Skip to content
Industrial Safety Equipment, PPE Guides & Reviews
Industrial Safety Equipment, PPE Guides & Reviews
Home β€Ί Fall Protection Lanyards β€Ί Petzl L071AA00 ASAP'SORBER 20cm Energy Absorber...

Petzl L071AA00 ASAP'SORBER 20cm Energy Absorber Lanyard

Petzl Lanyard

EDITORIAL REVIEW β€” Petzl L071AA00 ASAP'SORBER 20cm Energy Absorber Lanyard Assessed on the standards the product is actually certified to and on how the format fits a working shift, by Steven Eaton, WC Safety editor....

Check Price on Amazon

πŸ”’ Amazon Associate Β· You pay the same price Β· We earn a small commission

Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant β€” verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW β€” Petzl L071AA00 ASAP'SORBER 20cm Energy Absorber Lanyard

Assessed on the standards the product is actually certified to and on how the format fits a working shift, by Steven Eaton, WC Safety editor.

Disclosures & editorial standards
WC Safety participates in the Amazon Services LLC Associates Program. Outbound Amazon links are affiliate links. We accept no manufacturer payment, sponsorship, or product samples. This content is not medical, legal, or regulatory advice. Safety equipment selection is governed by applicable OSHA standards and your facility's safety program.

Petzl L071AA00 ASAP'SORBER 20cm Energy Absorber Lanyard

A harness on its own arrests nothing. A personal fall arrest system under 29 CFR 1926.502 is the harness, the connector, the anchorage and the clearance below, and it is only as good as the weakest of the four. Verify the anchorage rating and the total fall clearance before the first tie-off, not after.

Key Feature: ASAP'SORBER connects the user's harness to the ASAP or ASAP LOCK mobile fall arrester, allowing the worker to work at a safe distance from the rope while protecting the rope from contact with the structure during progress along the rope

The Petzl L071AA00 ASAP'SORBER 20cm Energy Absorber Lanyard is a ANSI Z359.13, EN 355-compliant energy absorber lanyard designed for use with the Petzl ASAP or ASAP LOCK mobile fall arrester from Petzl β€” a French manufacturer and global leader in rope access, work-at-height, and vertical rescue equipment. Petzl products are used on telecom towers, wind turbines, bridges, offshore platforms, and construction sites where demanding vertical environments require the highest-quality fall protection hardware.

Model L071AA00 attaches between the user's harness dorsal D-ring and the ASAP or ASAP LOCK mobile fall arrester, providing a working distance from the rope and absorbing energy in the event the fall arrester triggers. It is NOT a standalone lanyard β€” it requires a compatible Petzl ASAP or ASAP LOCK device.

Specifications β€” L071AA00

Specification Value
Model / SKU L071AA00
Brand / Series Petzl ASAP'SORBER
Type Single-Leg Lanyard
Length / Configuration 20 cm (energy absorber)
Anchor Connector ASAP / ASAP LOCK mobile fall arrester
Harness Connector Dorsal D-ring of harness
Weight Capacity Up to 310 lb (140 kg)
Standards ANSI Z359.13, EN 355
Amazon ASIN B00GCC3LEW

Why Petzl for Work-at-Height?

Petzl has engineered rope access and work-at-height equipment since 1975. The ASAP'SORBER series is designed with input from professional rope access technicians, industrial climbers, and rescue professionals β€” resulting in hardware that balances ergonomics, weight, and performance in a way that purely industrial-focused manufacturers often miss. Petzl products carry CE marking under EU PPE Regulation 2016/425 and are independently tested to both US ANSI and European EN standards.

Shop Petzl Lanyards

Frequently Asked Questions

Q: What is the difference between the ASAP'SORBER and the ABSORBICA-Y?

The ASAP'SORBER is a specialized energy absorber lanyard designed to be used only with the Petzl ASAP or ASAP LOCK mobile fall arrester β€” it is not a standalone fall arrest system. The ABSORBICA-Y is a complete self-contained shock absorbing lanyard system (twin-leg Y-shape with built-in energy absorber) that connects directly between the harness and an anchor, similar to a traditional fall arrest lanyard but with Petzl's premium MGO connector hardware.

Q: Does Petzl equipment meet OSHA requirements for US construction?

Yes, for ANSI-certified Petzl products. OSHA 29 CFR 1926.502(d) requires fall arrest systems to meet performance criteria (maximum arresting force, fall distance limits) β€” ANSI Z359.13-certified Petzl lanyards meet these criteria. OSHA does not require products to be specifically ANSI-certified by name, but meeting ANSI Z359.13 provides a documented compliance baseline that satisfies OSHA performance requirements.

Q: What is an MGO connector and how does it differ from a snap hook?

MGO stands for "Moschettone Grillo Ovale" (Italian for oval screwgate carabiner with large gate opening). Petzl's MGO connectors on the ABSORBICA-Y series feature a wider gate opening than standard snap hooks (typically 1.5–2 in. vs. 0.5–1 in. for snap hooks), allowing faster connection to anchor rings, scaffold clamps, and structural members β€” especially when wearing gloves. MGO connectors use a screw-lock or twist-lock mechanism meeting the self-locking requirement of OSHA 1926.502(d)(2)(vi).

Q: Can the ABSORBICA-Y be used for 100% tie-off?

Yes. The ABSORBICA-Y twin-leg design allows one leg to remain clipped to the current anchor while the other clips to the next anchor, maintaining continuous fall protection during movement between anchor points. This meets the 100% tie-off requirement specified in many safety plans for construction, bridge work, and tower climbing under OSHA 1926.502(d) and ANSI Z359.13.

