Skip to content
Industrial Safety Equipment, PPE Guides & Reviews
Industrial Safety Equipment, PPE Guides & Reviews

KleenGuard Safety Glasses

ANSI/ISEA Z87.1+ High Impact · Nemesis V30 · 18 Lens & Frame Variants · Kimberly-Clark Professional

Which KleenGuard safety glasses should you choose?

Short answer: the choice here is the lens, not the frame. The Nemesis V30 comes in eighteen variants on one Z87.1+ wraparound platform — clear anti-fog for indoor work, gray or smoke mirror for outdoors, indoor/outdoor for moving between the two, amber for low light, and shade 3 or shade 5 for torch work. Two of the eighteen are nemesis polarized safety glasses, for glare off metal or water. Every variant carries the same impact rating; what changes is what you can see through it.

VIEW THE NEMESIS V30 →CHECK PRICE ON AMAZON →

Editor's pick: the Nemesis V30 in clear anti-fog — anti-fog is the feature that decides whether safety glasses stay on a face during real work, and the clear lens keeps the widest range of tasks available.

Affiliate disclosure: WC Safety is an independent review site. As an Amazon Associate we earn from qualifying purchases made through links on this page, at no extra cost to you. We do not sell products directly, and no brand paid for placement.

Our methodology: how this collection was curated

We record the ANSI/ISEA Z87.1 marking exactly as the manufacturer states it and treat lens tint as a visibility feature rather than a protection level, because the two get conflated constantly. Variants are listed in full where a single product carries many, since a grid view shows only the default. And where a brand's other models exist on this site but are not in this collection, we link them and say so rather than leaving the impression that one product is the whole range.

KleenGuard Safety Glasses (2026)

KleenGuard is the industrial PPE line from Kimberly-Clark Professional, spanning eye protection, respirators and coveralls. Its safety eyewear is built to ANSI/ISEA Z87.1, published through ANSI, and carries the + suffix — the mark for passing the high-velocity impact test rather than the basic-impact one. That distinction is the single most useful thing on a pair of safety glasses, and it is what OSHA 29 CFR 1910.133 is pointing at when it requires eye protection appropriate to the hazard. Our explainer on the plus mark covers what the test involves.

What this collection covers — and what sits outside it

This collection currently holds one product — the KleenGuard Nemesis safety glasses platform known as the Nemesis V30 — in eighteen variants:

  • Clear and anti-fog — clear, clear anti-fog, and gray anti-fog, in black or camo frames. The everyday indoor choices.
  • Tinted for outdoors — smoke mirror, blue mirror, bronze, amber, light blue, and indoor/outdoor for moving between lighting conditions.
  • Polarized — polarized gray on gunmetal and polarized brown, for glare off sheet metal, glass or water.
  • Welding shades — shade 3 and shade 5 IR variants for torch, braze and cutting work. See welding safety glasses for the full shaded range and the limits that apply.

Two other KleenGuard safety glasses exist on this site but are not in this collection: the Maverick, a Z87.1+ wraparound sport frame in four anti-fog and anti-glare variants, and the Nemesis VL, a rimless Z87.1+ frame in six variants including a shade 5 IR. We link them here because a brand page that shows one of three models would otherwise misrepresent the range.

KleenGuard's other PPE on this site: Monogoggle chemical splash goggles in safety goggles, the 3300 Series N95 in N95 respirators, and the A40 coverall in disposable coveralls. For the wider category see safety glasses.

Nemesis V30 lens options

Lens Best for Impact rating Filters IR?
Clear / Clear anti-fog Indoor, general work Z87.1+ No
Smoke / Blue mirror Bright outdoor Z87.1+ No
Indoor/Outdoor Moving between both Z87.1+ No
Polarized gray / brown Glare off metal or water Z87.1+ No
Shade 3 / Shade 5 Brazing, torch cutting Z87.1+ Yes

How to choose between the nemesis safety glasses variants

Does lens tint change how much protection you get?

No, and this is the most useful thing to understand before ordering. Every Nemesis V30 variant carries the same ANSI/ISEA Z87.1+ high-impact rating, whether it is clear, smoke mirror or polarized. Tint changes light transmission — how comfortably you can see in bright or dim conditions — and nothing about how the lens resists a flying particle. The exceptions are the shade 3 and shade 5 variants, which add infrared filtering on top of the same impact rating. A dark lens that is not a rated shade filters glare, not radiant energy.

Are these safety sunglasses or safety glasses?

Both descriptions get used, and the distinction is worth being clear about. Nemesis safety sunglasses is a common way to describe the tinted and polarized variants, and they genuinely work as sunglasses outdoors — but they are safety glasses first, rated to Z87.1+, which ordinary sunglasses are not. The reverse substitution is the dangerous one: fashion sunglasses have no impact rating however dark they are, and should never stand in for safety eyewear on a jobsite.

When is polarized worth it, and when is it a problem?

