What is the cut resistance level of the Ergodyne 7061 ProFlex A6 Cut-Resistant PU Palm Gloves 21g?

These gloves are rated to ANSI/ISEA 105 Level A6 (3,000g+). Very high cut resistance for high-risk cutting, glass, and sheet metal operations. Always select a cut level appropriate to the specific hazard — higher ratings are not always required and can reduce dexterity.

What is the ANSI/ISEA 105 cut level rating system?

ANSI/ISEA 105 rates cut resistance from A1 (lightest, 200g blade force) to A9 (highest, 6,000g+). The rating is determined by a TDM-100 or CPPT test measuring the blade force required to cut through the glove material. Higher numbers = higher cut resistance.

What is the PU (polyurethane) coating on these gloves for?

The PU (polyurethane) coating provides grip on wet, oily, and dry surfaces, improves dexterity for handling parts, and protects the palm and fingers from minor abrasion. PU coatings are thin, lightweight, and ideal for precision parts handling and dry conditions.

Are Ergodyne cut-resistant gloves machine washable?

Most cut-resistant gloves with synthetic liners (HPPE, Dyneema, Spectra) can be machine washed in cold water on a gentle cycle. Air dry — do not tumble dry or use heat. Check the glove's care label. Replace if the liner loses structural integrity or the coating shows significant wear.

What industries use cut-resistant gloves?

Cut-resistant gloves are used in metal fabrication, glass handling, automotive assembly, packaging, food processing, construction, warehousing, and any application involving sharp edges, blades, or abrasive materials. OSHA 29 CFR 1910.138 (PPE for hands) requires hand protection when hazards are present.

How do I choose the right cut level?

Match the cut level to your specific hazard. Conduct a hand injury risk assessment: identify the sharpest material handled, the pressure applied, and the frequency of exposure. ANSI A1-A3 for light hazards, A4-A6 for medium, A7-A9 for severe. Avoid over-specifying — heavier cut protection often reduces grip and dexterity.

What sizes are available for Ergodyne cut-resistant gloves?

Cut-resistant gloves are typically available in sizes XS through 3XL. Measure around the widest part of your hand (excluding the thumb) in inches — this corresponds to glove size. Refer to the specific product size chart as sizing can vary by model.

Do cut-resistant gloves protect against punctures?

Cut resistance and puncture resistance are separate properties. ANSI/ISEA 105 tests both independently. A high cut-level glove may not have high puncture resistance. Check both ratings on the glove label when working with needles, wire, or pointed objects.

Do cut-resistant gloves protect against chemicals?

Standard cut-resistant gloves are not designed for chemical protection unless specifically rated. The ANSI/ISEA 105 standard includes chemical resistance ratings separately from cut resistance. For chemical hazards, use gloves rated for the specific chemical per OSHA 29 CFR 1910.138 and the relevant SDS.

Ergodyne ProFlex 7061 Cut Resistant Work Gloves

🔍 Click to zoom

View on Amazon

Ergodyne ProFlex 7061 Cut Resistant Work Gloves

Name: Ergodyne ProFlex 7061 Cut Resistant Work Gloves
Brand: Ergodyne
SKU: 7061-S
Price: 22.63 USD
Availability: InStock

Ergodyne SKU: 7061-S Cut Resistant Gloves GTIN: 0720476103226

★ ★ ★ ★ ★ 4.8 (234 Amazon ratings)

$13.57

Final price set by Amazon · may vary

Size: Small

Ergodyne ProFlex 7061 Cut Resistant Work Gloves The Ergodyne ProFlex 7061 is an ANSI A6 cut-resistant work glove for demanding industrial environments where high cut-level protection is required. A6 is a significant s...

Check Price on Amazon

🔒 Amazon Associate · You pay the same price · We earn a small commission

Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.

Curated SelectionExpert-chosen safety gear

Independently ReviewedUnbiased assessments — no manufacturer input

Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.

ANSI A6 Blue Cut Resistant Ergodyne High Cut Level ProFlex Work Gloves

Ergodyne ProFlex 7061 Cut Resistant Work Gloves

The Ergodyne ProFlex 7061 is an ANSI A6 cut-resistant work glove for demanding industrial environments where high cut-level protection is required. A6 is a significant step up from A4 — appropriate for metal recycling, heavy stamping operations, automotive glass, and scrap handling where standard A3 or A4 gloves are insufficient. The blue color aids in fragment detection in quality inspection environments. A lightweight shell construction maintains dexterity and comfort for extended use in high-cut-risk applications.

Key Features

ANSI A6 Cut Resistance — High-level cut protection for metal recycling, heavy fabrication, automotive glass, and scrap processing requiring protection beyond A4.
Blue Color — Provides visual contrast for contamination and fragment detection in quality-controlled manufacturing environments.
Lightweight Construction — Delivers A6-level cut protection without the weight and stiffness of heavy leather or multi-layer alternatives.
Dexterous Shell — Maintains tactile sensitivity and hand movement for precision handling tasks even at high cut protection levels.

Compliance

Meets ANSI/ISEA 105 A6 cut resistance. Required for environments with severe laceration risk including automotive glass, metal stamping, recycling, and heavy fabrication.