Is the Ansell HyFlex 11-644 the right cut-resistant glove for light-duty industrial work?

Short answer: Yes — if your hazard is incidental cuts during general handling and you want all-day comfort, the Ansell HyFlex 11-644 is one of the easiest A2 knits to live in. Its light polyethylene liner keeps the hand cool and dexterous for assembly, packaging and warehouse work. It is the wrong pick if you face sharp blades, thin metal or oily grip — for those, move up to the A4 Ansell HyFlex 11-561 or a coated glove like the Ansell HyFlex 11-840.

Ansell HyFlex 11-644 Cut-Resistant Gloves Review (2026): Light-Duty ANSI A2 Mechanical Protection

The Ansell HyFlex 11-644 sits at the comfort end of WC Safety's cut-resistant glove lineup — a light, uncoated polyethylene knit rated ANSI/ISEA 105 A2 for light-duty mechanical protection. This review positions the 11-644 against its HyFlex siblings and the wider light-duty cut field, grounded in the ANSI/ISEA 105 cut standard and Ansell's published specifications. If you are still mapping cut levels to your tasks, start with our complete cut-resistant gloves guide and the A1–A9 cut levels explainer; for the full Ansell range, see our best Ansell HyFlex gloves guide.

Editorial verdict — 4.3/5. The Ansell HyFlex 11-644 is the all-day-comfort A2 pick: light polyethylene liner, real dexterity and launderable for reuse programs — at roughly $16 it earns its keep for general handling, but it is light-duty cut only and offers no grip coating or impact protection.

VIEW ON WC SAFETY → CHECK PRICE ON AMAZON →

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are accurate as of the date shown and are subject to change. Full affiliate disclosure.

→ Browse the cut-resistant gloves collection · Compare the line in our best Ansell HyFlex gloves guide

Who the Ansell HyFlex 11-644 is for

• Assembly and production operators handling deburred parts and components all shift.
• Warehouse and packaging crews needing light cut protection plus dexterity for taping, scanning and sorting.
• Light maintenance and inspection staff who find heavier A4–A5 gloves too stiff.
• Facilities running reusable-glove programs that launder and reissue to control cost.

Browse the full range in the cut-resistant gloves collection or the broader hand protection collection, and for lifting-focused tasks see material-handling gloves.

What the Ansell HyFlex 11-644 does well

All-day comfort and dexterity

The 11-644's headline strength is wearability. The light polyethylene knit and seamless 15-gauge build give a second-skin feel that keeps fingers nimble for fine handling, and the uncoated palm breathes far better than a dipped glove on a warm line. Workers who abandon stiffer cut gloves mid-shift tend to keep these on.

Right-sized A2 cut protection

For light-duty mechanical tasks, A2 is the correct tier — enough to blunt incidental edges and deburred metal without the bulk of a high-level glove. Over-gloving with an A5 where an A2 fits the hazard just costs comfort and money, a point we make in our how-to-choose cut gloves by ANSI level guide.

Launderable for reuse programs

Because the 11-644 is a knit, it launders and reissues, spreading its cost across many wears. For procurement teams stocking a glove closet, that lowers effective cost per use versus disposables.

Ansell consistency and fit

Ansell's sizing runs true across the HyFlex range, so a facility standardizing on the line can size workers once. That consistency is part of why the HyFlex family is a default spec in many plants.

Where the Ansell HyFlex 11-644 falls short

Light-duty cut only

A2 is the second-lowest cut level. For sharp blades, thin sheet metal or glass you need A4 or higher — the Ansell HyFlex 11-561 (A4) or a best A5 glove. Do not stretch the 11-644 past its rating.

No grip coating

The uncoated palm that makes the 11-644 breathe also means it offers little grip on oily or wet parts. For greasy work choose a coated HyFlex such as the Ansell HyFlex 11-840; the trade-offs are in our coated-glove guide.

No impact or puncture defense

This is a pure cut glove — no back-of-hand TPR and no needle-grade puncture resistance. For those hazards see impact-resistant gloves and needle-resistant gloves.

How the Ansell HyFlex 11-644 compares to its true competitive set

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are accurate as of the date shown and are subject to change. Full affiliate disclosure.

Ansell HyFlex 11-644 vs its HyFlex siblings

• Buy the Ansell HyFlex 11-644 if you want the lightest, coolest A2 knit for dry, dexterous handling.
• Buy the Ansell HyFlex 11-561 if edges are sharper and you need A4 with a PU grip palm.
• Buy the Ansell HyFlex 11-840 if grip on oily parts matters more than maximum cut.
• Buy the Ansell HyFlex 11-518 if you want a comparable light-duty knit alternative within the line.

