Is the Sellstrom 32010 DP4 Lightweight Face Shield the right face shield for grinding, brazing and cutting work?

Short answer: For sparks, slag and flying debris from grinding, brazing and cutting, yes — the Sellstrom 32010 DP4 is a complete, ANSI Z87.1 clear-polycarbonate shield with its own ratchet crown, so you are not buying headgear separately. Just remember a face shield is secondary protection worn over safety glasses, per our safety glasses vs face shields guide. If you actually need shade for arc welding or plasma, skip this clear window and look at a shaded option like the Sellstrom 32152 plasma/flame cutting shield or our welding/grinding/cutting face shield guide.

Sellstrom 32010 DP4 Lightweight Face Shield Review (2026)

The Sellstrom 32010 DP4 sits in the "complete clear shield" tier of the face shields catalog: it ships as a full assembly — a clear injection-molded polycarbonate window mounted on a lightweight high crown with a ratchet adjustment — rather than as a bare replacement window you bolt onto existing headgear. Sellstrom positions the DP4 for construction, manufacturing, oil and gas, and metal work, and specifically for grinding, brazing and cutting, where the hazard is high-velocity sparks, slag and chips rather than radiant arc light. Because the window is clear polycarbonate with no shade number, treat it as impact and spark protection, not a welding lens — pair it with shaded eyewear or a helmet if an arc is involved, and always wear primary safety glasses underneath as our ANSI Z87.1 explained and how to choose a face shield references describe.

Editorial verdict — 4.3/5
For the money, the 32010 DP4 is a sensible complete-shield buy: you get a lightweight high crown, a ratchet adjustment and a clear impact window in one package, with cheap DP4 replacement windows keeping it in service for years — just don't expect any welding shade.VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are accurate as of the date shown and are subject to change. Full affiliate disclosure.

Who it is for

• Grinders and metal fabricators who need a clear impact shield over safety glasses for sparks and chips
• Brazing and torch-cutting techs who want spark and slag coverage but understand this clear window has no shade — see the welding/grinding/cutting guide
• Construction, oil and gas and maintenance crews wanting one complete, lightweight shield rather than sourcing a crown and window separately
• Shops already standardized on the Sellstrom DP4 system who want spare complete units alongside replacement windows
• Buyers comparing complete clear shields who are also weighing the Honeywell Uvex Bionic or Jackson Safety MAXVIEW

What the Sellstrom 32010 DP4 does well

Complete out-of-the-box assembly

Unlike a bare DP4 replacement window, the 32010 includes the high crown and ratchet headgear, so it deploys standalone with nothing else to buy. That makes it a cleaner first purchase than piecing together a crown plus window.

Impact-grade clear window

The injection-molded polycarbonate window is the impact workhorse of the face shields range, rated superior to acetate or propionate in ANSI Z87.1 high-impact testing. For grinding sparks, brazing spatter and flying chips that is exactly the right material, as our how to choose a face shield reference explains.

Lightweight high-crown comfort

Sellstrom builds the DP4 as a lightweight mask with a high face shield and extended top-of-head coverage, which keeps neck fatigue down on long grinding or metal-work shifts. The tool-free ratchet crown dials fit across adult head sizes without taking the shield off.

Cheap, deep parts ecosystem

The DP4 line is well supported: you can refresh it with a replacement window, swap the crown and ratchet, or add a flip-front visor. That keeps long-run cost low compared with discarding a whole unit.

Correct secondary-protection design

It is built to wear over primary safety glasses, which is exactly how OSHA 1910.133 and ANSI Z87.1 intend a shield to be used. Our safety glasses vs face shields guide spells out why the shield never replaces the glasses underneath.

Where the Sellstrom 32010 DP4 falls short

No shade — not a welding lens

Despite the catalog tagging it a welding shield, the 32010 window is clear with no shade number, so it does nothing against arc radiant light. For actual arc work pick a shaded unit such as the Sellstrom 32152 plasma/flame shield or an IR window like the Fibre-Metal 4178IRUV3.

