Is the HexArmor Rig Lizard 2095 the right cut-and-impact glove for rigging and oil & gas?

Short answer: Yes — for rigging, oil & gas and heavy industrial crews who need high cut resistance and back-of-hand impact protection in one thin, grippy glove. The HexArmor Rig Lizard 2095 pairs an ANSI/ISEA 105 A6 cut shell with a rated ANSI/ISEA 138 level-2 impact exoskeleton and a tactile PU palm. If your hazard is needles or pure cut without impact, a higher A8/A9 knit or the HexArmor Helix 2076 is the cheaper, lighter pick.

HexArmor Rig Lizard 2095 Gloves Review (2026)

The HexArmor Rig Lizard 2095 sits in a narrow but important slot in the cut-glove lineup: a thin, dexterous knit that still carries near-top-tier cut resistance and rated back-of-hand impact protection. Most gloves do one or the other. This review covers what the Rig Lizard 2095 does well, where it falls short, how it compares to its true competitive set and its HexArmor siblings, and exactly which crews should buy it. For the full category overview, start with our cut-resistant gloves complete guide.

Editorial verdict — 4.5/5: the HexArmor Rig Lizard 2095 is one of the best thin cut-and-impact gloves for rigging and oil & gas — A6 cut, ANSI/ISEA 138 level-2 dorsal impact and a grippy PU palm, at a fair ~$30. It loses points only on palm abrasion life versus leather and on price versus pure cut knits.

VIEW ON WC SAFETY → CHECK PRICE ON AMAZON →

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are accurate as of the date shown and are subject to change. Full affiliate disclosure.

Who the HexArmor Rig Lizard 2095 is for

• Riggers and crane crews handling wire rope, shackles and racked steel.
• Oil & gas floor hands working pipe, tongs and drill collars.
• Heavy industrial and fabrication crews exposed to both cut and smash hazards.
• Anyone who needs tool dexterity but can't give up cut or impact protection.

Browse the full cut-resistant gloves collection and the impact-resistant gloves collection to see where this glove sits in the range.

What the HexArmor Rig Lizard 2095 does well

High cut resistance without bulk

The 13-gauge HPPE-and-glass-blend shell earns an ANSI/ISEA 105 A6 rating — the seventh of nine levels — while staying thin enough to feel a wrench or a shackle pin. That is the hard trick this glove pulls off. For the full scale, see ANSI/ISEA 105 cut levels A1 through A9.

Rated back-of-hand impact protection

The IR-X Impact Exoskeleton on the back of the hand carries an ANSI/ISEA 138 level-2 rating — the middle of the three impact tiers — absorbing the pinch-and-smash hazards that injure hands on rig floors. Our ANSI/ISEA 138 impact standard explainer shows what each level means.

Grip and dexterity from the PU palm

The polyurethane palm coating grips dry and lightly oily tooling and keeps fingertip feel high, which is why the 2095 suits tool work better than a thick nitrile-foam dip.

Visibility built in

The hi-vis blue-and-yellow Thin Lizzie color scheme keeps hands visible around moving equipment — a real safety feature, not just styling.

Where the HexArmor Rig Lizard 2095 falls short

Palm abrasion life vs leather

A PU palm wears faster than the leather palm on a glove like the HexArmor Chrome SLT 4073 under constant dragging abrasion. If your work eats palms, leather lasts longer.

Price vs pure cut knits

At ~$30 it costs more than a pure A6 cut knit without impact backing, such as the HexArmor Helix 2076. You are paying for the impact exoskeleton; skip it if impact isn't a hazard.

Not chemical, heat, or needle rated

High cut is not the same as high puncture against fine needles, and the 2095 is neither chemical- nor heat-rated. For thorn and heavy puncture use the HexArmor ThornArmor 3092; for cut-and-heat use the HexArmor Chrome SLT 4066.

HexArmor Rig Lizard 2095 vs the competitive set

How the Rig Lizard 2095 stacks up against the other cut-and-impact gloves we stock:

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are accurate as of the date shown and are subject to change. Full affiliate disclosure.

HexArmor Rig Lizard 2095 vs its HexArmor siblings

Within the HexArmor cut/impact range, the differences come down to palm material and whether you need impact backing:

• Buy the Rig Lizard 2095 if you need A6 cut plus rated back-of-hand impact in a thin, grippy PU-palm glove for rigging, oil & gas and tool work.
• Buy the HexArmor Chrome SLT 4073 if you want a leather palm for heavier abrasion alongside impact protection.
• Buy the HexArmor Helix 2076 if you want the same A6 cut without the impact exoskeleton, lighter and cheaper.
• Buy the HexArmor ThornArmor 3092 if thorn or heavy puncture — not impact — is your main hazard.

