🔍 Click to zoom
Sellstrom 31202 Full Face Shield Mask with Hard Hat - Arc Fla Face Shield
$109.99
Final price set by Amazon · may vary
Sellstrom 31202 Full Face Shield Mask with Hard Hat - Arc Fla Face Shield Review The Sellstrom 31202 is an ANSI Z87.1-compliant arc-flash face shield and hard hat system — SureWerx/Jackson rate the 312 Series at 9.9 ...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
Sellstrom 31202 Full Face Shield Mask with Hard Hat - Arc Fla Face Shield Review
The Sellstrom 31202 is an ANSI Z87.1-compliant arc-flash face shield and hard hat system — SureWerx/Jackson rate the 312 Series at 9.9 cal/cm² to ASTM F2178 and NFPA 70E. "Arc" here means an electrical arc flash, not a welding arc: the unit carries no welding filter shade and must not be used for welding, torch cutting or plasma cutting. Constructed from impact-resistant polycarbonate, it provides full-face coverage from brow to below the chin — protecting the face, cheeks, and jaw from hazards that safety glasses and goggles cannot address alone. FACE SHIELD MASK - Sellstrom's protective face shield with hard hat protects the head and face from arc flash, impact, splashes and flying debris. No D3 splash marking and no filter shade are published for this unit, so do not select it on the strength of chemical-exposure or optical-radiation protection.
Construction and Materials
The lens window is constructed from injection-molded polycarbonate, providing high impact resistance that exceeds acetate in ANSI Z87.1 high-impact testing, with strong resistance to UV-induced surface crazing. The ratchet headgear mechanism enables tool-free size adjustment across adult head sizes. FULL PROTECTION - Large, high-impact 9.9 Ca/cm2 molded polycarbonate window curves naturally to fit facial contours; Great for construction, manufacturing, oil & gas, metal work when working on machinery, welding, cutting, grinding. The lens window extends coverage across the full frontal face profile with side geometry providing lateral protection. Construction meets or exceeds ANSI Z87.1 high-velocity impact requirements.
Compliance and Ratings
Rated to ANSI Z87.1 and OSHA 1910.133 for eye and face protection in welding and thermal cutting operations. ANSI/ISEA Z87.1 governs occupational eye and face protective devices; OSHA 29 CFR 1910.133 mandates its use in workplaces with documented eye and face hazards. Additional ANSI Z49.1 compliance is required for welding; the lens shade must match the welding process and amperage per that standard. INCLUDES - Crown and chin guard, Sellstrom Hard Hat w/ 6-Point Suspension Ratchet (S69500), universal slotted adapter.
Performance
In welding environments, the shield protects against optical radiation, spatter, and slag. Confirm the shade number matches ANSI Z49.1 requirements for the specific welding process and amperage in use. TRUE COLOR OPTICS - Light green tint for 55% light transmittance. Maintaining lens cleanliness and replacing lenses when scratched preserves visibility quality for precision work.
Strengths
- Polycarbonate lens provides ANSI Z87.1-rated impact protection for welding applications
- Optical-grade lens maintains clarity without distortion at working distances
- Compatible with standard face shield headgear assemblies
- Ratchet adjustment provides tool-free fit change across head sizes
- Full-face coverage from brow to chin protects areas beyond eyewear reach
- Full-face coverage from brow to chin provides protection not achievable with safety glasses alone
Limitations
- Face shields do not seal the eye surround — safety glasses or welding helmets must be worn underneath in chemical splash and grinding environments per OSHA 1910.133
- Lens scratching from abrasive contact degrades clarity over time; replacement lenses should be sourced when transmission quality decreases
- One-size-fits-most headgear may not accommodate all head sizes or hard hat platforms; verify compatibility before crew-scale procurement
Recommended Use Cases
MIG, TIG, stick, and flux-core welding; torch cutting and brazing; plasma cutting; foundry operations with molten metal splash. Appropriate for any OSHA-regulated workplace where face and eye hazard assessments document a risk requiring face shield-level protection.
Verdict
The Sellstrom 31202 face shield delivers ANSI Z87.1-compliant protection for welding applications in a polycarbonate construction suited for industrial environments. Buyers should verify headgear compatibility and application requirements before crew-scale procurement. For the full range of face shields across brands and protection levels, or for paired eye protection — safety glasses and welding helmets — explore the WC Safety protective equipment range.
