Delta Plus WELFS15P Polycarbonate Flat Face Shield

delta plus welfs15p polycarbonate flat face shield — what the listing actually specifies

Delta Plus WELFS15P WELFS15P Fs-15P Polycarbonate Flat Face Shiel Face Shield Review

Impact protection and splash protection are different tests. ANSI Z87.1 rates spectacles for impact, but only a device marked for splash (D3) is evaluated against a chemical splash hazard; safety glasses with open sides do not qualify, and a face shield is a secondary protector worn over primary eye protection rather than instead of it.

The Delta Plus WELFS15P is an ANSI Z87.1-compliant safety face shield designed for general manufacturing, maintenance, and industrial operations. Constructed from impact-resistant polycarbonate, it provides full-face coverage from brow to below the chin — protecting the face, cheeks, and jaw from hazards that safety glasses and goggles cannot address alone. The FS-15P Clear FLAT Polycarbonate Face Shield with Universal hole pattern..

Read the full Delta Plus WELFS15P Polycarbonate Flat Face Shield review →

Construction and Materials

The lens window is constructed from injection-molded polycarbonate, providing high impact resistance that exceeds acetate in ANSI Z87.1 high-impact testing, with strong resistance to UV-induced surface crazing. Dimensions: 8” x 15.5” x.04” Thickness:.07 inches Material: FLAT Polycarbonate. The lens window extends coverage across the full frontal face profile with side geometry providing lateral protection. Construction meets or exceeds ANSI Z87.1 high-velocity impact requirements.

Compliance and Ratings

Rated to ANSI Z87.1 and OSHA 1910.133 for impact and particle hazard environments. ANSI/ISEA Z87.1 governs occupational eye and face protective devices; OSHA 29 CFR 1910.133 mandates its use in workplaces with documented eye and face hazards. Face shields should be used as part of a layered protection strategy per the OSHA PPE hierarchy. UV Protection: 99.9% Heat Tolerance: up to 265 degrees Color: Clear.

Performance

In manufacturing and maintenance environments, face shield use is indicated wherever projectile, splash, or particle hazards exist beyond what safety glasses alone addresses. Standard: ANSI Z87.1-2003. ANSI standard requires users to wear safety glasses under face shields.. Maintaining lens cleanliness and replacing lenses when scratched preserves visibility quality for precision work.

Strengths

• Polycarbonate lens provides ANSI Z87.1-rated impact protection for safety applications
• Optical-grade lens maintains clarity without distortion at working distances
• Compatible with standard face shield headgear assemblies
• Adjustable headgear fits most adult head sizes
• Full-face coverage from brow to chin protects areas beyond eyewear reach
• Full-face coverage from brow to chin provides protection not achievable with safety glasses alone

Limitations

• Face shields do not seal the eye surround — safety glasses or safety goggles must be worn underneath in chemical splash and grinding environments per OSHA 1910.133
• Lens scratching from abrasive contact degrades clarity over time; replacement lenses should be sourced when transmission quality decreases
• One-size-fits-most headgear may not accommodate all head sizes or hard hat platforms; verify compatibility before crew-scale procurement

Recommended Use Cases

Manufacturing assembly; maintenance and repair; construction; food service (splash); healthcare (droplet barrier); general workplaces with documented projectile or splash hazards. Appropriate for any OSHA-regulated workplace where face and eye hazard assessments document a risk requiring face shield-level protection.

Verdict

The Delta Plus WELFS15P face shield delivers ANSI Z87.1-compliant protection for safety applications in a polycarbonate construction suited for industrial environments. Buyers should verify headgear compatibility and application requirements before crew-scale procurement. For the full range of face shields across brands and protection levels, or for paired eye protection — safety glasses and safety goggles — explore the WC Safety protective equipment range.

What separates the models in this category is set out in amber vs clear lens safety glasses, anti fog safety glasses guide, anti fog vs anti scratch safety glasses, best face shields, best face shields for welding grinding and cutting.

Directly comparable options are grouped in 3m safety glasses, 3m virtua safety glasses, anti fog safety glasses.

Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.