Is the Jackson Safety 20695 370 Speed Dial the right replacement headgear for restoring a worn MAXVIEW or Quad500 face shield system?

Short answer: Yes — if you already run a Jackson MAXVIEW 14200/14201 or Quad500 14260 setup and the suspension or ratchet has worn out, the 20695 370 Speed Dial crown restores tool-free fit without replacing your windows. It is a headgear/crown only, so confirm you have (or are buying) a compatible window first and read our how to choose a face shield and best face shields guide before ordering. If you need a complete out-of-box shield instead, the assembled MAXVIEW 14201 ships ready to wear.

Jackson Safety 20695 370 Speed Dial Replacement Headgear Review (2026)

The Jackson Safety 20695 is the 370 Speed Dial ratcheting headgear (crown) for the Jackson F4XP system — it is the part that sits on your head, carries the suspension and ratchet knob, and holds a window in front of your face. Per the listing, it is a "Replacement 370 Speed Dial ratcheting headgear for F4XP" and is "compatible with MAXVIEW 14200/14201 and Quad500 Model 14260" windows. Because a face shield is OSHA-defined secondary protection worn over primary eyewear under ANSI Z87.1, this headgear is one half of a two-part system — it does not replace your safety glasses or goggles, and it is system-specific: a Jackson 370 crown does not interchange with a Fibre-Metal F300 or MSA V-Gard carrier. If your window is fine but the headgear is cracked, sweat-rotted, or the ratchet has stopped holding tension, this is the part to buy; if your window is the worn item, look instead at the MAXVIEW and Quad500 SRW14233 shields, or browse the full face shields collection.

Editorial verdict — 4.2/5
As a replacement crown it is sound value: for a fraction of a complete shield it brings a worn MAXVIEW or Quad500 system back to spec with a tool-free ratchet, provided you confirm window compatibility before ordering.VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are accurate as of the date shown and are subject to change. Full affiliate disclosure.

Who it is for

• Maintenance and facilities crews standardized on the Jackson MAXVIEW 14200 whose headgear has worn before the window
• Grinders and chippers running a MAXVIEW 14201 who need to restore a secure ratchet fit — pair with impact-rated safety glasses underneath
• Welders and torch cutters on the Quad500 SRW14233 shade-8 system needing a fresh crown
• Safety managers buying spare crowns to extend the service life of an existing Jackson fleet rather than replacing whole units
• Workers who run a face shield over a hard hat and need a clean suspension — see hard hats for the matching brim system

What the Jackson Safety 20695 370 Speed Dial does well

Tool-free ratchet fit

The 370 Speed Dial ratchet lets you dial head size up or down with gloves on and without removing the shield, which is the core reason to choose a Jackson crown over a generic pin-mount headgear. See how to choose a face shield for why suspension quality matters.

Keeps your existing windows

Because it accepts MAXVIEW 14200/14201 and Quad500 14260 lenses, you reuse windows you already own instead of paying for a full new shield. Compare against the assembled MAXVIEW 14201.

Restores the most common failure point

On a heavily used shield the suspension and ratchet wear out long before the polycarbonate window cracks; replacing just the crown is the targeted, lower-cost fix. Browse alternatives in the face shields collection.

Compliant within the system

Assembled with a compatible window it meets ANSI Z87.1 and OSHA 1910.133 for face protection — though remember a shield is always secondary to primary eyewear.

Fleet standardization

For shops already on Jackson, buying spare 20695 crowns keeps every station on one suspension and one window family, simplifying training and stocking versus mixing in MSA or Fibre-Metal systems.

Where the Jackson Safety 20695 370 Speed Dial falls short

No window in the box

This is the headgear/crown only. If you do not already own a MAXVIEW 14200/14201 or Quad500 14260 window it does nothing on its own — you would also need to buy a window, at which point an assembled MAXVIEW 14201 may make more sense.

Locked to the Jackson system

It will not mount Fibre-Metal, MSA, Sellstrom or 3M windows. Cross-brand owners should match their own carrier — for example the Fibre-Metal F300 crown or MSA V-Gard kit.

