraparound side coverage handle flying chips and debris. |
| Indoor shop, garage, or low-light assembly | Good fit (clear lens) | Choose the clear-lens Crosscut for true color and full light transmission indoors. |
| Bright outdoor / glare-heavy work | Good fit (smoke/gray lens) | Pick the smoke/gray Crosscut variant for outdoor glare; see the lens color chart to match light. |
| In-and-out (frequent indoor/outdoor) | Good fit (I/O lens) | Select the indoor/outdoor (I/O) Crosscut variant so you do not swap eyewear at the door. |
| Liquid splash, chemicals, or mist | Not suitable | Open-frame glasses do not seal — use a D3-rated sealed splash goggle instead. |
| Heavy fine dust, sanding, or grinding dust | Limited | Spectacles do not seal out fine dust; use a D4/D5 sealed goggle for dusty environments. |
Safety eyewear must meet ANSI/ISEA Z87.1-2020 and be matched to the hazard — Z87+ for high-impact work, the correct lens tint for the light, and a sealed safety goggle for chemical splash or fine dust where open-frame glasses leave gaps. Under OSHA 29 CFR 1910.133, employers must provide eye protection suited to the hazard. Replace any lens that is scratched or pitted, since surface damage weakens impact resistance. See our safety glasses buyer's guide.
Pros & Cons
Pros
- ANSI/ISEA Z87.1+ high-impact polycarbonate lens rated for high-velocity debris
- Wraparound half-frame adds side coverage without a separate side shield
- Hard-coat lens resists scratches and 99.9% UVA/UVB filtering protects against sun
- Soft rubber nosepiece and no-slip rubber temples stay put during sweat and movement
- Offered in clear, smoke/gray, and indoor/outdoor tints to match your lighting
- Lightweight open-frame design is comfortable for all-day wear
Cons
- Open-frame spectacle — does not seal against splash, mist, or fine dust
- No sealed gasket, so not a substitute for a D3/D4/D5 goggle in wet or dusty work
- Anti-fog performance not specified on this listing — confirm if fogging is a concern
- Does not fit over most prescription eyeglasses; choose an OTG goggle for that
How It Compares
Within DEWALT's spectacle lineup, the Crosscut (DPG100) is the lightweight half-frame wraparound built for everyday impact work, with rubber nose and temple grips. The DEWALT Dominator (DPG94) is a fuller-frame spectacle with a more aggressive sport-wrap profile and full rubber overmold for heavier-duty wear. If you need protection that seals against splash and dust, neither spectacle qualifies — step up to the DEWALT Concealer goggle class instead. Choose the Crosscut when you want a low-profile, all-day spectacle for cutting and assembly; choose a sealed goggle the moment liquids, mist, or fine dust enter the job. To compare across brands and price points, see our best safety glasses roundup.
Specifications
| Form factor | Open-frame wraparound spectacle (not a sealed goggle) |
| Lens material | Polycarbonate (high-impact) |
| Impact rating | ANSI/ISEA Z87.1+ (high-velocity impact, '+' marked) |
| Lens coating | Hard-coat (scratch-resistant); 99.9% UVA/UVB protection |
| Lens tint | Offered in clear, smoke/gray, and indoor/outdoor — confirm variant on listing |
| Frame | Black half-frame with wraparound lens |
| Fit features | Soft rubber nosepiece + no-slip rubber temples |
| OTG (over-glasses) | No — not designed to fit over prescription eyewear |
| Series / model | DEWALT Crosscut, DPG100 |
Related Resources
safety glasses eye protection safety goggles anti-fog safety glasses clear lens safety glasses tinted safety glasses safety glasses buyer's guide best safety glasses anti-fog guide how to size safety glasses
Frequently Asked Questions
Are the DEWALT Crosscut safety glasses ANSI Z87.1 rated?
Yes. The Crosscut (DPG100) lens carries an ANSI/ISEA Z87.1+ marking, where the '+' indicates it passed the high-velocity (high-impact) test. The polycarbonate lens is built for flying debris from cutting, grinding, and drilling. For how the Z87 marking system works, see our Z87.1 standard guide: /blogs/guides/what-is-ansi-isea-z87-1-2020-safety-glasses-standard
Are these safety glasses or sealed goggles?
They are open-frame safety glasses (spectacles), not sealed goggles. The wraparound lens adds front and side impact coverage, but there is no gasket, so they do not seal against liquid splash, mist, or fine dust. If you need a seal, shop our safety goggles: /collections/safety-goggles
Will the Crosscut protect against chemical splash?
No. Open-frame glasses are not splash-rated and do not keep liquids out. Chemical splash work requires a D3-rated sealed goggle. Browse sealed options in eye protection: /collections/eye-protection
What lens tint should I choose?
