P100 Replacement Filters Compatible with GVS Elipse Respirator SPR321 β 2-Pack
EDITORIAL REVIEW β P100 Replacement Filters Compatible with GVS Elipse Respirator SPR321 β 2-Pack Assessed on the standards the product is actually certified to and on how the format fits a working shift, by Steven E...
Check Price on Amazonπ Amazon Associate Β· You pay the same price Β· We earn a small commission
Assessed on the standards the product is actually certified to and on how the format fits a working shift, by Steven Eaton, WC Safety editor.
WC Safety participates in the Amazon Services LLC Associates Program. Outbound Amazon links are affiliate links. We accept no manufacturer payment, sponsorship, or product samples. This content is not medical, legal, or regulatory advice. Safety equipment selection is governed by applicable OSHA standards and your facility's safety program.
p100 replacement filters compatible with gvs elipse β what the listing actually specifies
P100 Replacement Filters for GVS Elipse Respirator SPR321 β 2-Pack
An air-purifying respirator filters air, it does not supply any. Under 29 CFR 1910.134 no air-purifying respirator may be worn in an atmosphere that is IDLH or oxygen-deficient (below 19.5% oxygen). Those conditions require a supplied-air respirator or an SCBA, and no filter or cartridge rating changes that.
These P100 replacement filters are designed to be compatible with the GVS Elipse half-face respirator (SPR321), fitting both the Small/Medium and Medium/Large Elipse facepiece sizes with a secure snap-in connection. P100 certifies 99.97% minimum filtration efficiency against all solid and liquid particulate aerosols β the highest particulate efficiency rating NIOSH assigns to APR filters. The 2-pack format provides two replacement filters, covering one complete filter change on one facepiece (one filter per port). Suitable for woodworking, sanding, construction, painting, grinding, and other fine-particulate environments where high-efficiency particulate protection is the primary requirement. Browse the full respirator filters and cartridges catalog at WC Safety for OEM and compatible filter options.
Read the full P100 Replacement Filters Compatible with GVS Elipse Respirator SPR321 review β
Compatibility: GVS Elipse SPR321 (S/M and M/L) | ASIN: B0GT936XRT | Pack: 2 filters (1 pair)
Note: This is a third-party replacement product. It is described as compatible with GVS Elipse SPR321 respirators. For OEM GVS replacement filters, refer to GVS part numbers on the GVS website. Always verify filter-facepiece compatibility before use in a compliance respiratory protection program β OSHA 1910.134 requires manufacturer-confirmed facepiece and filter system compatibility.
Protection Profile
| Hazard | Filter Status | Notes |
|---|---|---|
| Non-oil solid particulates (dust, fume, fibers) | P100 β 99.97% min efficiency | Wood dust, sanding debris, silica, drywall, concrete, metal grinding dust |
| Non-oil liquid aerosol mists | P100 β 99.97% min efficiency | Water-based paint mist, non-oil spray aerosol |
| Oil-based aerosols | Verify with manufacturer | Amazon listing indicates non-oil-based particulate focus β confirm oil aerosol rating with manufacturer before use in oil mist environments |
| Gases and vapors | Not covered | Particulate only β for gas/vapor protection use a combination cartridge; see respirator filters and cartridges |
Key Features
| GVS Elipse SPR321 Compatibility | Designed to fit the GVS Elipse SPR321 half-face respirator. Covers both size variants β Small/Medium and Medium/Large Elipse facepieces β with a snap-in connection that seats securely against the facepiece filter ports. One 2-pack equips one facepiece for a complete filter change. |
| High-Efficiency P100 Filtration | P100 rated filters provide 99.97% minimum filtration efficiency β the highest NIOSH particulate efficiency level. Suitable for woodworking dust, sanding debris, drywall and plaster dust, concrete particulate, and metal grinding dust where high-efficiency filtration is the primary protection requirement. |
| Quick Snap-In Installation | The snap-in connection design allows fast, tool-free filter replacement. Quick installation reduces downtime when changing filters during a work shift. The secure snap ensures the filter is seated consistently, reducing the risk of partial installation that could create an unintended bypass path around the filter media. |
