Is the Sellstrom 32000 Replacement Crown and Ratchet Headgear the right headgear for your worn-out Sellstrom DP face shield?

Short answer: If you already own a Sellstrom DP-series face shield and the crown or ratchet has cracked, loosened, or worn out, the Sellstrom 32000 is the correct replacement headgear to bring it back to service — pair it with a compatible DP window such as the Sellstrom 32100 Replacement Window for DP4 and you have a working shield again. It is a system-specific spare, not a complete shield, so if you need a ready-to-wear unit instead, look at the Sellstrom 32010 DP4 Lightweight Face Shield or browse the full face shields range.

Sellstrom 32000 Replacement Crown and Ratchet Headgear Review (2026)

The Sellstrom 32000 is not a face shield you wear — it is the replacement crown and ratchet headgear that the Sellstrom DP face shield family clamps onto. In a face-shield assembly, the headgear does the unglamorous work: it carries the window, sets the standoff distance from your face, and holds everything stable while you work. Because a face shield is secondary protection worn over primary eyewear under OSHA 29 CFR 1910.133 and ANSI/ISEA Z87.1, the crown and suspension have to keep the window positioned correctly for that coverage to mean anything. This part exists for owners of the Sellstrom DP system — the Sellstrom 32010 DP4, Sellstrom 32151 DP4, and Sellstrom S32210 DP4 — whose ratchet or crown has worn out before the window did. It is brand- and series-specific: it is the DP crown, not a universal headgear, and it will not retrofit a Fibre-Metal, Jackson, or MSA system. If you are still deciding between a shield and safety glasses for your task, start with safety glasses vs face shields before buying any replacement parts.

Editorial verdict — 4.2/5
For a Sellstrom DP owner, the 32000 is a low-cost way to extend the life of a shield whose ratchet has failed — far cheaper than a whole new assembly. For anyone who does not already run the DP system, it is the wrong purchase: buy a complete shield instead.VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are accurate as of the date shown and are subject to change. Full affiliate disclosure.

Who it is for

• Owners of the Sellstrom 32010 DP4 Lightweight Face Shield whose ratchet has worn loose
• Crews running the Sellstrom 32151 DP4 or Sellstrom S32210 DP4 who keep spare parts on the shelf
• Safety managers standardizing on the Sellstrom DP platform across face shields who want repairable assemblies
• Plasma and flame-cutting users on the Sellstrom 32152 DP shield needing a fresh crown
• Maintenance buyers replacing a cracked suspension rather than a whole shield to control cost

What the Sellstrom 32000 DP Headgear does well

Brings a dead shield back to life

When the window is still good but the crown or ratchet has cracked, the 32000 restores the whole Sellstrom DP shield at a fraction of the cost of a new assembly. That is exactly what a replacement-part SKU should do.

Tool-free ratchet fit

The ratchet headgear mechanism enables tool-free size adjustment across adult head sizes, so the same crown sets up quickly for different wearers — useful for shared-shield areas. For more on fit basics, see how to choose a face shield.

Holds the window where it belongs

A face shield only works as secondary protection if the window sits at the right standoff and angle; a fresh crown keeps that geometry correct so the brow-to-chin coverage the DP window provides is not compromised by a sloppy suspension.

Pairs cleanly with DP windows

It is designed to mate with the Sellstrom DP window line, including the Sellstrom 32100 Replacement Window for DP4 and the Sellstrom 32188 Flip-Front Visor for DP4, so a crown plus a window rebuilds the assembly without guesswork.

Where the Sellstrom 32000 DP Headgear falls short

Useless without a window

On its own the 32000 protects nothing — it is a crown, not a shield. You must add a compatible DP window before the assembly offers any face protection, so budget for both if you are starting from scratch.

Locked to the Sellstrom DP system

This is a system-specific part. It will not fit a Fibre-Metal F300, a Jackson 370 Speed Dial, or an MSA V-Gard carrier — cross-brand mounting is never a safe assumption.

