Uvex Stealth Uvextreme Anti-Fog Safety Goggles — S3960C
$15.90
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Uvex Stealth S3960C, a Uvextreme anti-fog sealed goggle with a neoprene headband. Editorial assessment by Steven Eaton, WC Safety editor, based on published Honeywel...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Uvex Stealth S3960C, a Uvextreme anti-fog sealed goggle with a neoprene headband.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Honeywell Uvex specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Honeywell Uvex specifications and category fit. We did not laboratory-test this product.
The Uvex Stealth S3960C is a Honeywell ANSI Z87.1 high-impact safety goggle with a Uvextreme factory anti-fog lens, a gray body, and a neoprene headband for a comfortable sealed fit against dust and debris. It blocks 99.9% of UV and meets OSHA 29 CFR 1910.133. It is the comfort-focused sealed goggle for long shifts, pairing a proven anti-fog lens with a soft headband that holds its seal without digging in.
CHECK PRICE ON AMAZON → SHOP SAFETY GOGGLES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Uvex Stealth is built for all-day comfort
A goggle you can wear for hours is a goggle you actually keep on. The Uvex Stealth pairs Honeywell's Uvextreme factory anti-fog lens — tuned to hold clarity through heat, humidity, and sweat — with a soft neoprene headband that keeps a secure seal without the bite of a thin strap. Sealed all the way around, it blocks dust and debris from every angle, carries the ANSI Z87.1 high-impact certification, and blocks 99.9% of UV. As safety goggles go, this is the comfort-and-anti-fog pick, and the anti-fog guide and glasses-vs-goggles guide explain when a sealed lens beats open glasses. It is the goggle that earns a full shift on your face.
Safety first: the Stealth seals against dust and debris, but the listing does not state an ANSI Z87.1 D3 rating against a chemical splash hazard — so for dedicated chemical splash work choose a D3-marked indirect-vent goggle like the Kleenguard Monogoggle, and add a face shield for heavy splash. Note the listing shows conflicting lens-tint details, so confirm the exact tint before you order. It is an impact-and-dust goggle, not a shaded welding goggle. Confirm requirements with the OSHA 1910.133 guide.
What the Uvex Stealth listing documents
From the published specs: ANSI Z87.1 high-impact certification; a Uvextreme factory anti-fog lens; a gray body with a neoprene headband; and 99.9% UV blocking. These are true anti-fog safety goggles and genuine sealed safety goggles — comfortable neoprene headband goggles for dust and debris.
How the Uvex Stealth compares to other goggles
For a D3 chemical-splash goggle, the Kleenguard Monogoggle or Honeywell Uvex chem goggle; for another anti-fog goggle, the clear DeWalt DPG84; for a clear dual-mold goggle, the Klein Dual Mold; and for the tinted Uvextreme, the Uvex Stealth Teal. The Z87.1 standard guide and lab eyewear guide help match markings to the task.
Choosing the right eye protection for your hazard
Impact, splash, and light are different hazards. For everyday impact eyewear, the safety glasses collection and safety glasses guide; for full-face coverage, the face shields guide; for shaded hot work, the welding goggles collection; and the full eye protection collection plus the when-do-you-need-eyewear guide help build the right kit.
Where it fits by job and crew orders
The comfortable Stealth suits construction, manufacturing, and long-shift work where anti-fog clarity and a soft seal matter — compare eyewear with the eyewear buyer's guide and the manufacturing eyewear guide. Comfort is a safety feature in disguise: a goggle that seals without pinching is one a worker keeps on for the whole shift rather than lifting to relieve pressure. Preserve the Uvextreme coating with gentle cleaning, confirm the lens tint you want before ordering, and replace the goggle once the lens hazes or the headband loses its stretch. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the Uvex Stealth S3960C?
A Honeywell Uvex ANSI Z87.1 high-impact safety goggle with a Uvextreme factory anti-fog lens, a gray body, and a neoprene headband for a comfortable sealed fit. It blocks 99.9% of UV and meets OSHA 29 CFR 1910.133.
What is the Uvextreme anti-fog lens?
Uvextreme is Honeywell's factory anti-fog coating, designed to hold clarity in humid, high-temperature, and perspiration-prone conditions. It is the Stealth's headline feature for hot, sweaty work where lenses fog.
What lens tint does it come in?