Shop the HyFlex line on Amazon →11-51811-64411-56111-840

Pairing the Ansell HyFlex 11-644 in a glove program

Few facilities run a single glove. The 11-644 covers light dry handling; pair it with a coated glove for oily tasks and an A4+ option for sharper work so operators can grab the right tool. Common pairings from the line include the grip-focused Ansell HyFlex 11-840, the higher-cut Ansell HyFlex 11-561, and for cut-plus-puncture stations the HexArmor Helix 2076. The mixed-material 11-531 and 11-542 round out the cut-and-heat 11-542 and foam-nitrile 11-531 stations.

Pair the 11-644 with grip or impact protection on Amazon →HyFlex 11-840 (grip)HyFlex 11-561 (A4)HexArmor Helix 2076 (A6)

Category context: where light-duty A2 fits

Cut gloves span A1 (minimal) to A9 (extreme blade exposure). A2 like the 11-644 is the everyday light-duty tier — above bare-hand and A1 nuisance protection, below the A4–A6 range used for fabrication and the A7–A9 range for heavy blade work. Uncoated knits trade grip for breathability; coated gloves invert that. Knowing where your task sits on the ANSI/ISEA 105 scale prevents both under- and over-gloving. The European EN 388 standard measures cut differently, so cross-check the printed codes when comparing imports.

Total cost of ownership

At about $16 a pair the 11-644 is mid-range for a name-brand A2 knit, but its real cost story is reuse. Because it launders, a single pair can replace many disposables in a reissue program, dropping effective cost per shift well below the sticker price. Budget for periodic replacement once the yarn shows wear or the cut performance degrades, and standardize sizing across the HyFlex line to simplify reordering. For lifting and handling stations, the material-handling gloves collection pairs naturally with an A2 cut spec.

Final verdict on the Ansell HyFlex 11-644

4.3/5. Buy the Ansell HyFlex 11-644 if you need comfortable, dexterous, launderable light-duty cut protection for dry general handling — it is one of the easiest A2 gloves to wear all day. Buy the A4 Ansell HyFlex 11-561 instead if edges are sharper, or the coated Ansell HyFlex 11-840 if you need grip on oily parts. For the full field, see our best cut-resistant gloves guide.

VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

Ansell HyFlex 11-644: frequently asked questions

Is the Ansell HyFlex 11-644 enough cut protection for general industrial handling?

Yes for light-duty mechanical work. The Ansell HyFlex 11-644 carries an ANSI/ISEA 105 A2 cut rating, which covers the everyday nicks and edges of general assembly, parts handling, packaging and warehouse work. It is not a glove for sheet-metal fabrication, glass handling or knife work — for those you want an A4 or higher like the Ansell HyFlex 11-561 (A4) or a best A5 cut-resistant glove. Match the level to a documented hazard assessment, as explained in our guide to choosing cut gloves by ANSI level.

What does the ANSI A2 cut rating on the Ansell HyFlex 11-644 actually mean?

ANSI/ISEA 105 A2 means the glove withstands roughly 500–999 grams of cutting load on the standardized TDM-100 test before the blade cuts through. It is the second-lowest of the nine cut levels (A1–A9). A2 is the right zone for light edges, deburred metal and general material handling — not for aggressive blades. Our cut levels explainer breaks down the full A1–A9 gram scale.

Ansell HyFlex 11-644 vs 11-561 — which should I buy?

Buy the Ansell HyFlex 11-644 (A2) when comfort and dexterity for light handling matter more than maximum cut protection, and buy the Ansell HyFlex 11-561 (A4) when the task involves sharper edges or thin metal. The 11-644 is lighter and a touch more breathable; the 11-561 trades some of that feel for two extra cut levels. See the head-to-head in our A4 vs A5 comparison for where the lines fall.

What is the Ansell HyFlex 11-644 liner made of?

The 11-644 uses a high-performance polyethylene (HPPE) knit liner, the same family of engineered yarn used across the HyFlex cut range. Polyethylene delivers cut resistance at a low weight, which is why the glove feels light and stays cool compared with heavier coated gloves. It is uncoated on the 11-644, prioritizing breathability and tactile feel for dry handling. Compare liner and coating choices in our coated-glove guide.

Is the Ansell HyFlex 11-644 good for all-day wear?

All-day comfort is the 11-644's strongest selling point. The light polyethylene knit and seamless 15-gauge construction reduce hand fatigue over a full shift, and the uncoated palm breathes better than dipped gloves. Workers who find heavier A4–A5 gloves stiff or sweaty tend to prefer the 11-644 for repetitive assembly and handling. For a fuller rundown of the line, see our best Ansell HyFlex gloves guide.