Still a wear item

Ratchet suspensions are consumable. Heavy daily use will eventually loosen this crown too, so high-volume shops should treat it as a recurring spare rather than a one-time fix.

Sellstrom 32000 DP Headgear vs the competition

Compare prices on Amazon →Sellstrom 32000 DP Headgear on AmazonJackson Safety 20695 3

When to step up from the Sellstrom 32000 DP Headgear

If your shield is far enough gone that both the crown and the window are tired, it is often smarter to step up to a complete replacement rather than rebuild piece by piece. The Sellstrom 32010 DP4 Lightweight Face Shield and Sellstrom S32210 DP4 ship as ready-to-wear assemblies, and for higher-hazard work the Sellstrom 31200 Arc-Flash Dual-Crown or Sellstrom 31202 Hard-Hat Arc-Flash shields move you into a more capable platform entirely. If you are open to switching ecosystems, the Honeywell Uvex Bionic is a popular complete shield worth comparing.

Category context

Face-shield catalogs mix three very different things, and it helps to know which you are buying. A complete shield bundles a window and headgear into a wear-ready unit; a replacement window is just the lens, like the Sellstrom 32100 DP4 window or a Jackson 30706 window; and headgear or crowns — what the 32000 is — are the suspension hardware the window mounts to. Window material drives hazard fit: polycarbonate for impact, PETG or propionate for chemical splash, steel mesh for heat and brush work, IR shade numbers for welding and torch cutting, and arc-flash dual-crown designs for electrical exposure. Mount style matters too — ratchet crowns like this one, cap and hard-hat slot adapters, and speedy-loop mounts such as the Fibre-Metal F5400 each serve different workflows. Because the shield is secondary protection, none of this replaces your primary safety glasses or goggles; see ANSI Z87.1 explained for the full hierarchy.

Total cost of ownership

Thinking in total cost of ownership is what makes a replacement crown worth it. DP windows are the fastest-wearing part — they scratch, haze, and get pitted, so they get swapped most often via parts like the Sellstrom 32100 and 32188 flip-front visor. The crown and ratchet last longer but eventually crack or loosen, which is where the 32000 comes in; replacing a few dollars of headgear is far cheaper than retiring an otherwise-serviceable DP shield. For a shop running the DP platform, the smart move is keeping both spare windows and a spare crown on the shelf so a damaged assembly never sidelines a worker; standardizing on one repairable system across your face shields keeps that spares list short.

Final verdict

Buy the Sellstrom 32000 if — and only if — you already own a Sellstrom DP-series face shield and its crown or ratchet has failed; in that case it is the correct, cost-effective fix, and pairing it with a Sellstrom 32100 DP4 window rebuilds a working shield. If you do not run the DP system, skip it and buy a complete unit such as the Sellstrom 32010 DP4 or shop the broader face shields and best face shields guide instead. For welding, grinding, and cutting work, the best face shields for welding, grinding and cutting guide will point you to the right shaded or impact-rated platform.

VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

Sellstrom 32000 DP Headgear FAQ

What exactly is the Sellstrom 32000?

It is a replacement crown and ratchet headgear for Sellstrom DP-series face shields — the suspension hardware a DP window mounts to, not a complete shield. You buy it to restore a DP shield whose crown or ratchet has worn out or cracked. On its own it provides no face protection.

Which face shields does the Sellstrom 32000 fit?

It is designed for the Sellstrom DP family, including the Sellstrom 32010 DP4, Sellstrom 32151 DP4, and Sellstrom S32210 DP4. It is brand- and series-specific, so confirm your shield is part of the Sellstrom DP system before ordering.

Will the 32000 fit a Fibre-Metal, Jackson, or MSA face shield?

No. Headgear is system-specific, so a Sellstrom DP crown will not mount a Fibre-Metal F300, a Jackson 370 Speed Dial, or an MSA V-Gard carrier. Cross-brand mounting is never a safe assumption — match the crown to its own ecosystem.

