🔍 Click to zoom
TRADESAFE Plug Lockout — 110-125V Power Cord Lockout Device
$13.95
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.4/5 — WC Safety Review of the TRADESAFE Plug Lockout, an electrical plug lockout device. Editorial assessment by Steven Eaton, WC Safety editor, based on the published TRADESAFE listing and OSHA ...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.4/5 — WC Safety Review of the TRADESAFE Plug Lockout, an electrical plug lockout device.
Editorial assessment by Steven Eaton, WC Safety editor, based on the published TRADESAFE listing and OSHA 29 CFR 1910.147. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on the published TRADESAFE listing and OSHA 29 CFR 1910.147. We did not laboratory-test this product.
The TRADESAFE plug lockout is a device that encloses a 110-125V power cord plug so it cannot be re-inserted while equipment is serviced — it controls the plug; it does not replace a written procedure or the verification the standard requires.
CHECK PRICE ON AMAZON → SHOP PLUG LOCKOUTS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the TRADESAFE Plug Lockout controls cord-and-plug energy
Cord-and-plug equipment has a deceptively simple energy source: the plug. If it can be quietly pushed back into an outlet while someone is working, unplugging alone is not protection. The TRADESAFE plug lockout encloses the 110-125V plug and accepts a padlock, so it stays out of the outlet until the authorized worker removes their lock. As plug lockouts go, this is the cord-and-plug pick, and the complete LOTO guide and the best kits guide put it in context. It stops a plug from being quietly re-inserted mid-service.
Safety first: a plug lockout encloses the plug, but hardware is only half the job — OSHA 29 CFR 1910.147 requires a written energy-control procedure and a verified zero-energy state. After locks and tags are applied you must test to confirm a zero-energy condition (the try-out step) before any work begins; this device does not make a program compliant without a documented procedure, authorized-worker training, and verification. Never remove another worker's lock.
What the TRADESAFE Plug Lockout listing documents
From the published listing: an enclosure sized for 110-125V power cord plugs; a padlock-accepting design for personal lock control; a rigid plug enclosure; and alignment to OSHA 29 CFR 1910.147. These are true electrical plug lockout and cord and plug lockout credentials as a power cord lockout. Confirm the plug fit and padlock hole on the listing. Remember that under the standard it is the written procedure, the authorized-worker training, and the verification step — not the hardware alone — that make a lockout defensible in an audit, so treat this device as one documented part of that larger program rather than a stand-alone solution.
How the TRADESAFE Plug Lockout compares to other lockout hardware
Weigh it against the Master Lock 410GRN, the TRADESAFE TS1KD10R, the BULANGDI stainless hasp, the Bozzys 6-hole hasp, the TRADESAFE station. The best padlocks guide ranks the field.
Choosing the right lockout hardware
Effective energy control matches the device to the energy type: padlocks and hasps for breakers and valves that accept a lock, cable lockouts for multi-point or oversized geometry, plug lockouts for cord-and-plug equipment, and tags to identify every isolation and the worker who applied it. Build the full kit around the device so a technician is never missing the one piece a machine needs. Browse the lockout/tagout, lockout padlocks, lockout hasps, cable lockouts, plug lockouts, lockout tags collections; and read the OSHA PPE requirements guide and the NFPA 70E arc-flash guide for the electrical energy control that many lockouts also involve.
Where it fits by application and crew orders
The TRADESAFE plug lockout suits corded tools, portable equipment, and appliances on 110-125V circuits where the plug is the energy source to control — Browse the wider lockout/tagout range, keep it organized on a ABUS 2ALHB or TAEGIQ station, and pair it with a keyed padlock so the plug stays locked to one worker. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
What OSHA actually requires of a lockout device
Lockout/tagout is governed by OSHA 1910.147, the control of hazardous energy, and the standard is unusually specific about the hardware. Devices must be durable enough for the environment, standardised within the facility by color, shape or size, substantial enough that removal requires excessive force or tools, and identifiable — they must name the worker who applied them.
The rule that catches people out is exclusive use: lockout devices may not be used for anything else. A padlock that also secures a gate or a toolbox is not a compliant lockout device, whatever its build quality. Keyed-different is the norm so no one can remove another worker's lock; keyed-alike sets exist for single-authorised-employee programmes and group lockout boxes, and choosing the wrong keying defeats the point of the standard.