No arc-flash rating

There is no electrical arc-flash rating in the listing, so it should not be specified for electrical work. An arc-flash task calls for a dual-crown unit like the Sellstrom 31200 arc-flash dual-crown shield.

Wrong window for chemical splash

Polycarbonate is an impact material, not the best chemical-splash barrier; for splash-dominant lab and chemical handling a PETG or propionate window such as the MCR Safety 181640 PETG shield is a better fit.

Fogging and window wear

No anti-fog or hard-coat is documented, so heat and sweat can fog it, and sparks will eventually pit the window — budget for DP4 replacement windows as a wear item.

Sellstrom 32010 DP4 vs the competition

Compare prices on Amazon →Sellstrom 32010 DP4 on AmazonHoneywell Uvex Bionic

When to step up from the Sellstrom 32010 DP4

If your hazard goes beyond clear-impact, step up within the same family: the Sellstrom 32152 plasma/flame cutting shield adds a shaded window for cutting glare, while the Sellstrom 31200 arc-flash dual-crown shield is the right move for electrical and arc-flash exposure. For a roomier clear window with a premium ratchet, the Jackson Safety 14201 MAXVIEW and Honeywell Uvex Bionic are the obvious cross-shops — our best face shields guide lines them up side by side.

Category context

Match the window to the hazard, not the marketing label. Clear polycarbonate like the 32010's is the impact and spark material for grinding, brazing and cutting; PETG or propionate handles chemical splash better (see the MCR Safety 181640 PETG shield); steel mesh suits heat and brush work; and only an IR shade number or arc-flash dual crown belongs near welding or electrical arcs. It also matters whether you are buying a complete shield, a replacement window, or just headgear: the 32010 is the complete clear unit, so it is the right first buy, while the windows and crown are restocks for it. Mount style here is a ratchet high crown for standalone wear; if you live in a hard hat, look instead at slot-adapter or hard-hat-mounted shields. Whatever you pick, it is secondary protection over safety glasses — never a standalone primary, as what does Z87 plus mean lays out.

Total cost of ownership

Total cost of ownership on the DP4 is favorable because the crown is durable and the consumable is the window. The clear polycarbonate window is the part that pits, hazes and scratches from sparks and slag, so plan to swap it on a cadence set by how aggressive your grinding is — light intermittent use may go many months, heavy daily spark exposure far less. Keeping a few DP4 replacement windows on the shelf is cheaper than buying whole assemblies, and if the ratchet ever wears out you can replace just the crown and headgear rather than the unit. That repairable design is the main reason a complete DP4 beats a disposable shield over time.

Final verdict

Buy the Sellstrom 32010 DP4 if your real-world hazard is sparks, slag and flying debris from grinding, brazing and cutting and you want one complete, lightweight, ANSI Z87.1 clear shield over your safety glasses. Do not buy it for arc welding or electrical work — choose a shaded unit like the Sellstrom 32152 or the arc-flash Sellstrom 31200 instead. Cross-shop the Honeywell Uvex Bionic and Jackson Safety MAXVIEW for a bigger clear window, and use the best face shields guide to confirm the fit.

VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

Sellstrom 32010 DP4 FAQ

Is the Sellstrom 32010 DP4 a welding face shield?

Not in the shaded sense. Its window is clear polycarbonate with no shade number, so it protects against grinding sparks, brazing spatter and cutting chips but does nothing for arc radiant light. For true welding or plasma you need a shaded window such as the Sellstrom 32152 or an IR window like the Fibre-Metal 4178IRUV3, as covered in our welding/grinding/cutting guide.

Does the 32010 come with headgear or is it just the window?

It is a complete assembly — the clear polycarbonate window plus the high crown and ratchet headgear ship together, so it deploys standalone. If you only need the lens, buy the DP4 replacement window; if you only need the crown, buy the replacement crown and ratchet.

Can I wear the 32010 DP4 without safety glasses?

No. A face shield is secondary protection under OSHA 1910.133 and ANSI Z87.1 and must be worn over primary safety glasses or goggles. Our safety glasses vs face shields guide explains why the shield never replaces the eyewear underneath.

What window material is the 32010 and why does it matter?