Does the Sellstrom 32000 come with a window?

No — it is the crown and ratchet headgear only, with no lens. To have a working shield you must add a compatible DP window such as the Sellstrom 32100 Replacement Window for DP4. Budget for both if you are rebuilding from scratch.

When should I replace the crown instead of the whole shield?

Replace the crown when the window is still serviceable but the ratchet has cracked, loosened, or stopped holding adjustment. If both the window and the crown are worn, it is usually cheaper to buy a complete Sellstrom 32010 DP4 instead. Weigh the part cost against a new assembly.

Is a face shield enough protection on its own?

No. Per OSHA 1910.133, a face shield is secondary protection and must be worn over primary safety glasses or goggles. The headgear's job is to hold the window correctly, but it does not change the requirement to wear primary eyewear; see safety glasses vs face shields.

How does the ratchet headgear adjust?

The ratchet mechanism enables tool-free size adjustment across adult head sizes — you turn the dial to tighten or loosen the suspension. That makes the same crown easy to set up for different wearers in shared-shield areas. For fit fundamentals, see how to choose a face shield.

Does replacing the crown affect ANSI Z87.1 compliance?

The shield's Z87.1 rating depends on using the manufacturer's intended components together. Using the correct Sellstrom DP crown with a genuine DP window keeps the assembly within its design; mixing brands can void that. Read what Z87+ means for the marking details.

How is this different from a replacement window?

A window like the Sellstrom 32100 is the lens that protects your face; the 32000 is the headgear the lens hangs on. Windows wear out fastest from scratches and hazing, while crowns fail less often but from cracking or ratchet wear. You may replace several windows before a crown.

Can I use the 32000 with a flip-front DP visor?

Yes — the DP crown is intended to carry DP windows including flip-front options such as the Sellstrom 32188 Replacement Flip-Front Visor for DP4. Confirm the specific window is rated for your DP shield model before pairing them.

Is this the right part for a plasma or flame-cutting DP shield?

If your cutting shield is a Sellstrom DP unit like the Sellstrom 32152 Plasma/Flame Cutting Face Shield, the 32000 crown can restore its suspension. The crown itself does not provide IR shading — that comes from the shaded window — so match the correct shaded DP window to the hazard.

Should welders buy the 32000?

Only if they already run a Sellstrom DP shield and need a new crown. The headgear adds no shade or IR protection — that is the window's job. Welders shopping for a complete solution should read the best face shields for welding, grinding and cutting guide first.

What is the alternative if I do not own a Sellstrom DP shield?

Buy a complete shield rather than a crown. Ready-to-wear options include the Sellstrom 32010 DP4 or the Honeywell Uvex Bionic, or browse the full face shields collection to match your hazard.

How does the Sellstrom crown compare to the Jackson 370 Speed Dial headgear?

Both are ratchet suspensions, but they belong to different ecosystems: the 32000 fits Sellstrom DP windows while the Jackson 20695 370 Speed Dial fits Jackson MAXVIEW and Quad500 shields. Choose the one that matches the windows you already own — they are not interchangeable.

How long does a ratchet crown last?

It depends on use. The crown outlasts the window in most settings but is still a wear item — heavy daily duty will eventually loosen or crack the ratchet. High-volume shops should keep a spare on hand alongside spare DP windows so a failure never sidelines a worker.

Does buying the crown plus a window cost more than a complete shield?

Sometimes. If you only need the crown, it is much cheaper than a new assembly. But once you add a fresh window too, the combined cost can approach a complete Sellstrom 32010 DP4 — so price both paths before deciding.

Where does the face shield fit in the eye and face protection hierarchy?

It sits on top of primary eyewear as a secondary barrier against splashes, sparks, and flying debris that can wrap around glasses. The crown keeps that barrier positioned correctly. For the full breakdown of how shields, glasses, and goggles work together, read ANSI Z87.1 explained and the best face shields guide.