What is the cut resistance level of the Ergodyne 7040 ProFlex A4 Food Grade Cut-Resistant Gloves?

These gloves are rated to an ANSI/ISEA 105 cut level rated for the application described in the product title. Refer to the product listing for the specific ANSI cut rating. Always select a cut level appropriate to the specific hazard — higher ratings are not always required and can reduce dexterity.

What is the ANSI/ISEA 105 cut level rating system?

ANSI/ISEA 105 rates cut resistance from A1 (lightest, 200g blade force) to A9 (highest, 6,000g+). The rating is determined by a TDM-100 or CPPT test measuring the blade force required to cut through the glove material. Higher numbers = higher cut resistance.

What is the a coated coating on these gloves for?

The a coated coating provides grip on wet, oily, and dry surfaces, improves dexterity for handling parts, and protects the palm and fingers from minor abrasion.

Are Ergodyne cut-resistant gloves machine washable?

Most cut-resistant gloves with synthetic liners (HPPE, Dyneema, Spectra) can be machine washed in cold water on a gentle cycle. Air dry — do not tumble dry or use heat. Check the glove's care label. Replace if the liner loses structural integrity or the coating shows significant wear.

What industries use cut-resistant gloves?

Cut-resistant gloves are used in metal fabrication, glass handling, automotive assembly, packaging, food processing, construction, warehousing, and any application involving sharp edges, blades, or abrasive materials. OSHA 29 CFR 1910.138 (PPE for hands) requires hand protection when hazards are present.

How do I choose the right cut level?

Match the cut level to your specific hazard. Conduct a hand injury risk assessment: identify the sharpest material handled, the pressure applied, and the frequency of exposure. ANSI A1-A3 for light hazards, A4-A6 for medium, A7-A9 for severe. Avoid over-specifying — heavier cut protection often reduces grip and dexterity.

What sizes are available for Ergodyne cut-resistant gloves?

Cut-resistant gloves are typically available in sizes XS through 3XL. Measure around the widest part of your hand (excluding the thumb) in inches — this corresponds to glove size. Refer to the specific product size chart as sizing can vary by model.

Do cut-resistant gloves protect against punctures?

Cut resistance and puncture resistance are separate properties. ANSI/ISEA 105 tests both independently. A high cut-level glove may not have high puncture resistance. Check both ratings on the glove label when working with needles, wire, or pointed objects.

Do cut-resistant gloves protect against chemicals?

Standard cut-resistant gloves are not designed for chemical protection unless specifically rated. The ANSI/ISEA 105 standard includes chemical resistance ratings separately from cut resistance. For chemical hazards, use gloves rated for the specific chemical per OSHA 29 CFR 1910.138 and the relevant SDS.

Ergodyne ProFlex 7040 ANSI A5 Food Grade Cut Resistant Gloves

🔍 Click to zoom

View on Amazon

Ergodyne ProFlex 7040 ANSI A5 Food Grade Cut Resistant Gloves

Name: Ergodyne ProFlex 7040 ANSI A5 Food Grade Cut Resistant Gloves
Brand: Ergodyne
SKU: 7040-S
Price: 8.67 USD
Availability: InStock

Ergodyne SKU: 7040-S Cut Resistant Gloves GTIN: 0720476180128

★ ★ ★ ★ ★ 4.8

$6.75

Final price set by Amazon · may vary

Size: Small

Ergodyne ProFlex 7040 ANSI A5 Food Grade Cut Resistant Gloves The Ergodyne ProFlex 7040 is an ANSI A5 cut-resistant glove engineered for food processing and food handling environments requiring both high cut protectio...

Check Price on Amazon

🔒 Amazon Associate · You pay the same price · We earn a small commission

Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.

Curated SelectionExpert-chosen safety gear

Independently ReviewedUnbiased assessments — no manufacturer input

Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.

ANSI A5 Cut Resistant Ergodyne Food Grade Lime ProFlex Work Gloves

Ergodyne ProFlex 7040 ANSI A5 Food Grade Cut Resistant Gloves

The Ergodyne ProFlex 7040 is an ANSI A5 cut-resistant glove engineered for food processing and food handling environments requiring both high cut protection and food-grade compliance. The food-safe construction meets requirements for direct food contact while the A5-rated liner provides protection from blades, slicers, deboning knives, and processing equipment where cut injuries are common. The lime color provides clear visual contrast for fragment detection in food production environments. Suitable for meat processing, fish handling, deli operations, and produce cutting applications.

Key Features

ANSI A5 Cut Resistance — High-level cut protection appropriate for food processing blades, boning knives, slicers, and sharp processing equipment.
Food Grade Construction — Materials and construction meet food-safe requirements for direct contact with food products in processing and handling environments.
Lime Color — High-contrast color assists with fragment detection in food production facilities where contamination detection is a food safety requirement.
Lightweight Shell — Maintains dexterity for knife work, product handling, and precision food preparation tasks.

Compliance

Meets ANSI/ISEA 105 A5 cut resistance and food-grade requirements. Designed for meat packing, fish processing, deli operations, produce handling, and food manufacturing environments requiring cut-resistant, food-safe gloves.