It is injection-molded polycarbonate, rated superior to acetate or propionate in ANSI Z87.1 high-impact testing. That makes it ideal for impact and spark hazards but a weaker choice where chemical splash dominates, where PETG or propionate like the MCR Safety 181640 PETG shield is better. See how to choose a face shield for the material map.

Is the Sellstrom 32010 ANSI Z87.1 compliant?

Yes, the listing states it is ANSI Z87.1 compliant for impact and particle hazards and intended under OSHA 1910.133. We do not publish a specific Z87 marking line beyond that, so verify the exact markings on the part you receive. Our ANSI Z87.1 explained and what does Z87 plus mean references cover what the marks mean.

Does the 32010 have an arc-flash rating?

No arc-flash rating is stated for it, so do not specify it for electrical or arc-flash work. For those tasks choose a dual-crown arc-flash unit such as the Sellstrom 31200 or Sellstrom 31202.

Which replacement windows fit the 32010 DP4?

It takes DP4-series windows — the Sellstrom 32100 replacement window for DP4 and the equivalent 32100 replacement face shield for DP4. Compatibility is system-specific, so do not fit a Jackson or Fibre-Metal window to a Sellstrom DP4 crown.

Can I replace just the crown if the ratchet wears out?

Yes. The Sellstrom 32000 replacement crown and ratchet headgear for DP lets you renew the suspension without buying a whole new shield, which is the main reason the DP4 holds up well on total cost of ownership.

How does the 32010 compare to the Honeywell Uvex Bionic?

Both are complete clear polycarbonate shields with ratchet crowns. The Honeywell Uvex Bionic is known for a built-in chin guard and extended coverage, while the DP4 leans on a lightweight high crown and a cheap parts ecosystem. See the best face shields guide for a head-to-head.

How does it compare to the Jackson Safety MAXVIEW 14201?

The Jackson Safety 14201 MAXVIEW offers an oversized window for a wider field of view, where the DP4 is a more compact lightweight unit. Both are clear, no-shade impact shields, so the choice comes down to coverage versus weight and your existing parts standard.

What's the difference between the 32010, 32151 and S32210?

All three are DP4 lightweight clear shields in the same family; the Sellstrom 32151 and Sellstrom S32210 are sibling SKUs with minor configuration or packaging differences. Match by exact part number and confirm the window and crown you need; they share the DP4 parts ecosystem.

Will the 32010 mount on a hard hat?

It is built as a standalone high crown for ratchet wear, not described as a hard-hat slot mount. If you work in a hard hat all day, look at a slot-adapter or hard-hat-mounted shield instead, such as the Fibre-Metal F5500 hard hat faceshield.

Is polycarbonate or PETG better for my job?

Polycarbonate wins on impact and sparks, which is the DP4's lane; PETG and propionate resist chemical splash better. If your main hazard is liquids and chemicals rather than impact, the MCR Safety 181640 PETG shield or a propionate visor is the safer call — see how to choose a face shield.

Does the 32010 fog up?

The listing does not document an anti-fog coating, so in hot or high-exertion work fogging is a realistic complaint. Wearing it over vented safety goggles and choosing an anti-fog primary lens helps; if fogging is constant, consider a shield that explicitly lists anti-fog.

How often will I need to replace the window?

It depends on spark and slag exposure. The clear polycarbonate window pits and hazes over time, so heavy grinding may mean frequent swaps while light use lasts much longer. Keep DP4 replacement windows on hand and change the lens, not the whole shield.

Can I add a flip-front visor to the DP4?

The DP4 series supports a flip-front configuration; the Sellstrom 32188 replacement flip-front visor for DP4 and the Sellstrom 32155 flip-window shield are the relevant parts. Confirm your exact crown configuration before ordering, since flip-front fitment is system-specific.

Is the 32010 good for chemical handling or lab work?

It is not the first choice there. Its polycarbonate window favors impact over splash, so for chemical handling a splash-oriented visor is better — for example the Jackson Safety 14201 MAXVIEW splash configuration or an MSA V-Gard chemical splash visor. Browse the full face shields collection to match the splash hazard.