Shop the HexArmor cut/impact range on Amazon →Rig Lizard 2095Chrome SLT 4073Helix 2076ThornArmor 3092

Pairings and spares for the HexArmor Rig Lizard 2095

Because the PU palm is the wear point, most crews keep a spare pair on rotation. For food-contact lines a separate HexArmor Helix 3033 A5 food-safe glove covers a different task, while the HexArmor Helix 2076 is the natural no-impact backup for the same A6 cut level. See the full impact-resistant gloves collection for alternates.

Top pairings on Amazon →Rig Lizard 2095Helix 2076 spareHelix 3033 A5

Category context: thin cut-and-impact gloves

The Rig Lizard 2095 belongs to a small class of gloves that combine a high cut shell with rated dorsal impact while staying thin. Thicker impact gloves (leather drivers, mechanics styles) trade feel for palm life; pure cut knits drop the impact armor for lower cost. Understanding that trade-off is the whole decision — our cut-resistant vs impact-resistant gloves guide and best impact-resistant gloves roundup map the field, and the best cut-resistant gloves for mechanics guide covers the lighter end.

Total cost of ownership

At ~$29.99 a pair, the Rig Lizard 2095's running cost is driven by PU-palm wear rather than the cut shell, which outlasts the coating. Crews in heavy abrasion should budget for more frequent replacement than a leather-palm glove; crews in mostly cut-and-impact (not drag-abrasion) work get long life. Inspect before each shift and retire the glove when the palm coating thins or the shell shows cut-through — a worn glove no longer carries its rated A6 cut or level-2 impact. For a glass-heavy line, weigh dedicated picks in our best cut-resistant gloves for glass handling guide before standardizing.

Final verdict: HexArmor Rig Lizard 2095

4.5/5. Buy the HexArmor Rig Lizard 2095 if you need high cut resistance and rated back-of-hand impact in a thin, tactile glove for rigging, oil & gas or heavy industrial work. Buy the HexArmor Chrome SLT 4073 instead if you want a leather palm for longer abrasion life, or the HexArmor Helix 2076 if you want the same A6 cut without paying for impact backing.

VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

HexArmor Rig Lizard 2095: frequently asked questions

Is the HexArmor Rig Lizard 2095 cut-resistant enough for rigging and oil & gas work?

Yes. The HexArmor Rig Lizard 2095 carries an ANSI/ISEA 105 A6 cut rating on a 13-gauge HPPE and glass-blend shell, which sits near the top of the nine-level scale and covers the slips against pipe edges, wire rope and sharp tooling common in rigging and oil & gas. For the full scale, see our ANSI/ISEA 105 cut levels explained guide. If your hazard is needles or fine blades rather than back-of-hand impact, an A8 or A9 knit may fit better.

What ANSI cut and impact levels does the HexArmor Rig Lizard 2095 carry?

The Rig Lizard 2095 is rated ANSI/ISEA 105 cut level A6, puncture level 5 and abrasion level 4, with a back-of-hand IR-X Impact Exoskeleton rated ANSI/ISEA 138 impact level 2. That combination of high cut plus rated dorsal impact is the glove's whole reason to exist; our ANSI/ISEA 138 impact standard explainer breaks down what the impact levels mean.

HexArmor Rig Lizard 2095 vs Chrome SLT 4073 — which should I buy?

Buy the Rig Lizard 2095 when you need a thinner, more dexterous PU-palm knit with hi-vis impact backing for handling pipe and tools. Step to the HexArmor Chrome SLT 4073 when you want a leather-reinforced palm for heavier abrasion and a more rugged drivers-style build. Both are cut-and-impact gloves; the 2095 favors feel, the 4073 favors palm durability.

Is the HexArmor Rig Lizard 2095 good for impact protection on the back of the hand?

Yes — the dorsal IR-X Impact Exoskeleton is rated ANSI/ISEA 138 level 2, the middle tier of the three-level impact scale, so it absorbs the pinch-and-smash hazards of swinging tools, drill pipe and racked steel. If back-of-hand impact is your primary hazard, also compare the field in our best impact-resistant gloves guide.