Hardware is the smallest part of compliance. 1910.147 also requires written energy-control procedures, periodic inspection and authorised-employee training.
Frequently asked questions
What is the TRADESAFE Plug Lockout?
A device that encloses a 110-125V power cord plug so it cannot be re-inserted during service, aligned to OSHA 29 CFR 1910.147.
When do I use a plug lockout?
When a machine or tool is powered by a cord and plug, a plug lockout encloses the plug so it cannot be re-inserted while someone services the equipment - controlling that cord-and-plug energy source.
What plugs does it fit?
A device that encloses a 110-125V power cord plug so it cannot be re-inserted during service, aligned to OSHA 29 CFR 1910.147.
How does it secure the plug?
The device encloses the plug end and accepts a padlock, so the plug stays locked away from the outlet until the authorized worker removes their lock. Confirm the padlock hole size on the listing.
Does it come with a padlock?
Confirm on the listing; most plug lockouts accept a standard lockout padlock, sold separately. Pair it with an individually keyed padlock for personal control.
Can one worker rely on a plug lockout alone?
For cord-and-plug equipment under the exclusive control of the worker servicing it, unplugging plus a plug lockout can control the energy. Confirm this matches your written procedure.
What pairs with it?
An individually keyed lockout padlock and a tag identifying the lockout. A lockout station keeps the kit organized. Confirm compatibility on each listing.
Is it durable?
Confirm the material and clamshell design on the listing; a rigid enclosure resists prying and accidental re-insertion better than a light cover.
Is it OSHA compliant?
Plug lockouts support OSHA 29 CFR 1910.147 control of cord-and-plug energy. The device does not replace the written procedure, training, or verification. Confirm details on the listing.
How do I care for it?
Keep the hinge and lock hole clean and functioning, and retire any unit that no longer closes securely, since a plug lockout that can be opened does not control the energy.
Does the plug lockout make me compliant?
No - hardware is necessary but not sufficient. Compliance requires a written procedure, authorized-worker training, application of locks and tags, and verification of a zero-energy state before work.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Brand / Vendor
TRADESAFE
Model / SKU
—
Product Type
Plug Lockout
Price
$13.95 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the TRADESAFE Plug Lockout?
A device that encloses a 110-125V power cord plug so it cannot be re-inserted during service, aligned to OSHA 29 CFR 1910.147.
When do I use a plug lockout?
When a machine or tool is powered by a cord and plug, a plug lockout encloses the plug so it cannot be re-inserted while someone services the equipment - controlling that cord-and-plug energy source.
What plugs does it fit?
A device that encloses a 110-125V power cord plug so it cannot be re-inserted during service, aligned to OSHA 29 CFR 1910.147.
How does it secure the plug?
The device encloses the plug end and accepts a padlock, so the plug stays locked away from the outlet until the authorized worker removes their lock. Confirm the padlock hole size on the listing.
Does it come with a padlock?
Confirm on the listing; most plug lockouts accept a standard lockout padlock, sold separately. Pair it with an individually keyed padlock for personal control.
Can one worker rely on a plug lockout alone?
For cord-and-plug equipment under the exclusive control of the worker servicing it, unplugging plus a plug lockout can control the energy. Confirm this matches your written procedure.
What pairs with it?
An individually keyed lockout padlock and a tag identifying the lockout. A lockout station keeps the kit organized. Confirm compatibility on each listing.
Is it durable?
Confirm the material and clamshell design on the listing; a rigid enclosure resists prying and accidental re-insertion better than a light cover.
Is it OSHA compliant?
Plug lockouts support OSHA 29 CFR 1910.147 control of cord-and-plug energy. The device does not replace the written procedure, training, or verification. Confirm details on the listing.
How do I care for it?
Keep the hinge and lock hole clean and functioning, and retire any unit that no longer closes securely, since a plug lockout that can be opened does not control the energy.
Does the plug lockout make me compliant?
No - hardware is necessary but not sufficient. Compliance requires a written procedure, authorized-worker training, application of locks and tags, and verification of a zero-energy state before work.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.