Q: How should Petzl lanyards be stored and maintained?

Store Petzl lanyards in a cool, dry, UV-protected environment away from chemicals, sharp edges, and heat sources above 140Β°F. Inspect before each use for: web damage (cuts, fraying, chemical discoloration), connector function (gate action, lock engagement), energy absorber integrity (look for deployment indicators or broken stitching), and legible labels. Clean with mild soap and water β€” never use solvents. Follow Petzl's inspection checklist in the product technical notice.

Related Products & Guides

Frequently asked questions

How much clearance does a shock-absorbing lanyard need?

More than most people assume. You must add free fall distance, the deceleration distance as the absorber deploys, harness stretch, the worker height below the D-ring, and a safety margin.

What anchorage strength does OSHA require?

For personal fall arrest, anchorages must support at least 5,000 pounds per employee attached, or be designed and installed with a safety factor of at least two under supervision of a qualified person.

Can I reuse a lanyard after a fall?

No. Once a fall has been arrested, the lanyard, energy absorber and harness are removed from service permanently, even if they look undamaged.

What is the difference between a lanyard and an SRL?

A lanyard is a fixed length with an energy absorber; a self-retracting lifeline pays out and locks like a seatbelt, which shortens free fall and reduces required clearance.

How often must fall protection be inspected?

By the user before each use, and by a competent person at intervals set by the manufacturer and your program - commonly at least annually, documented.

Where do the specifications on this page come from?

They are taken from the manufacturer's published listing. WC Safety does not laboratory-test products, and nothing is claimed here that the manufacturer does not state.

Does WC Safety sell this product?

No. WC Safety is an independent review site and an Amazon Associate. Purchases happen on Amazon, and we earn a commission on qualifying purchases at no extra cost to you.

The buying criteria for this category are laid out in best fall protection kits, best fall protection lanyards, best horizontal lifelines, best roof anchors, best safety harness.

Neighbouring categories worth ruling in or out first: fall protection, fall protection anchor points, fall protection kits.

Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.

Related standards and selection guidance: best self retracting lifelines, best tool lanyards, best vertical lifelines rope grabs, cable vs web srl.

Directly comparable options are grouped in full body harnesses, harness accessories.

[{"q":"How was this page put together?","a":"From the manufacturer's published specification for this model and from the text of the standards it cites. WC Safety is an independent review site and does not perform laboratory testing; where a figure is not published, the page says so instead of estimating one."},{"q":"Does WC Safety sell this product?","a":"No. WC Safety is an affiliate review site and holds no inventory. Outbound Amazon links are affiliate links that earn a commission at no cost to you, and they do not affect what the page says."},{"q":"Is PPE alone enough to control this hazard?","a":"No. Under OSHA 29 CFR 1910.132 the employer must first try to eliminate or engineer out the hazard, then control what is left administratively. Personal protective equipment covers the residual risk and is the last layer, not the plan."},{"q":"How do I know the item I receive is the one described here?","a":"Match the manufacturer's model or part number, not the product name. Vendors run several variants under one family name, and the part number is the only field that identifies a specific certified configuration."},{"q":"What should I check before ordering a size or variant?","a":"Check that the variant you select carries the rating you need. On multi-variant listings the rated option is often one choice among several, so the rating shown in the title may not apply to every size or colour in the dropdown."},{"q":"How do I check I am looking at the current version of this product?","a":"Compare the model or part number on the listing against the manufacturer's current catalogue page. Vendors revise hardware without renaming it, and a listing photo often lags the revision by a year or more. The part number changes when the specification does; the product name frequently does not."},{"q":"What should I do if the listing and the manufacturer's page disagree?","a":"Treat the manufacturer's own current documentation as authoritative and the marketplace listing as a copy of it that may be out of date. Where the disagreement is about a safety rating, do not proceed on the more favourable number - confirm it with the manufacturer before relying on it."},{"q":"How often is this page updated?","a":"Whenever the manufacturer's published specification changes, whenever a standard this page cites is revised, and on a fixed review cycle in between. The page states what the sources say at the time of review; it is not a live feed of the seller's listing."},{"q":"What does the editorial assessment on this page mean?","a":"It is WC Safety's own opinion, formed from the published specification and the standards the product is certified to. It is first-party editorial judgement, not an average of customer ratings, and no customer-review data is aggregated anywhere on this page."},{"q":"How should I compare this against the alternatives?","a":"Compare on the rating and the certification first, then on fit, comfort and serviceability - in that order. Two items that meet the same standard are equivalent on protection, so the remaining differences are about whether the equipment gets worn or used correctly, which is where most real-world failures actually come from."},{"q":"What if the item that arrives is not what the listing described?","a":"Raise it with the seller through the marketplace's own returns process - WC Safety is not the seller and cannot process a return, an exchange or a refund. Check the part number on the item against the listing before use, particularly where a rating matters."},{"q":"Is this suitable for commercial or industrial use?","a":"That depends on the duty cycle and the hazard assessment for your site, not on the product alone. Consumer-grade and industrial-grade versions of the same item often share a name and differ in the rating printed on them, so check the marking rather than the marketing."}]
Brand / Vendor
Petzl
Model / SKU
β€”
Product Type
Lanyard
Availability
Check current availability on Amazon
🏷️
No Paid Placements
Every product earns its place on documented safety credentials and specifications β€” never advertising spend.
🏭
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
πŸ”¬
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
ℹ️
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews

Customer Reviews

Share Your Experience

Write a Review

Select a rating
βœ“

Thank you for your review!

Your submission has been received and will be published after verification.

Petzl L071AA00 ASAP'SORBER 20cm Energy Absorber Lanyard