The listing shows conflicting details on tint - the name indicates clear while the specs mention a smoke/gray tint - so confirm the exact lens tint on the product page before buying. Clear suits indoor work; smoke reduces glare outdoors.
What is the neoprene headband for?
A neoprene headband is soft, stretchy, and comfortable for long wear, holding the goggle in a secure seal without the bite of a thin elastic strap. It is a comfort upgrade for all-day use.
Is it rated for chemical splash?
The listing does not state an ANSI Z87.1 D3 chemical-splash rating. It is a sealed dust-and-impact goggle; for dedicated chemical splash work, choose a D3-marked indirect-vent goggle and add a face shield.
How is a goggle different from safety glasses?
Safety glasses protect the front and sides but leave gaps; a goggle seals around the eye socket, blocking dust and debris from any direction. The Stealth is a sealed goggle for full-perimeter coverage.
What work is it for?
General construction, manufacturing, and jobsite tasks with flying dust and debris, especially where the anti-fog lens and comfortable headband matter for long shifts.
Is it OSHA compliant?
It meets the requirements of OSHA 29 CFR 1910.133 for eye and face protection and carries the ANSI Z87.1 high-impact certification for impact resistance.
Does it fit over prescription glasses?
The Stealth is a standard sealed goggle; check the listing for over-the-glasses (OTG) fit if you wear prescription eyewear, or choose an OTG-specific goggle for a comfortable fit over frames.
How long does the anti-fog last?
Factory anti-fog coatings wear with time and cleaning. Rinse gently, avoid abrasive wipes, and reapply an anti-fog product if fogging returns; replace the goggle once the lens is scratched or hazed.
When should I replace it?
Replace a goggle when the lens is scratched or hazed enough to obscure vision, when the seal or headband degrades, or after any significant impact - a compromised goggle no longer protects.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed Uvex Stealth Uvextreme Anti-Fog Safety Goggles review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
Honeywell
Model / SKU
S3960C
Product Type
Safety Goggles
Price
$15.90 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Uvex Stealth S3960C?
A Honeywell Uvex ANSI Z87.1 high-impact safety goggle with a Uvextreme factory anti-fog lens, a gray body, and a neoprene headband for a comfortable sealed fit. It blocks 99.9% of UV and meets OSHA 29 CFR 1910.133.
What is the Uvextreme anti-fog lens?
Uvextreme is Honeywell's factory anti-fog coating, designed to hold clarity in humid, high-temperature, and perspiration-prone conditions. It is the Stealth's headline feature for hot, sweaty work where lenses fog.
What lens tint does it come in?
The listing shows conflicting details on tint - the name indicates clear while the specs mention a smoke/gray tint - so confirm the exact lens tint on the product page before buying. Clear suits indoor work; smoke reduces glare outdoors.
What is the neoprene headband for?
A neoprene headband is soft, stretchy, and comfortable for long wear, holding the goggle in a secure seal without the bite of a thin elastic strap. It is a comfort upgrade for all-day use.
Is it rated for chemical splash?
The listing does not state an ANSI Z87.1 D3 chemical-splash rating. It is a sealed dust-and-impact goggle; for dedicated chemical splash work, choose a D3-marked indirect-vent goggle and add a face shield.
How is a goggle different from safety glasses?
Safety glasses protect the front and sides but leave gaps; a goggle seals around the eye socket, blocking dust and debris from any direction. The Stealth is a sealed goggle for full-perimeter coverage.
What work is it for?
General construction, manufacturing, and jobsite tasks with flying dust and debris, especially where the anti-fog lens and comfortable headband matter for long shifts.
Is it OSHA compliant?
It meets the requirements of OSHA 29 CFR 1910.133 for eye and face protection and carries the ANSI Z87.1 high-impact certification for impact resistance.
Does it fit over prescription glasses?
The Stealth is a standard sealed goggle; check the listing for over-the-glasses (OTG) fit if you wear prescription eyewear, or choose an OTG-specific goggle for a comfortable fit over frames.
How long does the anti-fog last?
Factory anti-fog coatings wear with time and cleaning. Rinse gently, avoid abrasive wipes, and reapply an anti-fog product if fogging returns; replace the goggle once the lens is scratched or hazed.
When should I replace it?
Replace a goggle when the lens is scratched or hazed enough to obscure vision, when the seal or headband degrades, or after any significant impact - a compromised goggle no longer protects.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.