Is the Jackson Safety 29087 F20 Clear Polycarbonate Face Shield Window the right replacement window for your existing Jackson Safety headgear?

Short answer: If you already run a Jackson Safety crown-and-ratchet headgear and your old lens is scratched or hazed, the Jackson Safety 29087 F20 is a straightforward impact-grade swap — clear polycarbonate, ANSI Z87.1-compliant, sold as a single window. It is a lens only, with no headgear in the box, so it is the wrong buy if you need a complete unit; for that, start with the face shields collection or the best face shields guide. Confirm your frame is a Jackson system before ordering, because a window is never cross-brand compatible.

Jackson Safety 29087 F20 Clear Polycarbonate Face Shield Window Review (2026)

The Jackson Safety 29087 F20 is not a complete face shield — it is the clear polycarbonate window that drops into a compatible Jackson Safety headgear assembly once your original lens is too scratched, hazed, or pitted to see through safely. Like every face shield, it is secondary protection worn over primary eyewear such as safety goggles, a point the safety glasses vs face shields guide explains in OSHA terms. The window itself is injection-molded polycarbonate, the material ANSI Z87.1 rates above acetate and propionate for high-impact work, which makes the 29087 a sensible match for grinding, chipping, and general manufacturing hazards rather than torch or arc work. Because compatibility is system-specific, treat this as a replacement for Jackson headgear only — pair it with a complete Jackson unit like the Jackson Safety 14201 MAXVIEW or browse sibling Jackson windows such as the Jackson Safety 29104 and Jackson Safety 30706, and never try to fit it to a Fibre-Metal crown or an MSA V-Gard slot.

Editorial verdict — 4.1/5
As a clear impact-grade replacement lens for an existing Jackson Safety headgear, the 29087 F20 is a low-cost way to extend a system you already own; it earns its keep only if your crown is genuinely a Jackson frame, because a window alone protects nobody without compatible headgear.VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are accurate as of the date shown and are subject to change. Full affiliate disclosure.

Who it is for

• Maintenance and manufacturing crews who already run Jackson Safety MAXVIEW or Quad headgear and need a fresh clear lens
• Grinders and chippers who scratch out clear windows fast and want a low-cost impact-grade swap, per the best face shields guide
• Safety managers stocking spare Jackson windows alongside complete units from the face shields collection
• Shops standardized on the Jackson hard-hat interchange system who also buy the Jackson Safety 30706 window
• Buyers who explicitly do NOT need welding protection — for that see the welding face shields guide

What the Jackson Safety 29087 F20 does well

Impact-grade polycarbonate

The 29087 is injection-molded polycarbonate, which ANSI Z87.1 high-impact testing rates above acetate and propionate — the right material class for grinding and chipping hazards covered in the how to choose a face shield guide.

True-color clear optics

As a clear window it preserves color recognition for inspection and assembly work, unlike the tinted Jackson 29080 IR 5.0 which is built for radiant-heat tasks instead.

Replace-only economics

Buying just the window lets you keep your existing crown and ratchet, the same logic behind sibling replacement lenses like the Jackson Safety 29104 and the Honeywell 11390064 visor.

Keeps the assembly compliant

A Z87.1-compliant lens keeps the whole shield rated for OSHA 1910.133 impact work — the standard breakdown lives in ANSI Z87.1 explained and what does Z87+ mean.

Resists UV crazing

Polycarbonate holds up to UV-induced surface crazing better than budget acetate, so a clear Jackson window stays usable longer outdoors than a cheap throwaway visor from the face shields collection.

Where the Jackson Safety 29087 F20 falls short

No headgear included

This is a lens, not a unit. If you do not already own a Jackson crown and ratchet, you need a complete shield instead — see the Jackson Safety 14201 MAXVIEW or the best face shields guide.

Jackson-only fit

A Jackson window will not seat in a Fibre-Metal, MSA, or Sellstrom frame. Owners of other systems should match their own brand — for example the Sellstrom 32100 DP4 window or the Fibre-Metal 4178CL.

No welding shade

Clear polycarbonate has no IR rating, so it cannot replace a welding lens. For torch and arc work choose an IR window like the Fibre-Metal 4178IRUV3 per the welding face shields guide.

Specs left to the buyer

The listing does not publish exact window dimensions or pin pattern, so you must confirm it matches your specific Jackson headgear before ordering rather than assuming universal fit.

Jackson Safety 29087 F20 vs the competition

Compare prices on Amazon →Jackson Safety 29087 F20 on Amazon[Jackson Safety 29104]

When to step up from the Jackson Safety 29087 F20

If you do not already own Jackson headgear, step up to a complete assembly rather than a bare window: the Jackson Safety 14201 MAXVIEW and Jackson Safety 14200 ship with ratchet crowns and oversized clear windows, and the matching Jackson 370 Speed Dial headgear accepts these windows. For a fundamentally different platform, the Honeywell Uvex Bionic (reviewed here) or an MSA V-Gard system are strong all-in-one options in the face shields collection.

Category context

Face protection splits three ways, and the 29087 sits firmly in one lane. Window material drives hazard fit: polycarbonate like this one is the impact choice for grinding and chipping; PETG and propionate favor chemical splash; steel mesh suits heat and brush work; and IR shade numbers are reserved for welding and torch cutting — the trade-offs are laid out in how to choose a face shield. Just as important is the complete-shield versus replacement-window distinction: a complete shield from the face shields collection includes the crown and suspension, while the 29087 is the consumable lens only. Mount style matters too — Jackson uses a crown-and-ratchet pin system, so a Jackson window like this one will not interchange with a Fibre-Metal speedy-loop, an MSA cap slot, or a 3M H8A crown.

