Ergodyne Proflex 7001 Nitrile Coated Gloves Review

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The Ergodyne 7001 ProFlex Nitrile-Coated Work Gloves (ANSI A1, Abrasion 5) is a safety gloves from Ergodyne, listed on Amazon. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

Published July 16, 2026 · Last updated July 27, 2026

Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and category fit. We did not laboratory-test this glove.

As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure .

The Ergodyne 7001 ProFlex nitrile-coated glove is a lightweight, dexterity-first work glove built for high-volume handling, assembly and general maintenance. A foam-nitrile coating over the palm and fingertips delivers reliable dry and lightly oily grip while the breathable knit back keeps hands cool through long shifts. It carries an ANSI/ISEA 105 A1 cut rating and an abrasion level 5 , placing it among low-cut, high-tactility gloves rather than heavy cut-protection styles.

Where It Earns Its Slot

Where it earns its slot: Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and category fit. We did not laboratory-test this glove.. The sections below test that positioning against the documented configuration, not against wishful thinking.

Honest Limits

The ratings are task-specific and so are the limits: a cut level says nothing about chemical breakthrough, an abrasion score nothing about heat, and no glove rating survives the wrong size — a loose glove is a snag hazard and a tight one comes off. Match the marking to the assessed hazard, not to the biggest number.

Pros and Cons

Alternatives in the Same Lane

• SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
• MCR Safety PD6901 Predator Impact Gloves
• MCR Safety PD4900 Predator Impact Gloves
• MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
• MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
• MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
• MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
• MCR Safety PD4971 Predator Impact Gloves
• MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im

Hand Protection Guides

• Cut-Resistant Gloves Complete Guide
• Best Cut-Resistant Gloves
• Best Impact-Resistant Gloves
• Nitrile Gloves Complete Guide
• Best Mechanics Gloves

Browse by Category

• Cut-Resistant Gloves
• Impact-Resistant Gloves
• Nitrile Gloves
• Leather Work Gloves
• Chemical-Resistant Gloves
• Mechanics Gloves

Frequently Asked Questions

General questions about ratings, OSHA limits and fit are answered in the Cut-Resistant Gloves Complete Guide guide.

The Bottom Line

Rated 4.5/5 on documented spec, configuration, and value. The Ergodyne 7001 ProFlex Nitrile-Coated Work Gloves (ANSI A1, Abrasion 5) does the job its listing describes — the guides above tell you whether it's the right pick against the field.

Common questions

What does the Ergodyne 7001 ProFlex Nitrile-Coated Work Gloves (ANSI A1, A listing actually document?

Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and category fit. We did not laboratory-test this glove.…

What are the alternatives to the Ergodyne 7001 ProFlex Nitrile-Coated Work Gloves (ANSI A1, A?

The sibling safety gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.

Sources. Requirements referenced here come from OSHA 29 CFR 1910 and the NIOSH recommendations. Where a consensus standard governs, the ANSI document is named in the text.

Related reference

Related reading in this area: cut resistance glove levels explained: ansi/isea 105 a1 through a9, nitrile gloves: the complete buyer's guide, nitrile-coated vs pu-coated work gloves: which grip wins?, best cut resistant gloves for glass handling, nitrile vs vinyl gloves: cost, protection & best uses, and how to choose cut resistant gloves by ansi level.

Why trust WC Safety

WC Safety is an independent, affiliate-supported review site. It is not a retailer: it holds no inventory, takes no orders, and earns only from qualifying purchases through clearly marked links — which never changes what a product is rated to do. Standards language is taken from the regulation text directly, and ratings are reported as the manufacturer publishes them. We run no laboratory and perform no testing of our own. Where published sources disagree, we say so and plan on the conservative figure rather than the flattering one.

Our methodology

Figures come from the regulation and the published specification, in that order. Derated numbers are calculated, not estimated. Nothing here is presented as a measured result, because we measure nothing.

Researched and written by Steven Eaton, editor of WC Safety. Steven holds no safety certification and does not test products; this page compares what manufacturers and regulators publish, with the gaps in that record marked. Last reviewed August 2026.