🔍 Click to zoom
Rapicca 16-Inch MIG Welding Gloves — 662F Fireproof Leather, Black
$19.99
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Rapicca 16-Inch MIG glove, the long-cuff black variant tuned for wire-feed feel. Editorial assessment by Steven Eaton, WC Safety editor, based on published Rapicca s...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Rapicca 16-Inch MIG glove, the long-cuff black variant tuned for wire-feed feel.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Rapicca specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Rapicca specifications and category fit. We did not laboratory-test this product.
The Rapicca 16-Inch MIG glove (black) trades a little of the 932°F blue glove's insulation for more hand feel — its listing rates it to 662°F, aimed at wire-feed work rather than forge tending. It keeps the same extra-long forearm coverage as its blue sibling, tuned for MIG's balance of dexterity and spatter protection, and it protects your hands and forearms from heat and spatter — not your eyes, which need a welding helmet with the correct shade.
CHECK PRICE ON AMAZON → SHOP WELDING GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Rapicca 16-Inch MIG balances reach and feel
Long-cuff heat gloves usually trade away dexterity, which is a problem when you are running a MIG gun for hours. The black Rapicca answers that by tuning its 16-inch gauntlet for wire-feed work: it gives up some of the blue glove's insulation — its listing rates it to 662°F rather than 932°F — in exchange for more hand feel, while keeping the same extra-long forearm coverage. It is the long-cuff option for welders who want reach without a stiff, heavily insulated glove. As welding gloves go, this is the dexterity-tuned long-cuff MIG pick, and the best welding gloves guide and leather glove guide cover matching coverage and feel to the process.
Safety first: the 662°F figure is the listing's stated rating — real heat exposure depends on contact time and distance, and this MIG variant has less insulation than the blue 932°F glove, so use the blue one for sustained forge heat. A welding gauntlet protects your hands and forearms, not your eyes: arc-eye protection requires a welding helmet with the correct shade, covered in the welding helmets guide, plus safety glasses underneath. It is a leather heat glove, not a chemical glove, so it is not rated against a chemical splash hazard. Match the glove to your process.
What the Rapicca 16-Inch MIG listing documents
From the published specs: a 16-inch extra-long gauntlet covering half the forearm; a heat rating listed at 662°F; less insulation, more hand feel than the blue 932°F glove; tuned for MIG wire-feed work. These are true 16 inch mig welding gloves and genuine extra long mig gloves — dexterity-tuned rapicca welding gloves for long-cuff MIG.
How the Rapicca 16-Inch MIG compares to other welding gloves
Match the glove to the process: the blue Rapicca 932F adds insulation for forge and furnace heat; for production MIG and stick, the Miller 271889, Lincoln K2979, Lincoln K3806 DynaMIG, Black Stallion cowhide, insulated Caiman deerskin, or premium Tillman 50 gauntlet; for thin-feel TIG, the Tillman 1328, Tillman 1338, Lincoln K2981, or Caiman goat-grain TIG.
Choosing the right welding PPE
Gloves are one layer. Protect your eyes and face with the right shade from the welding goggles guide and face-shield guide, and browse the leather work gloves collection and full hand protection collection for every category.
Where it fits by job and crew orders
The Rapicca 16-Inch MIG suits MIG welders who want long forearm coverage with more hand feel — production, fabrication, and hobby wire-feed work — compared against the blue forge glove in the welding gloves guide. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Reading a cut level, and why the letter matters
Industrial hand protection is rated to ANSI/ISEA 105, which scores cut resistance A1 to A9 by the gram load required to cut through at a fixed distance — and the scale is not linear. A9 withstands roughly nine times the load of A1, and the jump from A4 to A5 is far larger than A1 to A2. The European equivalent, EN 388, uses letters A–F on a different test, so an EN rating does not map cleanly onto an ANSI level.
ANSI/ISEA 105 also scores abrasion, puncture and, where relevant, impact — which is a separate rating from cut and is the one that matters for back-of-hand protection. OSHA 1910.138 requires hand protection selected for the specific hazard, which is why a cut level alone is not a specification.
⚠ Cut resistance is not cut proof, and no glove rating covers a moving blade drawn under load. Ratings also degrade with wear, contamination and laundering.
Frequently asked questions
What is the Rapicca 16-Inch MIG glove?
The black 16-inch Rapicca variant tuned for MIG - it trades a little of the 932°F blue glove's insulation for more hand feel, and its listing rates it to 662°F. It keeps the same extra-long forearm coverage, aimed at wire-feed work rather than forge tending.
How is it different from the blue 932F glove?