| 2-Pack Value Format | Two filters per pack β one complete filter change at per pair β provides a cost-effective restocking option for programs where GVS Elipse users need regular filter replacement. At this price point per pair it supports higher-frequency scheduled replacement programs in dusty environments without significant cost per change. |
Common Applications
- Woodworking and carpentry β fine wood dust, sawdust, sanding particles; P100 provides high-efficiency capture of fine respirable wood dust fractions
- Sanding and surface prep β drywall sanding, wood finishing, paint sanding; high-volume dust generation where efficient filtration matters for sustained work
- Construction and demo β concrete grinding, masonry, drywall installation; compatible with OSHA silica standard minimum filter requirements (N95 or better)
- Painting (aerosol/mist) β water-based paint mist and overspray; P100 captures liquid aerosol droplets effectively (confirm vapor protection is not needed for solvent-based paints)
- Grinding and metalwork β angle grinding, metal cutting, abrasive work generating fine metallic particulate
- General DIY and trade work β cost-effective replacement filter for GVS Elipse users who perform varied dusty tasks across construction and renovation
Filter Replacement and Maintenance
Replace filters when breathing resistance increases noticeably during inhalation, when the filter surface is heavily loaded with visible debris, when filters are physically damaged, or when they become wetted by liquid (wetting compromises filter media performance). For sustained dusty work, inspect filters after each shift. In high-load environments (heavy sanding, concrete grinding) daily replacement may be appropriate. Always replace both filters simultaneously. After filter replacement, perform a user seal check per OSHA 1910.134 Appendix B-1 before entering the work area.
OSHA 1910.134 requires a written respiratory protection program including filter maintenance and replacement procedures for compliance programs. For occasional or DIY use, follow manufacturer guidance and replace filters when breathing becomes noticeably more difficult. Browse respirator filters and cartridges at WC Safety for OEM and compatible filter options.
Frequently Asked Questions
Are these OEM GVS filters or aftermarket?
Do these filters fit both S/M and M/L GVS Elipse sizes?
Can these be used for sanding and woodworking?
Do these filters protect against spray paint vapors?
How often should I replace the filters?
What is the difference between P100 and N95 for woodworking?
Frequently asked questions
What protection factor does a half mask provide?
OSHA assigns half mask air-purifying respirators an assigned protection factor of 10, meaning they are suitable up to ten times the occupational exposure limit when properly fitted.
How do I know when to change cartridges?
Use a change-out schedule based on objective data - manufacturer software, published breakthrough data or workplace monitoring. Odor and taste are unreliable and unacceptable as the sole trigger.
Can I use the same cartridge for dust and fumes?
Only if it is rated for both. Particulate filters capture solids and aerosols; gas and vapor cartridges use sorbent chemistry. Combination cartridges do both, and are marked accordingly.
Does OSHA require fit testing?
For tight-fitting respirators used under a required respiratory protection program, 1910.134 requires a medical evaluation first, fit testing before initial use, and fit testing at least annually thereafter.
Can I wear a respirator with facial hair?
Not a tight-fitting one. Hair crossing the sealing surface prevents a seal and the respirator will not deliver its rated protection. Loose-fitting PAPRs are the usual alternative.
What is a user seal check?
A quick positive and negative pressure check performed every time the respirator is donned. It confirms the respirator is seated - it does not replace fit testing.
Where do the specifications on this page come from?
They are taken from the manufacturer's published listing. WC Safety does not laboratory-test products, and nothing is claimed here that the manufacturer does not state.
Does WC Safety sell this product?
No. WC Safety is an independent review site and an Amazon Associate. Purchases happen on Amazon, and we earn a commission on qualifying purchases at no extra cost to you.
The buying criteria for this category are laid out in 3m 2091 vs 2097 filter, 3m 2091 vs honeywell north 7580p100, 3m 6000 vs 6500 respirator.
