Is the Sellstrom 35000 Replacement Window for 390 Series the right replacement window for keeping a 390 Series face shield in service?

Short answer: If you already own a Sellstrom 390 Series crown and the original lens is scratched or hazed, the Sellstrom 35000 is the correct clear polycarbonate window to snap back in — it restores impact protection without buying a whole new assembly. It is a lens only (no headgear), and it is brand- and series-specific, so confirm you have a 390 Series crown before ordering; if you do not, see our how to choose a face shield guide or browse complete face shields instead. Remember a face shield is secondary protection — keep your safety goggles or glasses on underneath per the logic in safety glasses vs face shields.

Sellstrom 35000 Replacement Window for 390 Series Review (2026)

This is a replacement part, not a complete face shield. The Sellstrom 35000 is a clear, injection-molded polycarbonate window cut and pre-formed to fit the Sellstrom 390 Series headgear, so it only makes sense if you already own that crown. Polycarbonate is the impact-resistance workhorse of face shield lens materials — it outperforms acetate and propionate in ANSI Z87.1 high-impact testing — which makes a clear 35000 window the right pick for chipping, grinding, machining and general flying-debris work rather than for chemical immersion or for radiant heat. Note the manufacturer copy on this listing mixes in generic "welding" boilerplate, but the part itself is a clear window with no shade number stated; if you need torch, plasma or arc protection you want a shaded IR window such as the FIBRE-METAL 4178IRUV3 or a complete welding shield from our best face shields for welding, grinding and cutting guide — never a clear lens. Like any shield, it is worn over primary eyewear, so pair it with safety goggles and read ANSI Z87.1 explained to understand what the marking covers.

Editorial verdict — 4.1/5
For a 390 Series owner, the 35000 is a low-cost way to bring a scratched shield back to full optical clarity and impact protection — far cheaper than a new crown — provided you confirm the series match and accept that it is a clear impact window, not a welding or chemical-immersion lens.VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are accurate as of the date shown and are subject to change. Full affiliate disclosure.

Who it is for

• 390 Series owners whose original window is scratched, hazed or cracked and who want to restore the shield rather than replace the whole unit
• Grinders, chippers and machinists who need a clear impact window over safety goggles for flying-debris work
• Maintenance and fabrication crews standardized on Sellstrom 390 Series crowns who buy lenses as a consumable
• Facilities buyers stocking replacement windows alongside complete face shields to keep PPE compliant
• Anyone NOT on a 390 Series crown — they should instead pick a complete shield via how to choose a face shield
• Welders and torch cutters — who should skip this clear lens and use a shaded IR option from the best face shields for welding, grinding and cutting guide

What the Sellstrom 35000 390-Series Window does well

Correct series fit

Pre-formed to the 390 Series crown curve, the Sellstrom 35000 seats cleanly without the gaps a cross-brand window leaves. For other Sellstrom systems you would instead want the Sellstrom 32100 DP4 window or the 37701 for the 301 Series.

Impact-grade material

Injection-molded polycarbonate is the highest-impact lens material in ANSI Z87.1 testing, beating acetate and propionate, which is why clear PC windows like this and the 3M 82600 dominate grinding and chipping work. See what does Z87+ mean.

Repair instead of replace

Swapping the window keeps the crown and suspension you already own, a fraction of the cost of a new complete shield from face shields. The same economics make the ERB 15151 and Honeywell A8150/40 windows popular consumables.

Optical clarity restored

A fresh clear window removes the scratch glare and haze that quietly turn a worn shield into a visibility hazard — important when you are layering it over safety goggles and need a clean sightline, as covered in safety glasses vs face shields.

Where the Sellstrom 35000 390-Series Window falls short

Lens only — no headgear

There is no crown or ratchet in the box, so a buyer without a 390 Series headgear gets nothing usable. If you need a full setup, start from a complete unit in best face shields rather than a bare window.

Tight compatibility window

It fits the Sellstrom 390 Series and nothing else — not a Jackson 30706, a Fibre-Metal 4178CL or an MSA V-Gard visor. Confirm your series before ordering.