Not eye protection

A crown plus window is secondary protection; it does not replace safety glasses or goggles, and the listing offers no claim otherwise. Read safety glasses vs face shields.

Wear items recur

Sweatband and ratchet pawls are consumables; budget for them again over the life of the shield rather than treating this as a permanent fix.

Jackson Safety 20695 370 Speed Dial vs the competition

Compare prices on Amazon →Jackson Safety 20695 370 Speed Dial on Amazon[Fibre-Metal F300](/pr

When to step up from the Jackson Safety 20695 370 Speed Dial

If you want a ready-to-wear unit rather than a spare part, step up to the complete Jackson MAXVIEW 14200 or 14201, which pair this same ratchet crown with a polycarbonate window out of the box, or the Quad500 SRW14233 for shade-8 welding work. Cross-brand shops should instead match their own system — the Fibre-Metal F5500 hard-hat shield or Honeywell Uvex Bionic (see our Uvex Bionic review) are full assemblies in their own ecosystems.

Category context

Face protection comes in three buying decisions: hazard (impact from grinding favors polycarbonate, chemical splash favors PETG or propionate, radiant heat from welding needs an IR/shade window — see the best face shields for welding, grinding and cutting guide); product type (a complete shield vs a bare replacement window vs headgear like this 20695); and mount style (ratchet crown, cap/hard-hat slot adapter, or speedy-loop). The 20695 sits firmly in the headgear category — it answers the mount-and-fit question, not the hazard question, because the window you pair with it determines what hazards you are rated for. That is why this guide is a compatibility check rather than a wearability test: the protection rating travels with the MAXVIEW or Quad500 window, and the crown's job is to hold that window securely and comfortably. For the underlying standards see ANSI Z87.1 explained and what the Z87+ mark means.

Total cost of ownership

Total cost of ownership on a Jackson shield is driven by two separate wear curves. Polycarbonate windows scratch, fog-coat-degrade, and get pitted by grinding sparks, so they are replaced most often — that is what the MAXVIEW and Quad500 windows are for. The headgear (this 20695) wears more slowly but eventually the ratchet loses tension, the sweatband rots, or the crown cracks; replacing just the crown rather than a whole assembly is the cheaper path, which is the entire value case here. Plan to buy windows several times for each crown, keep one or two spare 20695 crowns per fleet to avoid downtime, and remember the suspension's own sweatbands are consumables. Compared with cross-brand alternatives like the Sellstrom 32000 or MSA kit, staying on one system keeps per-unit replacement costs predictable; see the best face shields guide for system-level cost comparisons.

Final verdict

Buy the Jackson Safety 20695 if you already run a MAXVIEW 14200/14201 or Quad500 14260 system and the headgear — not the window — is what has worn out; it is the targeted, lower-cost way to restore a tool-free ratchet fit while keeping your existing lenses. If you have no compatible window yet, skip the part and buy a complete shield like the MAXVIEW 14201 or Quad500 SRW14233. Cross-brand owners should match their own ecosystem — see the Fibre-Metal F300, MSA V-Gard kit, or the full face shields collection. Whatever crown you choose, keep impact-rated primary eyewear underneath per OSHA's secondary-protection rule.

VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

Jackson Safety 20695 370 Speed Dial FAQ

Is the Jackson Safety 20695 a complete face shield or just the headgear?

It is the headgear/crown only — the 370 Speed Dial ratcheting suspension for the F4XP system. It does not include a window, so you must already own or separately buy a compatible MAXVIEW or Quad500 window. If you want a ready-to-wear unit, choose a complete shield from the face shields collection instead.

Which windows fit the 20695 370 Speed Dial headgear?

Per the listing it is compatible with the MAXVIEW 14200/14201 windows and the Quad500 Model 14260 window. It is a Jackson-system crown, so it will not accept Fibre-Metal, MSA, Sellstrom or 3M windows. See how to choose a face shield for matching parts within a system.

Will the 20695 fit my Fibre-Metal or MSA face shield?