What to check before you buy
- A face shield is secondary protection
- ANSI/ISEA Z87.1 treats face shields as secondary protectors. They are worn over primary eye protection - safety glasses or goggles - not instead of it.
- Marking tells you the rating
- Look for the Z87 marking, and Z87+ for high impact. Additional letters cover splash and droplet (D3), dust (D4) and fine dust (D5).
- Window material and coating
- Polycarbonate handles impact; acetate resists chemical splash better. Anti-fog coatings matter more than most buyers expect in humid or hot work.
- Headgear and crown adapters
- Shields mount to a ratchet headgear or to a hard hat via slot adapters. Adapter compatibility is not universal across hard hat brands.
How it compares to other face shields we review
| Product | List price |
|---|---|
| Sellstrom 31202 Full Face Shield Mask with Hard Hat - Arc Fla Face Shield (this page) | $109.99 |
| 3M 078371827837 H8A Ratchet Headgear and Visor Combination wi Face Shield | $48.69 |
| 3M WCP96 Clear Polycarbonate Faceshield Window — Z87.1 | $27.21 |
| 3M 8270 Deluxe Face Shield — Headgear + Visor, Z87.1 | $13.99 |
| 3M 6885 Faceshield Window — Clear Replacement Visor, Z87.1 | $20.85 |
| $48.69 | |
| 3M WP96C Polycarbonate Faceshield Window — Chemical, Z87.1 | $21.65 |
List prices recorded when this page was last updated; Amazon pricing moves frequently, so check the live listing. Browse the full face shields range.
Frequently asked questions
Can a face shield replace safety glasses?
No. Under ANSI/ISEA Z87.1 a face shield is secondary protection and must be worn over primary eye protection. On its own it leaves the eyes exposed to particles coming from beneath or the sides.
What does the Z87+ marking mean?
Z87 indicates the product meets the standard for basic impact; the plus sign indicates it meets the high-impact requirements. The marking appears on the shield and the frame or headgear.
Which window for chemical splash?
Look for the D3 splash marking. Acetate windows generally resist chemical attack better than polycarbonate, while polycarbonate is the stronger choice against impact.
Can I mount a shield on my hard hat?
Usually yes, using slot adapters - but adapters are specific to the hard hat suspension and brand. Check compatibility rather than assuming a universal fit.
How do I stop a face shield fogging?
Choose an anti-fog coated window, allow airflow behind the shield, and avoid sealing the gap at the chin. Coatings wear, so fogging that returns is often a sign the shield needs replacing.
Where do the specifications on this page come from?
They are taken from the manufacturer's published listing. WC Safety does not laboratory-test products, and nothing is claimed here that the manufacturer does not state.
Does WC Safety sell this product?
No. WC Safety is an independent review site and an Amazon Associate. Purchases happen on Amazon, and we earn a commission on qualifying purchases at no extra cost to you.
Researching this model? Read our detailed Sellstrom 31202 Full Face Shield Mask review.
Brand / Vendor
Sellstrom
Model / SKU
31202
Product Type
Face Shields
Price
$109.99 (Amazon)
Rating
4.3 / 5 — 89 Amazon ratings
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
★★★★☆4.3 / 5· 89 ratings on Amazon
★★★★★
Fair Deal
Fair Price for a Standard Quality Product.
Verified Purchaser · March 29, · ✓ Amazon Verified Purchase
★★★★★
Fits all if you read the instructions.
Great product. Has so many adjustment points i got this thing to fit me and my 3 year olds head. The replacement window is almost expensive as a whole hard hat replacement.
Verified Purchaser · May 10, 20 · ✓ Amazon Verified Purchase
★☆☆☆☆
Pure Junk!
Save your money and buy something better. This thing is a piece of junk. The faceshield doesn't even stay on.
Verified Purchaser · November 1 · ✓ Amazon Verified Purchase
★★★★★
Solid product
Great for general purpose safety. I’ve used it for grinding and cutting metal and removing tile. Can accommodate a respirator underneath.
