🔍 Click to zoom
Wells Lamont HydraHyde Leather Palm Work Gloves — Water-Resistant
$14.96
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Wells Lamont HydraHyde, a water-resistant leather-palm glove for wet outdoor work. Editorial assessment by Steven Eaton, WC Safety editor, based on published Wells L...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Wells Lamont HydraHyde, a water-resistant leather-palm glove for wet outdoor work.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Wells Lamont specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Wells Lamont specifications and category fit. We did not laboratory-test this product.
The Wells Lamont HydraHyde uses the brand's water-resistant leather treatment so this leather-palm glove stays flexible after wet work instead of drying stiff — the classic failure of untreated leather. It is the pick for outdoor work that meets morning dew, wet lumber, and weather: the same leather feel, with far less cardboard-stiffness afterward. That means a glove that keeps its fit and comfort through the wet-dry cycles that ruin ordinary leather.
CHECK PRICE ON AMAZON → SHOP LEATHER WORK GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Wells Lamont HydraHyde beats untreated leather in the wet
Everyone who works outdoors knows the ritual: leather gloves get soaked, dry hard as a board, and never fit right again. HydraHyde is Wells Lamont's answer — a water-resistant treatment that keeps the leather palm supple after it gets wet, so the glove sheds dew and rain and comes back to shape instead of cracking. You keep the grip and abrasion protection of leather where you hold tools, without the wet-work penalty. It is the glove for landscaping, lumber, and construction in changeable weather. As leather work gloves go, this is the water-resistant leather-palm pick, and the best leather work gloves guide and mechanics gloves guide cover matching leather and treatment to the weather.
Safety first: HydraHyde is water-resistant, not waterproof — it sheds damp and stays supple, but it is not an immersion glove, and it is a general-purpose leather-palm glove: not rated to an ANSI cut level, so not a cut glove, and not rated against a chemical splash hazard or high heat. For cut hazards use a cut-rated glove, for chemicals a chemical-resistant glove, and for hot work a welding glove. Match the glove to your measured hazard with the glove hazard guide.
What the Wells Lamont HydraHyde listing documents
From the published specs: a leather palm for grip and abrasion; the HydraHyde water-resistant leather treatment; leather that stays flexible after wet work; positioning for dew, wet lumber, and weather. These are true water resistant leather gloves and genuine leather palm work gloves — supple hydrahyde gloves for wet outdoor work.
How the HydraHyde compares to other work gloves
For another water-resistant option in unlined cowhide, the Kinco 398P Hydroflector; for a value dry-work suede, the Kinco 50; and for a warm lined glove, the Kinco 1927KW pigskin. For a canvas-and-leather jobsite glove, the Carhartt A518; for a dry cowhide standard, the Wells Lamont Cowhide; and where cut protection matters, the Mechanix Durahide F9-360. The cut-resistant gloves guide covers levels.
Choosing the right glove for your hazard
Water resistance is one axis; protection is another. For blade cuts, the cut-resistant collection and complete cut-glove guide; for impact, the impact gloves guide and the MCR FF2931 ForceFlex; for heat, the welding gloves collection; and the full hand protection collection plus mechanics gloves span every category.
Where it fits by job and crew orders
The water-resistant HydraHyde suits landscaping, construction, lumber handling, and outdoor crews working through dew, rain, and wet material — compare leathers with the leather gloves guide. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the Wells Lamont HydraHyde?
A leather-palm work glove treated with Wells Lamont's HydraHyde water-resistant finish. It stays flexible after wet work instead of drying stiff - the classic failure of untreated leather - so it holds up for outdoor work that meets dew, wet lumber, and weather.
What does HydraHyde do?
HydraHyde is Wells Lamont's water-resistant leather treatment. It helps the leather shed water and, importantly, stay supple after it gets wet and dries, avoiding the stiff, cardboard feel untreated leather develops.
Is it waterproof?
No - it is water-resistant, not waterproof. It sheds and tolerates moisture for wet-weather work, but it is not an immersion glove for sustained submersion; for that, use a waterproof or chemical glove designed for liquids.