Match the tint to your light: clear for indoor and low-light work, smoke/gray for bright outdoor glare, and indoor/outdoor (I/O) for tasks that move in and out. The Crosscut line is offered in these tints — confirm the variant on this listing. Our lens color chart explains each: /blogs/reference/safety-glasses-lens-color-chart
Are the Crosscut lenses anti-fog?
Anti-fog treatment is not specified for this listing, so we won't claim it. If fogging is a concern in your environment, see our fog-prevention tips or shop a dedicated anti-fog lens: /blogs/reference/how-to-prevent-safety-glasses-fogging and /collections/anti-fog-safety-glasses
Do these fit over prescription eyeglasses?
No. The Crosscut is a standard spectacle and is not designed as an OTG (over-the-glasses) model. If you wear prescription glasses, choose an OTG goggle that fits over them. Browse the goggle category: /collections/safety-goggles
What is the lens made of?
The lens is high-impact polycarbonate, the standard material for Z87+ impact protection. It carries a hard-coat finish for scratch resistance and filters 99.9% of UVA/UVB. Learn more in our buyer's guide: /blogs/guides/safety-glasses-buyers-guide
Are these good for grinding and metal cutting?
Yes for the impact hazard — the Z87+ polycarbonate lens and wraparound coverage handle flying chips and sparks-driven debris. For heavy grinding dust, add a sealed goggle, since spectacles do not seal out fine dust. See dust-rated options: /collections/eye-protection
How do I keep the lenses scratch-free?
The hard-coat helps, but cleaning technique matters: rinse grit off first, then use a microfiber cloth — never dry-wipe a gritty lens. Full steps are in our cleaning guide: /blogs/reference/how-to-clean-safety-glasses
How do these compare to other DEWALT safety glasses?
The Crosscut (DPG100) is the lightweight half-frame wraparound for everyday impact work, while the DEWALT Dominator (DPG94) is a fuller-frame, heavier-overmold spectacle. For splash or dust sealing, neither qualifies — use a goggle. Compare across the field in our best safety glasses roundup: /blogs/guides/best-safety-glasses-2026
Will the Crosscut fit my face size?
It's a standard-fit wraparound with rubber temples and a soft rubber nosepiece that grips a range of face shapes. If you're between sizes or need a snugger fit, check our sizing walkthrough: /blogs/how-to-guide/how-to-size-safety-glasses
Do these block UV from sunlight?
Yes. The lens provides 99.9% UVA/UVB protection, so the smoke/gray and indoor/outdoor variants double as UV-blocking outdoor eyewear. For tinted outdoor options across brands, see: /collections/tinted-safety-glasses
Written by Steven Eaton, WC Safety Editorial. Specifications sourced from DEWALT published data. Compare the range in safety glasses.
WC Safety is an independent PPE retailer and Amazon Associate; no paid placement. Match the product to your specific hazard and follow your site PPE program.
Brand / Vendor
DEWALT
Model / SKU
DPG100T-1D
Product Type
Safety Glasses
Price
$9.39 (Amazon)
Rating
4.0 / 5 — 7 reviews
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews
Customer Reviews
★★★★☆4.1 / 5· 89 ratings on Amazon
★☆☆☆☆
Not very dark
They are not very dark. The clear frames also let the sun in your eyes.
Verified Purchaser · March 21, · ✓ Amazon Verified Purchase
★★★★★
These are Awesome!!
These are Awesome!!Very lightweight, comfortable, and not so dark that you feel like Ray Charles every time you put them on!I think I might have even gotten them on sale at the time!
Verified Purchaser · March 17, · ✓ Amazon Verified Purchase
★★★★☆
Really like these
Pretty good safety glasses. Comfortable, good protection, only gave 4 stars because it would be better if they were polarized. I do recommend these though.
Verified Purchaser · August 28, · ✓ Amazon Verified Purchase
★★★★★
Love it
Love this safety sunglasses fit very well, very comfy and good eye protection
Verified Purchaser · April 25, · ✓ Amazon Verified Purchase
★★★★★
Tough Eyewear
Love themVery comfortable
Verified Purchaser · March 9, 2 · ✓ Amazon Verified Purchase
★★★☆☆
They are light and comfortable but a bit cheap filling
They are comfortable except for when the nose cusion falls off, which is immediately. They are nice but wish it had more of a uv coating, the dark tint is a bit soft vs the indoor/outdoor of this model is much better on UV protector but the same issue with the nose cusion.
Verified Purchaser · August 24, · ✓ Amazon Verified Purchase
★★★★★
Me encantaron los compré para mi
Verified Purchaser · September · ✓ Amazon Verified Purchase
Showing 7 of 89 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.