The blue Rapicca is rated by its listing to 932°F with more insulation for forge and furnace work; this black MIG version is rated to 662°F and trades insulation for more hand feel. Choose the black for MIG dexterity and the blue for maximum heat and forge work.
What does the 662F rating mean?
The listing rates the glove to 662°F, indicating the heat level it is built to tolerate. Treat it as the manufacturer's stated rating and match it to your task; real heat exposure depends on contact time and distance, not just a peak number.
What is the 16-inch length for?
The 16-inch gauntlet covers the hand and roughly half the forearm, protecting far more arm than a standard MIG glove. That reach guards against spatter and radiant heat during out-of-position and overhead MIG welds.
What welding is it for?
MIG (wire-feed) welding where you want long forearm coverage with more hand feel than a heavily insulated glove. It balances dexterity and spatter protection for production and hobby MIG work.
Is it arc-eye protection?
No - this is a hand-and-forearm protection glove for heat and spatter. Arc-eye protection requires a welding helmet with the correct shade; the glove protects your hands, not your eyes or face.
Is it chemical- or cut-resistant?
No - it is a leather heat glove for MIG welding. It is not rated against chemicals or for a specific ANSI cut level unless the listing states it; use a chemical or cut glove for those hazards.
Does it have good dexterity for MIG?
More than the blue 932F glove - it gives up some insulation for hand feel, which suits running a MIG gun. For the finest feel, a thin goatskin TIG glove is better, but that trades away the heat coverage.
Can I use it for forge or furnace work?
The blue 932F glove is the better pick for forge and furnace tending because of its higher listed rating and insulation. The black 662F MIG glove is tuned for wire-feed welding rather than sustained high-heat handling.
What sizes does it come in?
Size options for this listing are shown on the linked Amazon product page. A long gauntlet should fit the hand well while the cuff stays roomy enough to slide over a sleeve.
How do I care for it?
Keep it dry, store it away from heat and sunlight, and let it air-dry if it gets damp. Retire a welding glove once the leather cracks, burns through, or the seams fail - a compromised glove no longer protects.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed Rapicca 16-Inch MIG Welding Gloves review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
RAPICCA
Model / SKU
—
Product Type
Welding Gloves
Price
$19.99 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Rapicca 16-Inch MIG glove?
The black 16-inch Rapicca variant tuned for MIG - it trades a little of the 932°F blue glove's insulation for more hand feel, and its listing rates it to 662°F. It keeps the same extra-long forearm coverage, aimed at wire-feed work rather than forge tending.
How is it different from the blue 932F glove?
The blue Rapicca is rated by its listing to 932°F with more insulation for forge and furnace work; this black MIG version is rated to 662°F and trades insulation for more hand feel. Choose the black for MIG dexterity and the blue for maximum heat and forge work.
What does the 662F rating mean?
The listing rates the glove to 662°F, indicating the heat level it is built to tolerate. Treat it as the manufacturer's stated rating and match it to your task; real heat exposure depends on contact time and distance, not just a peak number.
What is the 16-inch length for?
The 16-inch gauntlet covers the hand and roughly half the forearm, protecting far more arm than a standard MIG glove. That reach guards against spatter and radiant heat during out-of-position and overhead MIG welds.
What welding is it for?
MIG (wire-feed) welding where you want long forearm coverage with more hand feel than a heavily insulated glove. It balances dexterity and spatter protection for production and hobby MIG work.
Is it arc-eye protection?
No - this is a hand-and-forearm protection glove for heat and spatter. Arc-eye protection requires a welding helmet with the correct shade; the glove protects your hands, not your eyes or face.
Is it chemical- or cut-resistant?
No - it is a leather heat glove for MIG welding. It is not rated against chemicals or for a specific ANSI cut level unless the listing states it; use a chemical or cut glove for those hazards.
Does it have good dexterity for MIG?
More than the blue 932F glove - it gives up some insulation for hand feel, which suits running a MIG gun. For the finest feel, a thin goatskin TIG glove is better, but that trades away the heat coverage.
Can I use it for forge or furnace work?
The blue 932F glove is the better pick for forge and furnace tending because of its higher listed rating and insulation. The black 662F MIG glove is tuned for wire-feed welding rather than sustained high-heat handling.
What sizes does it come in?
Size options for this listing are shown on the linked Amazon product page. A long gauntlet should fit the hand well while the cuff stays roomy enough to slide over a sleeve.
How do I care for it?
Keep it dry, store it away from heat and sunlight, and let it air-dry if it gets damp. Retire a welding glove once the leather cracks, burns through, or the seams fail - a compromised glove no longer protects.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.