Clear, not shaded

Despite generic 'welding' wording in the listing, this is a clear impact window with no shade number, so it must not be used for arc, torch or plasma. For radiant heat use a shaded IR window like the Honeywell 4178IRUV5 instead.

Sellstrom 35000 390-Series Window vs the competition

Compare prices on Amazon →Sellstrom 35000 390-Series Window on AmazonSellstrom 32100 (DP4)

When to step up from the Sellstrom 35000 390-Series Window

If you find yourself replacing windows often or want a heavier-duty setup, the step up is a complete assembly rather than another bare lens. A full crown-plus-window unit like the Sellstrom S39000 single-crown shield or the comfort-focused Honeywell Uvex Bionic (see our Uvex Bionic review) gives you a fresh suspension and ratchet at the same time. For hard-hat crews, a slot-mount system such as the Fibre-Metal F5500 integrates with hard hats; compare options in best face shields.

Category context

Face shields fall into three buckets, and matching the part to the hazard matters. Clear polycarbonate windows like the 35000 are for impact — grinding, chipping, machining — and are the most common type, alongside the 3M 82600 and Delta Plus WELFS15P. For chemical splash you want PETG or propionate, such as the MCR Safety 181640 PETG or MSA chemical-splash V-Gard. Heat and brush/forestry call for steel mesh like the MSA V-Gard steel mesh, while welding and torch cutting require a shade-rated IR window such as the FIBRE-METAL 4178IRUV3. The other axis is complete shield versus replacement window: the 35000 is the latter, so it depends on you already owning a 390 Series crown — mount style (ratchet crown, hard-hat slot adapter, speedy-loop) is fixed by the headgear, not the lens. Whatever you choose, it is secondary protection worn over safety goggles, per ANSI Z87.1 explained and OSHA's eye and face rule.

Total cost of ownership

Windows are consumables, so plan on a replacement cadence rather than a one-time buy. In abrasive environments a clear polycarbonate lens hazes and scratches within weeks to a few months; in lighter-duty work it can last a year or more. Because the 35000 reuses your existing 390 Series crown — which lasts years if the ratchet and suspension are intact — the running cost is just the window itself, which is why buying lenses in small lots beats replacing whole shields. Stock a spare or two alongside complete face shields, and if your crown is also worn, price a full assembly instead; for fleet-wide planning, compare per-use cost in best face shields. Owners of other Sellstrom systems should keep the matching lens on hand too — the 32100 for DP4 or the 37701 for the 301 Series.

Final verdict

Buy the Sellstrom 35000 if — and only if — you own a Sellstrom 390 Series crown and need to restore a clear, impact-rated window for grinding, chipping or general debris work; it is the correct, economical OEM-fit lens for that job. If you do not have that headgear, choose a complete shield using how to choose a face shield or browse face shields. For chemical immersion pick a PETG window like the MCR Safety 181640, and for welding or torch work use a shade-rated IR shield from best face shields for welding, grinding and cutting — never this clear lens. Whatever you run, keep your safety goggles on underneath.

VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

Sellstrom 35000 390-Series Window FAQ

What headgear does the Sellstrom 35000 window fit?

It is made specifically for the Sellstrom 390 Series face shield crown. It is pre-formed to that frame, so it will not seat correctly on other Sellstrom systems or on other brands. If you are unsure of your series, confirm the crown model before ordering or start fresh with a complete unit from face shields.

Is the 35000 a complete face shield or just the window?

Just the window. There is no crown, ratchet or suspension included, so it only makes sense if you already own a 390 Series headgear. If you need a full setup, see the complete shields in best face shields instead of a bare lens.

Can I use the Sellstrom 35000 for welding or torch cutting?

No. It is a clear polycarbonate window with no shade number, so it offers no protection from welding arc or torch radiant heat despite some generic 'welding' wording in the listing copy. For those hazards use a shade-rated IR window such as the FIBRE-METAL 4178IRUV3 or a complete shield from best face shields for welding, grinding and cutting.

