🔍 Click to zoom
TRADESAFE lockout tagout station 14-pack
$194.95
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.6/5 WC Safety Review — the TRADESAFE lockout tagout station 14-pack Editorial assessment by Steven Eaton, WC Safety editor, based on published TRADESAFE specifications and category fit. We did ...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.6/5 WC Safety Review — the TRADESAFE lockout tagout station 14-pack
Editorial assessment by Steven Eaton, WC Safety editor, based on published TRADESAFE specifications and category fit. We did not laboratory-test this product.
CHECK PRICE ON AMAZON →SHOP LOCKOUT STATIONS →
As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure.
TRADESAFE Lockout Tagout Station 14-Pack Overview
The TRADESAFE lockout tagout station 14-pack includes 14 red lockout padlocks, 6 group lockout hasps, 40 lockout tags, 40 nylon cable ties, and a wall-mount kit board. As the TRADESAFE 14 lock LOTO station, each padlock is keyed different with 2 keys, a nylon unibody, and a stainless steel shackle.
Safety note: owning lockout/tagout hardware is not the same as having a compliant program. This lockout tagout station with kit board addresses stored-energy hazards (electrical, mechanical, hydraulic, pneumatic) during servicing, not a chemical splash hazard or other liquid exposure risk. It is marketed to help meet OSHA 29 CFR 1910.147 requirements, but OSHA does not formally certify or approve specific commercial products - your actual compliance depends on a complete written LOTO program, authorized employee training, and periodic inspections, not just owning this hardware.
The group lockout hasp station 6 hasps includes 4 at 1-inch and 2 at 1.5-inch interior jaw diameter, letting multiple workers each apply an individual lock to a single lockout point. This OSHA-compliant LOTO station kit and TRADESAFE lockout tagout wall station mounts on pre-drilled holes with included anchor screws. See our what is lockout tagout guide and our how to perform lockout tagout guide for the full procedure.
What It Is Built For
| Use case | Fit | Buyer guidance |
|---|---|---|
| Group lockout with multiple authorized workers | Strong fit | 14 keyed-different locks and 6 hasps support multi-worker lockout points. |
| Central, fixed-location LOTO device storage | Strong fit | Wall-mount board with mounting hardware included. |
| Full facility LOTO compliance on hardware alone | Not sufficient alone | Pair with a written program, training, and periodic inspections. |
| Electrical plug or cable-specific lockout | Not included | This kit covers padlocks/hasps/tags - add dedicated plug or cable lockout devices separately if needed. |
Pros & Cons
Pros
- 14 keyed-different padlocks with brass core cylinders
- 6 hasps in two jaw sizes for different lockout points
- 40 durable PVC tags plus 40 cable ties
- Wall-mount board with included anchor screws
- Designed to support OSHA 1910.147 compliance
Cons
- No plug, cable, or valve-specific lockout devices included
- Hardware alone does not equal a compliant LOTO program
- Fixed 14-lock/6-hasp/40-tag configuration - not user-customizable
- Requires separate written program and training to be OSHA-compliant
How It Compares
Compare against the TAEGIQ 12-padlock lockout tagout station for a smaller configuration, or the BULANGD 138-piece cabinet kit for a larger, more complete inventory including cable and plug locks. For individual restock items, see TRADESAFE lockout tagout tags and TRADESAFE TS1KD10R lockout locks. Browse the full lockout/tagout collection and see our best lockout tagout kits guide for more options.
Specifications
| Brand | TRADESAFE |
| Padlocks | 14, keyed different, 2 keys each, nylon unibody, stainless steel shackle |
| Hasps | 6 total (4x 1-inch, 2x 1.5-inch jaw), chrome-plated steel jaw |
| Tags / ties | 40 PVC tags with brass grommet, 40 nylon cable ties |
| Station board | Yellow, wall-mount, pre-drilled with anchor screws included |
Related Lockout/Tagout Resources
lockout/tagout lockout stations lockout padlocks lockout hasps lockout/tagout tags best lockout tagout kits best lockout tagout padlocks lockout tagout complete guide what is lockout tagout (LOTO) how to perform lockout tagout lockout vs tagout difference
Frequently Asked Questions
What's included in this lockout tagout station?
14 red lockout padlocks (keyed different, 2 keys each), 6 group lockout hasps (4 at 1-inch and 2 at 1.5-inch jaw diameter), 40 lockout tags with brass grommets, 40 nylon cable ties, and a yellow wall-mount station board with mounting hardware.
Are the padlocks keyed alike or keyed different?
Keyed different. Each padlock has its own unique key set (2 keys per lock), which is standard for group lockout stations where multiple workers each need to apply and remove their own individual lock.
Is this station OSHA compliant?
TRADESAFE designs this station to help meet OSHA lockout/tagout requirements under 29 CFR 1910.147. OSHA does not formally certify or approve specific commercial products, so "compliant" describes design intent - your actual compliance depends on your complete written LOTO program, training, and procedures, not just owning this hardware.
What are the hasps used for?
Group lockout hasps let multiple workers each apply an individual padlock to a single lockout point, so equipment can't be re-energized until every worker has removed their lock. This station includes 6 hasps in two jaw sizes (1-inch and 1.5-inch) to fit different lockout points.
What material are the padlocks made of?
A non-conductive nylon unibody body with a corrosion-resistant stainless steel shackle and a key-retaining brass core cylinder - suited to general industrial lockout use.
How do I mount the station board?
The board includes pre-drilled mounting holes and comes with anchor screws for wall mounting. Choose a central, accessible location near the equipment or work area it's meant to serve.
How many workers can use this station?
With 14 individually keyed padlocks, this station can support up to 14 individual lockout applications at once, though actual usable capacity per lockout point depends on hasp jaw size and how many locks each hasp can hold.
What's the difference between lockout and tagout?
Lockout physically prevents equipment from being operated using a lock; tagout uses a warning tag to indicate a hazard without physically preventing operation. Best practice combines both - a lock plus a tag - so both a physical barrier and a written warning are in place during service or maintenance.
How is this different from the smaller TRADESAFE or competitor stations?
This is the 14-pack configuration with 6 hasps and 40 tags. TRADESAFE and other brands sell smaller and larger stations with different padlock, hasp, and tag counts - confirm you're comparing the exact same configuration before assuming features or pricing carry over.
Do I need a written LOTO program in addition to this hardware?
Yes. OSHA 29 CFR 1910.147 requires a written lockout/tagout program covering procedures, authorized employee training, and periodic inspections - this station provides the physical hardware, not the program documentation or training itself.
Can I restock tags and locks separately?
Yes. TRADESAFE and other manufacturers sell individual lockout tags, padlocks, hasps, and cable locks separately, so you can restock consumable items like tags without replacing the whole station.
How do I choose between this and a lockout cabinet kit?
A wall-mount station like this one suits a fixed central location for a specific area or department. A larger cabinet-style kit may suit facilities needing a bigger, more organized inventory of LOTO devices in one place. Match the format to your facility's layout and workflow. See our best lockout tagout padlocks guide for how to evaluate individual lock quality.
Written by Steven Eaton, WC Safety Editorial — industrial safety desk. Component list independently verified against the exact-ASIN retailer listing. Compare the range in lockout stations.
WC Safety is an independent PPE review site and Amazon Associate; no paid placement. A compliant LOTO program requires written procedures and training beyond this hardware.
Brand / Vendor
TRADESAFE
Model / SKU
—
Product Type
Lockout Station
Price
$194.95 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.