🔍 Click to zoom
Tillman 1328 Top Grain Goatskin TIG Welding Gloves — Entry Price
$15.95
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the Tillman 1328, the supple goatskin TIG glove that welders reach for first. Editorial assessment by Steven Eaton, WC Safety editor, based on published Tillman specific...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the Tillman 1328, the supple goatskin TIG glove that welders reach for first.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Tillman specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Tillman specifications and category fit. We did not laboratory-test this product.
The Tillman 1328 is a top-grain goatskin TIG welding glove — goatskin's high lanolin content keeps the leather supple, which is why it dominates among TIG welders who need rod control through the glove. Tillman's welding-glove pedigree at an entry price makes the 1328 the default first TIG glove, and as thin goatskin it is matched to low-spatter TIG — it protects your hands from TIG-level heat, not your eyes, which need a welding helmet with the correct shade.
CHECK PRICE ON AMAZON → SHOP WELDING GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Tillman 1328 is the default first TIG glove
Ask a shop what to buy for a first TIG glove and this is often the answer. The reason is simple: goatskin runs high in lanolin, so it stays soft and supple where a stiffer hide would blunt your feel on the filler rod — and TIG lives or dies on that feel. Pair that with Tillman's welding-glove pedigree and an entry price, and you get a glove that welders reach for without overthinking it. As welding gloves go, this is the accessible goatskin TIG pick, and the best welding gloves guide and leather glove guide cover matching hide and feel to the process.
Safety first: a TIG glove is thin for feel, so it is matched to low-spatter TIG only — do not use it for high-amperage stick or heavy plate, where you need a thicker insulated glove to avoid burns. It protects your hands, not your eyes: arc-eye protection requires a welding helmet with the correct shade, covered in the welding helmets guide, plus safety glasses underneath. It is a leather heat glove, not a chemical glove, so it is not rated against a chemical splash hazard. Match the glove to your process.
What the Tillman 1328 listing documents
From the published specs: a top-grain goatskin shell; high lanolin content that keeps the leather supple; rod-control feel favored by TIG welders; Tillman pedigree at an entry price; Large sizing (model 1328). These are true goatskin tig welding gloves and genuine tig welding gloves — accessible tillman welding gloves for precision work.
How the Tillman 1328 compares to other welding gloves
Match the glove to the process: for a longer TIG cuff, the Tillman 1338 adds forearm coverage; other thin-feel TIG options include the grain-leather Lincoln K2981 and the multi-task Caiman goat-grain TIG; for hotter MIG and stick, step up to the Miller 271889, Lincoln K2979, Lincoln K3806 DynaMIG, Black Stallion cowhide, insulated Caiman deerskin, or premium Tillman 50 gauntlet; for long cuffs, the Rapicca 16-inch.
Choosing the right welding PPE
Gloves are one layer. Protect your eyes and face with the right shade from the welding goggles guide and face-shield guide, and browse the leather work gloves collection and full hand protection collection for every category.
Where it fits by job and crew orders
The 1328 suits TIG welders on stainless, aluminum, and precision carbon steel who want supple goatskin feel at an accessible price — many buy it as a first TIG glove and add a longer-cuff or MIG glove later, compared in the welding gloves guide. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Reading a cut level, and why the letter matters
Industrial hand protection is rated to ANSI/ISEA 105, which scores cut resistance A1 to A9 by the gram load required to cut through at a fixed distance — and the scale is not linear. A9 withstands roughly nine times the load of A1, and the jump from A4 to A5 is far larger than A1 to A2. The European equivalent, EN 388, uses letters A–F on a different test, so an EN rating does not map cleanly onto an ANSI level.
ANSI/ISEA 105 also scores abrasion, puncture and, where relevant, impact — which is a separate rating from cut and is the one that matters for back-of-hand protection. OSHA 1910.138 requires hand protection selected for the specific hazard, which is why a cut level alone is not a specification.
⚠ Cut resistance is not cut proof, and no glove rating covers a moving blade drawn under load. Ratings also degrade with wear, contamination and laundering.
Frequently asked questions
What is the Tillman 1328?
A top-grain goatskin TIG welding glove. Goatskin's high lanolin content keeps the leather supple, which is why it dominates among TIG welders who need rod control through the glove. Tillman's welding-glove pedigree at an entry price makes it a common first TIG glove.
Why goatskin for TIG?