Will the 35000 fit a Jackson, Fibre-Metal, MSA or 3M crown?

No — compatibility is system-specific. A 390 Series window will not fit a Jackson 30706, Fibre-Metal 4178CL or MSA V-Gard frame. Match the window to the brand and series of the crown you already own.

What hazards is a clear polycarbonate window best for?

Impact: grinding, chipping, machining, and general flying-debris work. Polycarbonate is the top impact material in ANSI Z87.1 testing, which is why clear PC windows are the default for those tasks. For chemical immersion or heat you want a different material — see the lens-material breakdown in how to choose a face shield.

Does a face shield replace my safety glasses?

No. A face shield is secondary protection worn over primary eyewear, per OSHA 29 CFR 1910.133 and ANSI/ISEA Z87.1. Keep your safety goggles or safety glasses on underneath at all times — the reasoning is laid out in safety glasses vs face shields.

How often should I replace the window?

Treat it as a consumable. In abrasive work a clear polycarbonate lens hazes and scratches within weeks to a few months; in lighter duty it can last a year or more. Replace it as soon as scratches or haze cut visibility, and keep a spare on hand alongside your face shields.

Is the Sellstrom 35000 ANSI Z87.1 compliant?

The listing states the window is ANSI Z87.1-compliant for impact and particle hazards. Always verify the Z87 marking on the part itself when it arrives. For what the marking and the plus symbol mean, see what does Z87+ mean and ANSI Z87.1 explained.

Sellstrom 35000 vs the 3M 82600 — which window is better?

Both are clear polycarbonate impact windows; the difference is fit. The 35000 fits the Sellstrom 390 Series, while the 3M 82600 is cut for 3M headgear. Buy the one that matches your crown — they are not cross-compatible.

Sellstrom 35000 vs Fibre-Metal 4178CL?

The Fibre-Metal 4178CL is a propionate window pre-formed for Fibre-Metal dual-crown shields, with thickness options for extra margin. The 35000 is polycarbonate for the Sellstrom 390 Series. Polycarbonate edges propionate on raw impact; propionate has better chemical resistance — but again, fit decides the purchase.

Can polycarbonate handle chemical splash?

Only light splash. Polycarbonate resists impact superbly but is weaker against strong solvents and high heat than PETG or propionate. For chemical immersion choose a PETG window like the MCR Safety 181640 or a chemical-splash visor such as the MSA 10115856 V-Gard.

Will the window fog up?

It can. This is an uncoated clear window, so in humid or temperature-changing work it may fog. If fogging is a constant problem, consider an anti-fog complete shield such as the Jackson Safety 14201 MAXVIEW or a goggle-shield combo from face shields.

What if I own a Sellstrom DP4 or 301 Series instead of the 390?

Use the matching window. For a DP4 shield use the Sellstrom 32100; for the 301 Series use the Sellstrom 37701. The 35000 is only for the 390 Series.

Do I need a hard hat with this shield?

Not because of the window. Mounting style is set by your 390 Series crown, which may be a standalone suspension or a hard-hat slot adapter. If you work where overhead hazards require head protection, pair the system with hard hats and confirm your crown supports a slot adapter.

Is replacing the window cheaper than buying a new face shield?

Usually, yes — significantly. Reusing your existing crown and suspension means you only pay for the lens. If the crown's ratchet or suspension is also worn, though, price a complete assembly; compare running costs in best face shields.

Can I install the 35000 myself?

Yes. Replacement windows for systems like this are designed for tool-free swaps onto the matching crown. Pop the old lens off and seat the new one per the headgear's window-change instructions. If it does not snap in cleanly, you likely have the wrong series — recheck against how to choose a face shield.

Does this window protect against arc flash?

No. Arc-flash protection requires a rated dual-crown shield such as the Sellstrom 31200 arc-flash dual-crown, not a clear impact window. Never substitute a standard polycarbonate lens for arc-rated equipment.