Verified Purchaser · June 22, 2 · ✓ Amazon Verified Purchase
★★★★☆
Hope not to ever test it
I've only used it a few times, but compared to my old, inherited flash shield, this is great : I can now actually see inside a "hot" cabinet. Downside, of course, is that there's no way to add a headlamp, and it does make things look different (photos). It appears I cannot tighten the hinge knobs on the side enough to keep the shield from slowly sliding down over my face (afraid I'll strip the plastic threads); I have to push it back up every 30 seconds or so. It's as comfortable as one of these things can be, and the adjusting straps have held up so far. The tightening knob on the back is the incremental "clicking" type, but small enough steps to work ok. The sweat band is not thick, but sufficient; it might help to add some material.Probably if I had to use one every day I'd buy something a bit more robust, maybe with a light? But for occasional use, this is inexpensive ($86) and functional. I hope.
Verified Purchaser · March 15, · ✓ Amazon Verified Purchase
★★★★★
Better than ORANGE!
Looks better than orange. Let’s face it. Unless you REALLY like orange. Dude i really hope the hope the guy in the crane sees me as my dark arc flash protects me! Look cool going out!!!:)
Verified Purchaser · February 2 · ✓ Amazon Verified Purchase
★★★★★
GREAT SAFETY SHIELD
I liked the construction of the helmet.
Verified Purchaser · February 1 · ✓ Amazon Verified Purchase
★★★★☆
Great Visibility
This face shield has a great design. The adjustable hard hat band, doesn't adjust to a smaller size head. Also the side adjustments for securing the shield in place, doesn't last and remains loose.
Verified Purchaser · July 2, 20 · ✓ Amazon Verified Purchase
Showing 8 of 89 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
Is the Sellstrom 31202 face shield ANSI Z87.1 certified?
The Sellstrom 31202 face shield is rated to ANSI/ISEA Z87.1, the U.S. standard for occupational eye and face protective devices. OSHA 29 CFR 1910.133 requires ANSI Z87.1-compliant face protection in workplaces with documented eye and face hazards.
Can the Sellstrom 31202 be worn without safety glasses?
Face shields are not standalone eye protection for all hazard types. In chemical splash environments, OSHA 1910.133 requires safety glasses or goggles underneath. For grinding, safety glasses provide the direct eye seal. For broader-coverage impact scenarios, the face shield alone may be adequate — confirm with your site hazard assessment.
What is the difference between polycarbonate and acetate face shield lenses?
Polycarbonate provides higher impact resistance than acetate, making it preferred for flying-particle environments. Acetate is lighter and suited for chemical splash and lower-velocity particle hazards. Specify polycarbonate for industrial grinding, metalworking, and high-energy debris applications.
Does this face shield fit over a hard hat?
Many face shield headgear assemblies are designed to mount over Type 1 or Type 2 hard hats via accessory slots. Verify compatibility between the headgear model and your hard hat before purchasing. Some headgear types use standalone brow guards incompatible with hard hat attachment.
What shade lens is required for welding with this face shield?
Welding shade requirements follow ANSI Z49.1. MIG requires shade 10–13 depending on amperage; TIG requires shade 8–13; torch brazing requires shade 3–4; cutting operations require shade 3–6. Always match the shade number to the specific welding process and amperage to protect against UV and IR radiation.
What eye protection is needed under a chemical face shield?
OSHA 1910.133 requires indirect-vent or non-vented chemical splash goggles underneath a face shield in liquid chemical environments. Safety glasses alone do not provide adequate peripheral sealing for chemical splash. Always confirm the required eye protection level with your site SDS and hazard assessment.
How should a face shield lens be replaced?
Replace the lens when scratched, cracked, or chemically degraded. Most lenses attach via clips or frame channels and can be removed without tools. Replacement lenses must match the original headgear frame — lenses are not universally interchangeable. Inspect the headgear suspension for wear when replacing.
How do I clean a polycarbonate face shield lens?
Clean with mild soap and water or a lens-safe spray with a soft, lint-free cloth. Avoid paper towels, abrasive materials, ammonia-based glass cleaners, and solvents — these damage polycarbonate and anti-fog coatings. Rinse thoroughly and air-dry or gently blot.