Does the Ansell HyFlex 11-644 have grip coating for oily parts?

No — the 11-644 is an uncoated knit, so it is built for dry handling rather than oily or wet grip. If you handle greasy components, step up to a nitrile- or PU-coated HyFlex such as the Ansell HyFlex 11-840 foam-nitrile glove, which adds wet-grip without giving up much dexterity. For the coating trade-offs, read nitrile-coated vs PU-coated work gloves.

What jobs is the Ansell HyFlex 11-644 best for?

General assembly, parts handling, packaging, warehousing, light maintenance and inspection where the hazard is incidental contact with edges rather than blades. It suits operators who need cut protection without the bulk of a heavy glove. For sharper hazards, our best cut-resistant gloves guide ranks higher-level options, and the best cut gloves for mechanics guide covers oily automotive work.

Is the Ansell HyFlex 11-644 machine washable?

Yes — like most knit HyFlex gloves it can be laundered to extend service life, which lowers cost per use for facilities that reissue gloves. Wash in warm water and air dry; avoid high-heat drying that can damage the polyethylene yarn. Launderability is one reason knit A2 gloves like the 11-644 work well in reusable-glove programs. Browse the full range in the cut-resistant gloves collection.

How does the Ansell HyFlex 11-644 compare to a coated A2 glove like the PIP MaxiFlex Cut?

The PIP MaxiFlex Cut 34-8743 is also A2 but adds a nitrile micro-foam palm coating for grip on slightly oily or wet parts, while the 11-644 stays uncoated for maximum breathability. Choose the 11-644 for dry, light handling where coolness matters; choose the MaxiFlex Cut when you need a little grip. Both sit in the light-duty A2 tier covered in our complete cut-resistant gloves guide.

What does the Ansell HyFlex 11-644 NOT protect against?

It does not protect against high-level cut hazards (sharp blades, thin sheet metal, glass), impact, punctures from needles, heat or chemicals. A2 is a light-duty cut rating only. For impact protection look at ANSI/ISEA 138 impact-rated gloves, and for needle hazards see our best needle-resistant gloves. Never assume a cut glove covers other hazards — run the OSHA 1910.138 hazard assessment.

Is the Ansell HyFlex 11-644 good value at around $16?

For a name-brand A2 knit, the roughly $16 price is mid-range and reasonable given Ansell's consistency and the glove's launderability. Generic A2 knits sell for less, but the 11-644's fit and durability typically justify the premium in a reissue program. Compare it against the rest of the line in our Ansell HyFlex lineup guide before buying in bulk.

How do I size the Ansell HyFlex 11-644?

HyFlex knit gloves are stretch-fit and run fairly true; most users order their normal glove size and get a snug, second-skin feel. If you are between sizes for repetitive fine work, size down for tighter dexterity; for swelling over a long shift, size up. Use our glove size chart to measure, and browse spreads in the cut-resistant gloves collection.

Can I use the Ansell HyFlex 11-644 for food handling?

The 11-644 is a general industrial glove and is not marketed as a food-grade product, so for direct food contact choose a food-safe cut glove instead — see our best food-grade cut-resistant gloves. For dry, non-food light handling the 11-644 is a strong everyday choice. Always verify the specific certification on the box for your application.

Ansell HyFlex 11-644 vs an impact-resistant glove — which do I need?

They solve different problems. The 11-644 protects against cuts only (A2); an impact glove adds molded TPR across the back of the hand to absorb pinch and strike hazards. If your work involves both edges and impact — common in mechanical and oilfield tasks — you need an impact glove, not the 11-644. Our cut vs impact gloves comparison explains the split, and best impact-resistant gloves lists options.

How does ANSI A2 relate to the EN 388 European cut rating on the Ansell HyFlex 11-644?

ANSI/ISEA 105 (used in the US) and EN 388 (used in Europe) are different test methods, so the numbers do not convert one-to-one. A glove can carry both ratings, and Ansell typically prints an EN 388 four- or five-digit code alongside the ANSI letter. For light-duty handling the A2 figure is the one US buyers should anchor on. Our EN 388 standard explainer decodes the European code.

Where does the Ansell HyFlex 11-644 sit in WC Safety's cut-glove lineup?

It is the comfort-first, light-duty A2 pick — the glove to reach for when dexterity and all-day wear beat maximum protection. Above it sit the A4 Ansell HyFlex 11-561 and the abrasion-focused Ansell HyFlex 11-840. Browse the whole category in the cut-resistant gloves collection or start with our cut-resistant gloves buyer's guide.