PIP MaxiFlex G-Tek Ultimate Micro-Foam Nitrile Gloves Review

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The PIP MaxiFlex G-Tek Ultimate Nitrile Coated Work Gloves (34-874) is a nitrile coated work gloves from PIP, listed on Amazon. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

Published July 16, 2026 · Last updated July 27, 2026

The PIP MaxiFlex G-Tek Ultimate (34-874) is an 18-gauge seamless nylon/spandex knit glove with a micro-foam nitrile coating applied to the palm, fingers, and fingertips. The micro-foam nitrile provides 360° breathability, enhanced grip on dry and light-wet surfaces, and tactile sensitivity that general-purpose coated gloves cannot match. Widely used in electronics manufacturing, quality inspection, food processing, and packaging operations where dexterity and grip are critical.

The MaxiFlex G-Tek is specified for production environments requiring fine motor control — circuit board handling, component inspection, pharmaceutical packaging, and light assembly lines. If you need heavier-duty grip for automotive or rough-surface work, the Grease Monkey Nitrile Work Gloves provide a thicker, more durable palm coating. For cut-rated applications (A4–A7), see the cut-resistant gloves collection .

Micro-foam nitrile is a nitrile coating applied with tiny air pockets in the matrix, creating a textured surface that grips dry and lightly oily surfaces better than smooth nitrile. It is also more breathable than solid nitrile. For precision assembly and inspection work, micro-foam provides better tactile feedback and sweat management than traditional smooth-coat gloves.

Where It Earns Its Slot

Where it earns its slot: The PIP MaxiFlex G-Tek Ultimate (34-874) is an 18-gauge seamless nylon/spandex knit glove with a micro-foam nitrile coating applied to the palm, fingers, and fingertips. The micro-foam nitrile provides 360° breathability. The rest of this review holds the listing to exactly that brief — limits, alternatives, and the ranked guides included.

Honest Limits

Its boundaries are the category's: protection is limited to the rated hazards at the rated levels, chemical exposure is governed by breakthrough time rather than resistance in the abstract, and fit determines whether any of it reaches the hand. Verify the marking against the task before relying on it.

Pros and Cons

Alternatives in the Same Lane

• SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
• MCR Safety PD6901 Predator Impact Gloves
• MCR Safety PD4900 Predator Impact Gloves
• MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
• MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
• MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
• MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
• MCR Safety PD4971 Predator Impact Gloves
• MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im

Hand Protection Guides

• Cut-Resistant Gloves Complete Guide
• Best Cut-Resistant Gloves
• Best Impact-Resistant Gloves
• Nitrile Gloves Complete Guide
• Best Mechanics Gloves

Browse by Category

• Cut-Resistant Gloves
• Impact-Resistant Gloves
• Nitrile Gloves
• Leather Work Gloves
• Chemical-Resistant Gloves
• Mechanics Gloves

Frequently Asked Questions

General questions about ratings, OSHA limits and fit are answered in the Cut-Resistant Gloves Complete Guide guide.

The Bottom Line

Rated 4.5/5 on documented spec, configuration, and value. The PIP MaxiFlex G-Tek Ultimate Nitrile Coated Work Gloves (34-874) does the job its listing describes — the guides above tell you whether it's the right pick against the field.

Common questions

What does the PIP MaxiFlex G-Tek Ultimate Nitrile Coated Work Gloves (34-8 listing actually document?

The PIP MaxiFlex G-Tek Ultimate (34-874) is an 18-gauge seamless nylon/spandex knit glove with a micro-foam nitrile coating applied to the palm, fingers, and fingertips. The micro-foam nitrile provides 360° breathability, enhanced grip on dry and light-wet surfaces, and tactile sensitivity that gene…

What are the alternatives to the PIP MaxiFlex G-Tek Ultimate Nitrile Coated Work Gloves (34-8?

The sibling nitrile coated work gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.

Sources. Requirements referenced here come from OSHA 29 CFR 1910 and the NIOSH recommendations. Where a consensus standard governs, the ANSI document is named in the text.

Related reference

Related on this site: nitrile gloves: the complete buyer's guide, nitrile-coated vs pu-coated work gloves: which grip wins?, best nitrile gloves for food service, nitrile vs vinyl gloves: cost, protection & best uses, best accelerator free nitrile gloves, and best black nitrile gloves.

Why trust WC Safety

WC Safety is an independent, affiliate-supported review site. It is not a retailer: it holds no inventory, takes no orders, and earns only from qualifying purchases through clearly marked links — which never changes what a product is rated to do. Standards language is taken from the regulation text directly, and ratings are reported as the manufacturer publishes them. We run no laboratory and perform no testing of our own. Where published sources disagree, we say so and plan on the conservative figure rather than the flattering one.

Our methodology

Figures come from the regulation and the published specification, in that order. Derated numbers are calculated, not estimated. Nothing here is presented as a measured result, because we measure nothing.

Researched and written by Steven Eaton, editor of WC Safety. Steven holds no safety certification and does not test products; this page compares what manufacturers and regulators publish, with the gaps in that record marked. Last reviewed August 2026.