No. Face shield headgear is system-specific — the 20695 mounts only Jackson MAXVIEW and Quad500 windows. If you run another brand, match your own carrier, such as the Fibre-Metal F300 crown or the MSA V-Gard accessory kit.

Does buying this headgear give me eye protection?

No. A face shield — crown plus window — is secondary protection under OSHA 1910.133 and must be worn over primary safety glasses or goggles. The 20695 by itself provides neither eye protection nor face coverage until a window is fitted. Read safety glasses vs face shields.

When should I replace the headgear instead of the whole shield?

Replace just the crown when the window is still serviceable but the ratchet no longer holds tension, the suspension band is sweat-rotted, or the crown is cracked. That is the exact scenario the 20695 is built for. If the window is the worn item, replace the window or buy a complete MAXVIEW 14201.

Is the 20695 ANSI Z87.1 compliant?

The listing states it is part of an ANSI Z87.1 / OSHA 1910.133 compliant face-shield system. Compliance applies to the assembled shield (crown plus a compatible window), not the crown in isolation. For what the standard covers, see ANSI Z87.1 explained and what Z87+ means.

What does the 370 Speed Dial ratchet do?

It is a tool-free ratchet adjustment that lets you tighten or loosen head size with gloves on, without removing the shield. A reliable ratchet is one of the main reasons to stay on a Jackson crown rather than a generic pin-mount headgear — see how to choose a face shield.

Can I use the 20695 with a hard hat?

Jackson headgear suspensions are typically configurable for standalone wear or over-cap use, and the listing describes a headgear component for standalone deployment. If your work requires a brim, confirm the hard-hat interchange path and browse compatible hard hats.

How is this different from a replacement window like the Jackson 30706?

The Jackson 30706 is the lens that mounts in a headgear; the 20695 is the headgear that holds a lens. They are complementary parts — a window wears from scratches and grinding pits, while a crown wears from ratchet fatigue and sweat. See how to choose a face shield.

Should I just buy a complete MAXVIEW instead?

If you have no compatible window yet, a complete MAXVIEW 14200 or 14201 is usually the better buy because it ships crown and window together. The 20695 only saves money when you are reusing windows you already own. Compare options in the best face shields guide.

Does the 20695 work with the Quad500 welding shield?

The listing lists Quad500 Model 14260 as compatible. For shade-8 IR welding work, pair the crown with a Quad500 window — or buy the complete Quad500 SRW14233. Welding-specific selection is covered in the welding/grinding/cutting face shield guide.

What hazards is the assembled shield rated for?

That depends entirely on the window you fit. A clear polycarbonate MAXVIEW window covers impact and splash for general industrial work; a Quad500 shade-8 IR window adds radiant-heat protection for welding. The crown does not change the rating — see how to choose a face shield.

Is the 20695 good value?

For owners of an existing MAXVIEW or Quad500 system, yes — it restores a worn shield for far less than a complete new unit. For anyone without a compatible window, it is poor value because you would still need to buy a window. See total-cost guidance in the best face shields guide.

How does it compare to the Sellstrom 32000 crown?

Both are replacement ratchet crowns, but they serve different systems: the 20695 is for Jackson MAXVIEW/Quad500 windows, while the Sellstrom 32000 is for the Sellstrom DP4 family. Buy the one matching the windows you already own — they are not interchangeable.

Will the ratchet eventually wear out again?

Yes — ratchet pawls and sweatbands are consumables on any headgear, so plan to service or replace them over the shield's life. That recurring wear is normal and is why keeping spare crowns on hand reduces downtime in a fleet. See how to choose a face shield.

Do I still need safety glasses under a face shield built on this crown?

Yes. OSHA treats a face shield as secondary protection, so impact-rated safety glasses or goggles are required underneath even with a full Jackson assembly. The detail is explained in safety glasses vs face shields.

Where can I see other Jackson face shield options?

Browse the face shields collection and the best face shields guide, or compare the complete MAXVIEW 14200, MAXVIEW 14201 and Quad500 SRW14233 shields.