Neighbouring categories worth ruling in or out first: 3m 6000 series full face mask respirator, 3m 60921 vs 60923 vs 60926 respirator cartridges, 3m 7800 series full face mask respirator.
Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.
These cover the questions this page does not: 3m 6000 vs 6500 vs 7500 series half mask respirator compared, 3m 6001 vs 6003 cartridge, 3m 6003 vs honeywell north 7583p100l, 3m 60921 vs 60923 cartridge.
Directly comparable options are grouped in 3m disposable respirators, 3m full face mask respirators.
[{"q":"What does the P100 rating mean?","a":"Under 42 CFR 84 the letter and the number answer different questions. The letter is oil resistance - this one is oil proof. The number is filter efficiency against the most-penetrating 0.3 micron particle size, so 100 means 99.97% efficiency."},{"q":"Is a P100 better than an N95 for my job?","a":"It filters more efficiently, but under OSHA 1910.134 Table 1 every filtering facepiece carries the same assigned protection factor of 10. Moving up the filter scale changes what passes THROUGH the filter, not what leaks around the face seal - and the seal is the limit."},{"q":"What protection factor can I plan on?","a":"Ten. OSHA 1910.134 Table 1 assigns an APF of 10 to every filtering facepiece respirator regardless of whether it is rated 95, 99 or 100, so the maximum use concentration is ten times the exposure limit. If you need better than that, the answer is a different class of respirator, not a better disposable."},{"q":"Does it protect against gases, vapours or solvents?","a":"No. A particulate filter does nothing about gases or vapours. Those need a chemical cartridge on a half-mask or full-face facepiece, and a nuisance-level organic-vapour layer on a disposable is a comfort feature, not a rated filter."},{"q":"What does an exhalation valve change, and what does it not?","a":"A valve lowers breathing resistance and heat on exhale, which matters over a full shift. It does NOT raise the protection the wearer receives, and it provides no source control - a valved respirator vents the wearer's unfiltered breath, so where the point is to protect other people or a sterile field the unvalved version is the correct choice. Whether a given model has one is on its own listing."},{"q":"Do I need a fit test before using it?","a":"For occupational use, yes. 29 CFR 1910.134(f) requires a fit test before first use and at least annually after that, on the specific make, model and size that will be worn - a different size is a different respirator as far as the seal is concerned. Separately, Appendix B-1 requires a user seal check on every donning."},{"q":"Does facial hair stop it working?","a":"Yes. Hair crossing the sealing surface prevents a seal, and 1910.134 requires the seal area to be clean-shaven on any tight-fitting respirator. No strap tension compensates for it."},{"q":"How long can one be worn before it is discarded?","a":"Discard it when breathing resistance has risen noticeably, when the facepiece is soiled, damaged or deformed, when the straps have lost tension, or when a seal check can no longer be passed. Straps and the nose foam usually fail before the filter loads up."},{"q":"Can it be washed or reused between shifts?","a":"No. Washing destroys the filter media and the seal. A disposable filtering facepiece is discarded, not cleaned."},{"q":"What is the difference between a respirator, a surgical N95 and a surgical mask?","a":"A NIOSH-approved respirator is tested for filtration and fit and carries an assigned protection factor. A SURGICAL N95 is both NIOSH-approved and FDA-cleared for fluid resistance, so it does both jobs. A plain surgical or cloth mask is neither - no protection factor, no NIOSH approval. The approval is printed on the device; read it there rather than inferring it from the shape."},{"q":"Can it be used in a confined space or an unknown atmosphere?","a":"No. No air-purifying respirator may be used in an IDLH or oxygen-deficient atmosphere under 1910.134. Those conditions require supplied air or an SCBA, and no filter rating changes that."},{"q":"How should it be stored between uses?","a":"Clean, dry and uncrushed, away from contaminated air. A respirator stored loose in a toolbox or a pocket deforms, and a deformed facepiece will not pass a seal check even if the filter is untouched."}]Customer Reviews
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.