Polarized lenses cut reflected glare, which makes them excellent around sheet metal, glass, wet surfaces and water. The trade-off is that polarization also interferes with some LCD screens and can make certain glare patterns disappear that you might want to see — laminated glass stress patterns, for instance. If your work involves reading instrument displays outdoors, try before committing a whole crew.

Does anti-fog actually matter?

More than most features on the spec sheet, because fogging is the single most common reason safety glasses come off a face mid-task, and glasses pushed up on a forehead protect nothing. Anti-fog coatings are consumable rather than permanent — they degrade with abrasive cleaning and with time — so treat them as a wear item and clean with a proper lens cloth. Our anti-fog guide and anti-fog vs anti-scratch cover the trade-off, since the two coatings pull in opposite directions.

Is the Nemesis the same as the Jackson Safety Nemesis?

They share a lineage. KleenGuard and Jackson Safety are both Kimberly-Clark brands and the Nemesis line has appeared under both names over the years, which is why searches split between them. On this site the Jackson Safety Nemesis is a separate listing with its own specification, so check the individual product rather than assuming the two are interchangeable.

Fit, care, and replacement

Wraparound frames like the V30 earn their keep by covering the temple gap that flat lenses leave, which is where side-impact and dust ingress actually happen. Check that the frame sits close enough at the brow and cheek that debris cannot route around the lens, and remember that a frame which pinches gets adjusted or removed rather than tolerated.

Replace safety glasses when the lens is pitted, deeply scratched, or crazed, because scratches scatter light and make close work harder — which changes behavior long before the lens fails structurally. Any pair that has taken a genuine impact should be retired even if it looks intact, since the lens has already done its job once. For the standard itself see ANSI Z87.1 explained and what changed in the 2020 revision, and for this model specifically, our Nemesis V30 review.

KleenGuard safety glasses FAQ

What does Z87.1+ mean on KleenGuard safety glasses?

It means the product passed the high-velocity impact test in ANSI/ISEA Z87.1, rather than the basic-impact test. Every variant of the Nemesis V30 carries it regardless of lens tint.

Does a darker lens mean more protection?

No. Tint changes light transmission, not impact resistance — all variants share the same Z87.1+ rating. Only the shade 3 and shade 5 variants add infrared filtering.

How many lens options does the Nemesis V30 have?

Eighteen variants across lens and frame combinations, including clear, clear anti-fog, smoke mirror, indoor/outdoor, blue mirror, amber, bronze, two polarized options, and welding shades 3 and 5.

Can I use the shade 3 or shade 5 variant for welding?

For torch work, brazing, soldering and light cutting, yes. Not for arc welding, which requires shade 10 to 14 and a helmet that also shields the face and neck.

Are nemesis safety sunglasses real sunglasses?

The tinted and polarized variants work as sunglasses outdoors and are safety-rated as well. The reverse is not true — ordinary sunglasses carry no impact rating and are not safety eyewear.

When should I choose polarized?

Where reflected glare is the problem — sheet metal, glass, wet surfaces, water. Be aware polarization can interfere with some LCD displays and mask certain glare patterns.

Does anti-fog wear out?

Yes. Anti-fog coatings are consumable and degrade with abrasive cleaning and time. Clean with a proper lens cloth and treat the coating as a wear item.

Do you carry the KleenGuard Maverick?

Yes, as a separate listing — a Z87.1+ wraparound sport frame in four variants — though it is not currently part of this collection. It is linked above.

What is the difference between the Nemesis V30 and the Nemesis VL?

The V30 is a wraparound frame with eighteen variants; the VL is a rimless design with six, including a shade 5 IR. Both are Z87.1+ and both are on this site, though only the V30 is in this collection.

Is KleenGuard the same as Jackson Safety?

Both are Kimberly-Clark brands and the Nemesis line has appeared under each, which is why searches split between them. Check the individual listing rather than assuming they are identical.

Do these come in prescription?

Not in this line. The Nemesis V30's eighteen variants include no prescription option, and we will not imply one exists.

When should safety glasses be replaced?

When the lens is pitted, deeply scratched or crazed, and always after a genuine impact even if they look intact — the lens has already absorbed one hit.

Why trust WC Safety on eye protection?

WC Safety reviews workplace PPE full-time as an independent affiliate site — we do not sell products, hold no inventory, and accept no paid placements. On a single-brand page that independence mostly means not overstating the range: this collection holds one model, two other KleenGuard safety glasses exist on this site outside it, and we link them rather than letting the page imply the Nemesis V30 is the whole line. We also keep lens tint and impact rating separate, because every variant here shares the same Z87.1+ mark and only the shaded ones filter infrared. Standards referenced are ANSI/ISEA Z87.1 and OSHA 29 CFR 1910.133. Reviewed by Steven Eaton, WC Safety editor. Last reviewed: July 2026.

KleenGuard Nemesis V30 Safety Glasses — Z87.1+ Wraparound

KLEENGUARD
Original price $6.09 - Original price $29.00
Original price
$6.09 - $29.00
$6.09 - $29.00
Current price $6.09

EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the KleenGuard Nemesis V30, a Z87.1+ wraparound with the widest variant range. Editorial assessment...

View full details