What ANSI/ISEA 107 class is the Sesafety B0CBZ7WBBT Class 3 Hi-Vis Pullover Hoodie — Black Trim?

This is an ANSI/ISEA 107 Class 3 garment, providing the highest level of high-visibility protection. Class 3 is required for workers exposed to traffic over 50 mph or in nighttime or low-visibility conditions. It includes coverage of the arms (vest alone cannot meet Class 3 without sleeves).

When does OSHA require high-visibility clothing?

OSHA does not have a single general standard for high-visibility clothing. OSHA 29 CFR 1926.201 requires flaggers on construction sites to wear high-visibility apparel. The MUTCD (Manual on Uniform Traffic Control Devices) requires ANSI/ISEA 107 Class 2 or higher for workers in active traffic control zones on federal-funded roads. Many state DOTs and FHWA standards specify Class 3.

How should high-visibility garments be washed?

Machine wash in warm water. Do not use bleach or fabric softener — these degrade retroreflective tape and fluorescent material performance. Tumble dry on low or hang to dry. Inspect retroreflective tape for peeling, cracking, or reduced reflectivity. Replace garments when the fluorescent color fades significantly or retroreflective tape no longer reflects adequately.

What sizes are available for the Sesafety B0CBZ7WBBT Class 3 Hi-Vis Pullover Hoodie — Black Trim?

Sesafety high-visibility garments are typically available in S through 5XL. Fit is important — a garment that is too large may not meet the required retroreflective coverage area. Ensure the vest or jacket can be worn comfortably over winter clothing or cold weather layers if needed for cold-weather applications.

What is the difference between Class 2 and Class 3 hi-vis?

Class 2 provides 775+ sq. in. of background material and 201+ sq. in. retroreflective tape — adequate for moderate traffic environments up to 50 mph. Class 3 provides 1,240+ sq. in. of background and 310+ sq. in. of retroreflective tape, with sleeve coverage — required for high-speed roads, nighttime work, and high-exposure situations. When in doubt, use Class 3.

How long does high-visibility clothing last?

Most manufacturers rate hi-vis garments for 25–40 washes before the fluorescent material fades below standard. Retroreflective tape typically lasts 50–75 wash cycles. Use an ANSI/ISEA 107 photometric test card to check retroreflectivity. Replace garments when visual performance is degraded — faded hi-vis may not meet the standard.

Sesafety B0CBZ7WBBT Class 3 Hi-Vis Pullover Hoodie — Black Trim

🔍 Click to zoom

View on Amazon

Sesafety B0CBZ7WBBT Class 3 Hi-Vis Pullover Hoodie — Black Trim

Name: Sesafety B0CBZ7WBBT Class 3 Hi-Vis Pullover Hoodie — Black Trim
Brand: Sesafety
SKU: B0CBZ7WBBT
Price: 34.99 USD
Availability: InStock

Sesafety SKU: B0CBZ7WBBT Hi-Vis Jacket GTIN: 810131534479

★ ★ ★ ★ ★ 4.8 (1073 Amazon ratings)

$34.99 $49.99

Final price set by Amazon · may vary

Sesafety B0CBZ7WBBT is a class 3 hi-vis pullover hoodie — black trim designed for use in professional and industrial environments. ANSI/ISEA 107-2020 Type R Class 3 certified maximum pedestrian worker visibility stan...

Key Features

ANSI/ISEA 107-2020 Type R Class 3 certified maximum pedestrian worker visibility standard
Pullover construction no zipper for simplified wear and reduced mechanical failure points
Black accent panels and trim for a professional, modern dual-tone appearance
Fluorescent yellow-green background meets Class 3 minimum area (1,240 sq in)
Retroreflective tape meets Class 3 310 sq in minimum for night and low-light visibility
Integrated hood for weather protection on exposed outdoor sites

Check Price on Amazon

🔒 Amazon Associate · You pay the same price · We earn a small commission

Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.

Curated SelectionExpert-chosen safety gear

Independently ReviewedUnbiased assessments — no manufacturer input

Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.

0810131534479 Black-203 Jackets needs-review sesafety ST2033-L

Overview

ANSI/ISEA 107-2020 Type R Class 3 certified maximum pedestrian worker visibility standard

Pullover construction no zipper for simplified wear and reduced mechanical failure points

Black accent panels and trim for a professional, modern dual-tone appearance

Key features

ANSI/ISEA 107. 2020 Type R Class 3 certified maximum pedestrian worker visibility standard
Pullover construction no zipper for simplified wear and reduced mechanical failure points
Black accent panels and trim for a professional, modern dual-tone appearance
Fluorescent yellow. green background meets Class 3 minimum area (1,240 sq in)
Retroreflective tape meets Class 3 310 sq in minimum for night and low-light visibility
Integrated hood for weather protection on exposed outdoor sites

Who it's for

This product is suited for industrial and commercial buyers seeking reliable performance in demanding work environments. It is appropriate for use in maintenance, manufacturing, and facilities management applications.

Specifications

Brand	Sesafety
Model number	B0CBZ7WBBT

Frequently asked questions

What is the warranty on this product?

Warranty terms vary by manufacturer. Refer to the product packaging and manufacturer documentation included with your purchase for warranty details.

Is this product suitable for commercial or industrial use?

Yes, this product is designed for use in commercial and industrial environments. Review the Specifications above to confirm it meets your application requirements.

How is this product shipped?

This product is fulfilled through Amazon. Shipping speed and method depend on current Amazon availability. Check the current listing for delivery options.

Check current pricing and availability on Amazon.

As an Amazon Associate, we earn from qualifying purchases. Pricing and availability shown on Amazon at time of click.

Brand / Vendor

Sesafety

Model / SKU

B0CBZ7WBBT

Product Type

Hi-Vis Jacket

Condition

New

MPN

B0CBZ7WBBT