What is the HexArmor Rig Lizard 2095 made of?

It uses a 13-gauge HPPE (high-performance polyethylene) and glass-blend shell for 360-degree cut resistance, a polyurethane (PU) palm coating for grip and abrasion resistance, and a molded back-of-hand impact exoskeleton. The PU palm keeps the glove thin and tactile, which is why it suits tool work rather than a thicker nitrile-foam dip.

Does the HexArmor Rig Lizard 2095 work with touchscreens?

The Thin Lizzie build is designed to stay thin and dexterous so you can operate tablets and tool interfaces without removing the glove, though touchscreen response varies by device and wear. For tasks needing maximum fingertip feel at a lower cut level, an A2-A3 PU-palm knit like the PIP MaxiFlex Cut 34-8743 is an alternative.

Is the HexArmor Rig Lizard 2095 worth it at around $30 a pair?

For rigging, oil & gas and heavy industrial crews, yes — you are paying for A6 cut plus rated dorsal impact in one thin, grippy glove, which is hard to match below that price. For light assembly or general handling without impact hazards, a cheaper A2-A4 knit from the cut-resistant gloves collection delivers most of the value for less.

What does the HexArmor Rig Lizard 2095 NOT protect against?

It is not a chemical glove, not heat-rated, and the A6 cut shell is not a substitute for puncture-focused gloves against hypodermic needles. For thorn and heavy puncture hazards look at the HexArmor ThornArmor 3092; for cut-and-heat use the HexArmor Chrome SLT 4066.

HexArmor Rig Lizard 2095 vs Helix 2076 — what's the difference?

The HexArmor Helix 2076 is a cut-and-puncture A6 knit without the dorsal impact exoskeleton, so it is lighter and cheaper. The Rig Lizard 2095 adds the rated ANSI/ISEA 138 impact backing for tool-and-pipe work. Choose the Helix 2076 for pure cut/puncture; choose the 2095 when impact is part of the job. Read our HexArmor Helix 2076 review for that pick.

Are HexArmor Rig Lizard 2095 gloves good for mechanics?

They work well for heavy mechanical and rig-floor work where sharp edges and smash hazards coexist, thanks to the A6 cut plus level-2 impact. For lighter automotive work prioritizing dexterity, also weigh the field in our best cut-resistant gloves for mechanics guide.

What size HexArmor Rig Lizard 2095 should I order?

HexArmor sizes the 2095 across XS to XXL by numeric and letter size; the seamless knit should fit snug without bunching at the fingertips so the PU palm grips properly. If you are between sizes for tool work, size to your dominant hand. Browse the full cut-resistant gloves collection for the size spread.

Is the HexArmor Rig Lizard 2095 hi-vis?

Yes — the Thin Lizzie version uses a hi-vis blue-and-yellow color scheme so hands stay visible on the rig floor and in low light. That visibility is a deliberate safety feature for crews working around moving equipment, not just cosmetic.

How does the HexArmor Rig Lizard 2095 compare to a leather impact glove?

A leather impact glove (like the HexArmor Chrome SLT 4073) gives more palm abrasion life and a rugged feel but less fingertip dexterity and breathability. The PU-palm Rig Lizard 2095 trades some palm longevity for a thinner, more tactile glove. Pick by whether your work rewards feel or palm durability; see cut-resistant vs impact-resistant gloves.

Can the HexArmor Rig Lizard 2095 be used for glass and sheet-metal handling?

Its A6 cut shell handles many glass and sheet-metal edges, but dedicated glass-handling gloves are often chosen for grip and length. Compare options in our best cut-resistant gloves for glass handling guide before committing for a glass-heavy line.

Does the HexArmor Rig Lizard 2095 meet OSHA hand-protection requirements?

OSHA's hand-protection standard requires employers to select gloves from a documented hazard assessment rather than naming a product; a correctly chosen A6 cut, level-2 impact glove like the Rig Lizard 2095 satisfies it for combined cut-and-impact hazards. Match the glove to your assessed risks and document the selection. For broader context, see the cut-resistant gloves complete guide.

How long do HexArmor Rig Lizard 2095 gloves last?

Service life depends on the work — PU palms wear faster than leather under constant abrasion, so expect to retire them when the palm coating thins or the shell shows cut-through. Inspect before each shift and replace at the first sign of compromised cut or impact protection; a worn glove no longer carries its rated A6/level-2 performance.