What is a leather-palm glove?
A leather-palm glove uses leather where you grip - the palm and fingers - often with a fabric back for breathability and cost. It gives leather's abrasion protection and grip at the working surface where it matters most.
What work is it for?
Outdoor and general work that meets moisture: landscaping in the dew, handling wet lumber, construction and yard work in changeable weather where untreated leather would soak through and stiffen.
Is it cut-resistant?
No - it is a general-purpose leather-palm work glove. It is not rated to an ANSI cut level unless the listing states one; for blade hazards, use a cut-rated glove instead.
Is it chemical- or heat-rated?
No - it is a leather-palm work glove for abrasion and general handling. It is not rated against chemicals or for high heat; use a chemical-resistant or welding glove for those hazards.
Why does treated leather matter?
Untreated leather soaks up water and dries hard, stiff, and cracked, ruining the fit and feel. HydraHyde's water resistance keeps the leather supple through wet-dry cycles, so the glove lasts longer and stays comfortable.
What sizes does it come in?
Size and color options for this listing are shown on the linked Amazon product page. A work glove should fit snugly enough to control tools without binding at the fingers.
Will the water resistance wear off?
Treatments can diminish with heavy use and washing. Let the glove air-dry away from direct heat, and re-treat with a leather water repellent if the water resistance fades over time.
How do I care for it?
Let it air-dry away from direct heat if it gets soaked, and keep it clean of grit. Retire a leather glove once it cracks, wears through, or the seams fail - a compromised glove no longer protects.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed Wells Lamont HydraHyde Leather Palm Work Gloves review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
Wells Lamont
Model / SKU
—
Product Type
Leather Work Gloves
Price
$14.96 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Wells Lamont HydraHyde?
A leather-palm work glove treated with Wells Lamont's HydraHyde water-resistant finish. It stays flexible after wet work instead of drying stiff - the classic failure of untreated leather - so it holds up for outdoor work that meets dew, wet lumber, and weather.
What does HydraHyde do?
HydraHyde is Wells Lamont's water-resistant leather treatment. It helps the leather shed water and, importantly, stay supple after it gets wet and dries, avoiding the stiff, cardboard feel untreated leather develops.
Is it waterproof?
No - it is water-resistant, not waterproof. It sheds and tolerates moisture for wet-weather work, but it is not an immersion glove for sustained submersion; for that, use a waterproof or chemical glove designed for liquids.
What is a leather-palm glove?
A leather-palm glove uses leather where you grip - the palm and fingers - often with a fabric back for breathability and cost. It gives leather's abrasion protection and grip at the working surface where it matters most.
What work is it for?
Outdoor and general work that meets moisture: landscaping in the dew, handling wet lumber, construction and yard work in changeable weather where untreated leather would soak through and stiffen.
Is it cut-resistant?
No - it is a general-purpose leather-palm work glove. It is not rated to an ANSI cut level unless the listing states one; for blade hazards, use a cut-rated glove instead.
Is it chemical- or heat-rated?
No - it is a leather-palm work glove for abrasion and general handling. It is not rated against chemicals or for high heat; use a chemical-resistant or welding glove for those hazards.
Why does treated leather matter?
Untreated leather soaks up water and dries hard, stiff, and cracked, ruining the fit and feel. HydraHyde's water resistance keeps the leather supple through wet-dry cycles, so the glove lasts longer and stays comfortable.
What sizes does it come in?
Size and color options for this listing are shown on the linked Amazon product page. A work glove should fit snugly enough to control tools without binding at the fingers.
Will the water resistance wear off?
Treatments can diminish with heavy use and washing. Let the glove air-dry away from direct heat, and re-treat with a leather water repellent if the water resistance fades over time.
How do I care for it?
Let it air-dry away from direct heat if it gets soaked, and keep it clean of grit. Retire a leather glove once it cracks, wears through, or the seams fail - a compromised glove no longer protects.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.