Goatskin is naturally high in lanolin, which keeps it soft and supple so you keep the fingertip feel TIG demands when you feed filler rod by hand. That softness plus abrasion resistance is why goatskin dominates TIG gloves.
How does it compare to the Tillman 1338?
Both the 1328 and 1338 wear 4-inch split cowhide cuffs; the 1338 adds a glide patch and a reinforced straight thumb for gun-drag wear, where the 1328 uses a wing thumb.
Can I use it for MIG or stick?
Not ideally - it is thin goatskin matched to low-spatter TIG. MIG and stick throw more spatter and radiant heat, which call for a thicker cowhide glove or an insulated stick glove. Match the glove to the process.
Is it arc-eye protection?
No - this is a hand-protection glove. Arc-eye protection requires a welding helmet with the correct shade; the glove protects your hands, not your eyes or face.
Is it chemical- or cut-resistant?
No - it is a leather welding glove for TIG-level heat. It is not rated against chemicals or for a specific ANSI cut level unless the listing states it; use a chemical or cut glove for those hazards.
Is it a good first TIG glove?
Yes - the combination of Tillman's welding pedigree, supple goatskin feel, and an entry price is exactly why it is a common default for welders buying their first dedicated TIG glove.
What metals is it for?
The precision, low-spatter work TIG is used for - stainless steel, aluminum, and fine carbon steel - where feel on the filler rod matters more than heavy heat armor.
What sizes does it come in?
This listing is Large (model 1328); check the linked Amazon product page for other sizes. A TIG glove should fit close for maximum feel without binding at the fingers.
Will it protect against heavy heat?
No - it is built for TIG's lower heat, not high-amperage stick or heavy plate. For those, choose a thick cowhide or insulated glove; a thin TIG glove on hot work risks burns.
How do I care for it?
Keep it dry, store it away from heat and sunlight, and let it air-dry if it gets damp. Retire a welding glove once the leather cracks, burns through, or the seams fail - a compromised glove no longer protects.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed Tillman 1328 Top Grain Goatskin TIG Welding Gloves review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
Tillman
Model / SKU
1328
Product Type
Welding Gloves
Price
$15.95 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Tillman 1328?
A top-grain goatskin TIG welding glove. Goatskin's high lanolin content keeps the leather supple, which is why it dominates among TIG welders who need rod control through the glove. Tillman's welding-glove pedigree at an entry price makes it a common first TIG glove.
Why goatskin for TIG?
Goatskin is naturally high in lanolin, which keeps it soft and supple so you keep the fingertip feel TIG demands when you feed filler rod by hand. That softness plus abrasion resistance is why goatskin dominates TIG gloves.
How does it compare to the Tillman 1338?
The 1328 is the wing-thumb entry goatskin TIG glove; the 1338 adds a glide patch and reinforced straight thumb (both carry 4-inch split cowhide cuffs). Choose the 1328 for a minimal cuff and low price, and the 1338 when your forearm gets near the torch or hot fixtures.
Can I use it for MIG or stick?
Not ideally - it is thin goatskin matched to low-spatter TIG. MIG and stick throw more spatter and radiant heat, which call for a thicker cowhide glove or an insulated stick glove. Match the glove to the process.
Is it arc-eye protection?
No - this is a hand-protection glove. Arc-eye protection requires a welding helmet with the correct shade; the glove protects your hands, not your eyes or face.
Is it chemical- or cut-resistant?
No - it is a leather welding glove for TIG-level heat. It is not rated against chemicals or for a specific ANSI cut level unless the listing states it; use a chemical or cut glove for those hazards.
Is it a good first TIG glove?
Yes - the combination of Tillman's welding pedigree, supple goatskin feel, and an entry price is exactly why it is a common default for welders buying their first dedicated TIG glove.
What metals is it for?
The precision, low-spatter work TIG is used for - stainless steel, aluminum, and fine carbon steel - where feel on the filler rod matters more than heavy heat armor.
What sizes does it come in?
This listing is Large (model 1328); check the linked Amazon product page for other sizes. A TIG glove should fit close for maximum feel without binding at the fingers.
Will it protect against heavy heat?
No - it is built for TIG's lower heat, not high-amperage stick or heavy plate. For those, choose a thick cowhide or insulated glove; a thin TIG glove on hot work risks burns.
How do I care for it?
Keep it dry, store it away from heat and sunlight, and let it air-dry if it gets damp. Retire a welding glove once the leather cracks, burns through, or the seams fail - a compromised glove no longer protects.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.