Total cost of ownership

The economics of a replacement window are simple: a clear polycarbonate lens is a consumable that scratches and hazes with abrasive use, so plan to swap it on a cadence set by your work, while a quality Jackson crown and ratchet headgear lasts through many lens cycles. Buying the 29087 instead of a whole new assembly is the lower total cost of ownership — provided your frame is genuinely a Jackson system, since a mismatched window is wasted money. Keep a couple of spares on the shelf alongside complete units from the face shields collection, and if your old headgear ratchet is also failing, replace the crown too rather than forcing a fresh window onto a worn frame, as covered in the best face shields guide.

Final verdict

Buy the Jackson Safety 29087 F20 if — and only if — you already run a compatible Jackson Safety crown-and-ratchet headgear and need a clear, impact-grade replacement lens for grinding, chipping, or general manufacturing; it is an honest, low-cost consumable swap. If you need a full unit, start with the Jackson Safety 14201 MAXVIEW or the best face shields guide. If you weld or torch-cut, skip clear polycarbonate entirely and choose an IR window from the welding face shields guide. Owners of other brands should match their own system — see the Fibre-Metal 4178CL or Honeywell 11390064 — and remember that every face shield is secondary to primary eyewear, as the safety glasses vs face shields guide explains.

VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

Jackson Safety 29087 F20 FAQ

Is the Jackson Safety 29087 a complete face shield or just the window?

It is the window only — a clear polycarbonate replacement lens with no crown, ratchet, or suspension. You must already own a compatible Jackson Safety headgear to use it. If you need a complete unit, see the face shields collection or the best face shields guide.

What headgear does the 29087 F20 window fit?

It is designed for compatible Jackson Safety face shield headgear assemblies. Because fit is system-specific, confirm your crown is a Jackson frame before ordering. Sibling Jackson windows include the 29104 and 30706.

Will the 29087 fit a Fibre-Metal or MSA crown?

No. A Jackson window will not seat in a Fibre-Metal speedy-loop, an MSA V-Gard slot, or a 3M H8A crown — windows are never cross-brand compatible. Fibre-Metal owners should look at the 4178CL, and MSA owners at the V-Gard system.

What hazards is the 29087 rated for?

As clear injection-molded polycarbonate, it is built for impact hazards like grinding, chipping, and general manufacturing, and is ANSI Z87.1-compliant. It is not a chemical-splash-optimized or welding lens. The material-to-hazard map is in how to choose a face shield.

Can I use the 29087 for welding or torch cutting?

No. It is clear polycarbonate with no IR shade rating, so it provides no protection from welding or torch radiant energy. For those tasks choose an IR window such as the Fibre-Metal 4178IRUV3 and read the welding face shields guide.

Does a face shield replace my safety glasses?

No. A face shield is secondary protection worn over primary eyewear such as safety glasses or goggles, per OSHA 29 CFR 1910.133. The safety glasses vs face shields guide explains why you wear both.

Is the 29087 ANSI Z87.1 compliant?

Yes. The window is constructed to meet ANSI Z87.1 basic-impact requirements for general industrial use. For what the standard and the plus marking mean, see ANSI Z87.1 explained and what does Z87+ mean.

How is the 29087 different from the Jackson 29104 window?

Both are Jackson replacement windows; the 29104 is described as a universal pin-mount window for the Jackson hard-hat interchange system, while the 29087 is the F20 clear polycarbonate window. Match whichever the listing pairs with your specific frame, and verify dimensions before ordering.

How often should I replace a clear polycarbonate window?

Replace it whenever scratches, haze, or pitting reduce visibility or compromise the impact surface — abrasive work wears clear lenses fastest. Keeping spares like the 29087 on hand keeps your Jackson headgear in service, a stocking strategy discussed in the best face shields guide.

Why buy a window instead of a whole new face shield?

Because the crown and ratchet outlast the lens, replacing only the consumable window is the lower total cost of ownership. If the ratchet itself is failing, buy a complete unit from the face shields collection instead of forcing a new window onto a worn frame.

Does the 29087 offer chemical splash protection?

It is a polycarbonate impact window, not a splash-optimized lens. For dedicated chemical work, PETG or propionate windows and splash-rated shields are a better match — see options in the face shields collection and the material guidance in how to choose a face shield.

What complete Jackson shield uses these windows?

Jackson MAXVIEW and Quad-series assemblies such as the 14201 and 14200 run on Jackson ratchet headgear like the 370 Speed Dial. Verify the exact window your model takes before buying.

Can the 29087 mount over a hard hat?

The window itself does not mount anything — the headgear does. Jackson headgear supports a hard-hat interchange system, so over-hard-hat use depends on your crown, not the lens. Pair the window with a complete Jackson assembly from the face shields collection.

Is polycarbonate better than acetate or propionate for this window?

For impact, yes — ANSI Z87.1 high-impact testing rates polycarbonate above acetate and propionate, which is why the 29087 suits grinding and chipping. Propionate and acetate can favor certain chemical environments, a trade-off covered in how to choose a face shield.

What if I own a Sellstrom or ERB headgear?

Then this Jackson window is the wrong part. Match your brand — Sellstrom DP4 owners want the 32100 window, and ERB owners the 15151 replacement lens. Cross-brand windows do not seat correctly.

Does the 29087 come with anti-fog coating?

The listing describes it as a clear polycarbonate window and does not state an anti-fog coating, so do not assume one. If fogging is a problem, look at complete shields that specify anti-fog, several of which are flagged in the best face shields guide.

Is the 29087 a good value?

As a single replacement window for an existing Jackson system, it is a sensible low-cost consumable. Its value depends entirely on already owning compatible Jackson headgear — if you do not, the money is better spent on a complete unit from the face shields collection.