MCR Law OG1 OTG Safety Glasses β ANSI Z87.1+ Over-the-Glasses, Anti-Fog
EDITORIAL REVIEW: 4.3/5 β WC Safety Review of the MCR Law OG1 OTG, the entry-level over-the-glasses safety glass with anti-fog on both tints. Editorial assessment by Steven Eaton, WC Safety editor, based on publishe...
Check Price on Amazonπ Amazon Associate Β· You pay the same price Β· We earn a small commission
Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this product.
The MCR Safety Law OG1 OTG is the simplest answer to the eyeglass-wearer's problem: an ANSI/ISEA Z87.1+ over-the-glasses frame that fits over most standard prescription eyeglasses, in two variants β Clear and Gray, both with UV Anti-Fog. The widened Law frame and extended temples clear your Rx frame underneath, so there's no removing PPE to read a label and no prescription safety-lens order.
CHECK PRICE ON AMAZON β SHOP OTG SAFETY GLASSES β
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the MCR Law OG1 OTG is the simple over-the-glasses pick
Eyeglass wearers on a jobsite face a bad choice without OTG: prescription safety lenses cost money and wait time, and contacts aren't for everyone. The Law OG1 removes the choice β Z87.1+ impact protection worn straight over the glasses you already have, with anti-fog on both tints so it stays on your face instead of your forehead. It's the value tier of MCR's OTG line, and for a lot of workers that's exactly enough. Our full OG1 OTG review rates it 4.3/5, and the safety glasses buyer's guide covers when OTG beats prescription lenses.
Safety first: the OG1 OTG is impact-and-debris protection, not a sealed goggle β it is not rated against a chemical splash hazard, fine airborne dust, or vapor, which require sealed OTG goggles or a face shield per your hazard assessment. OTG fit is critical: verify it seats and closes over your specific prescription frame, since a frame too large to fit leaves gaps that defeat the protection. Choose eyewear against measured hazards using the when-do-you-need-safety-glasses guide.
What the listing documents
From the published specs: ANSI/ISEA Z87.1+ high-impact rating; an over-the-glasses (OTG) Law frame with a widened cavity and extended temple arms that fit over most prescription frames; polycarbonate lenses; two variants β Clear and Gray, both with UV Anti-Fog coating; model OG110AF. As mcr safety law eyewear, the OG1 is the entry over the glasses safety glasses option, and with anti-fog standard it's a straightforward otg safety glasses anti fog choice.
Choosing between the two OG1 variants
It's a simple split: Clear with UV Anti-Fog for indoor work and Gray with UV Anti-Fog for outdoor glare over your clear prescription lenses. The clear-vs-smoke lens guide covers the tint decision, and since OTG frames fog more, the anti-fog guide and anti-fog collection explain why both variants ship coated. Compare the wider OTG field in the over-the-glasses collection, including the Uvex Astro OTG.
OG1 vs the upgrade, and where MCR fits
Within MCR's OTG line, the OG1 is the entry option and the Klondike OG2 OTG is the upgrade β larger frame, hi-vis options, and MAX6/Dual Coat coatings. If you don't need those, the OG1 covers the OTG basics. MCR's standard-fit glasses run from the economy Klondike KD7 and simplified KD5 to the premium KD1, all in the broader MCR Safety glasses collection; the best safety glasses 2026 roundup places them against other brands.
Where it fits by wearer and crew orders
OTG suits eyeglass-wearing crews and visitor programs; for prescription wearers weighing fit, the women's fit guide and small-face guide cover smaller Rx frames underneath. Where the hazard exceeds impact β splash, dust, vapor β step to a sealed OTG goggle from the safety goggles collection or the broader eye protection collection. For a fuller comparison of clear indoor lenses, the clear-lens collection covers standard-fit alternatives. For crew orders, quantity purchasing runs through a free Amazon Business account β volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Reading the Z87 marking, and what it does not cover
Protective eyewear in the US is built to ANSI/ISEA Z87.1, and OSHA 1910.133 requires eye protection that meets it. The marking on the frame is the specification, and the important distinction is a single character: Z87 is basic impact, Z87+ is high impact β tested with a quarter-inch steel ball at 150 ft/s for spectacles. If the work throws anything, Z87+ is the line.
The suffixes narrow it further: D3 is splash and droplet, D4 dust, D5 fine dust. These matter because a spectacle cannot earn D3 β droplet protection needs a sealed goggle. Safety glasses are impact protection, not chemical splash protection, however wraparound the lens looks, and substituting one for the other is a common and consequential error.
A face shield is also secondary protection under 1910.133: it is worn over primary eye protection, never instead of it. And tint is not shade β a dark lens without a stated IR/UV shade number offers no rated protection against radiant energy.
Frequently asked questions
What is the MCR Safety Law OG1 OTG?
The entry-level over-the-glasses (OTG) safety glass in MCR's line, rated ANSI/ISEA Z87.1+ high-impact and built to fit over most standard prescription eyeglass frames. It comes in two variants - Clear and Gray, both with UV Anti-Fog coating - on the widened Law frame.
What does OTG (over-the-glasses) mean?
OTG frames are sized to fit over your own prescription eyeglasses, giving Z87.1+ impact protection without buying prescription safety lenses or switching to contacts. The Law frame's widened cavity and extended temples accommodate most Rx frames underneath.
Who is the OG1 built for?
Workers who wear prescription eyeglasses and need impact protection over them - so there's no removing PPE to read labels or see fine detail, and no cost or lead time for prescription safety lenses. It's the simple, universal OTG option.
Why do both variants have anti-fog?
OTG designs trap warm air between the safety lens and your prescription lens, which amplifies fogging. MCR ships both the clear and gray Law OG1 with UV Anti-Fog because fog control isn't optional on an OTG - it's the difference between wearing it and pushing it up.
Is it ANSI Z87.1+ rated?
Yes - it carries the ANSI/ISEA Z87.1+ high-impact rating (the '+' marks passing the high-velocity and high-mass impact tests), so it meets the requirement for most industrial eye hazards, worn over your glasses.
OG1 or the Klondike OG2 OTG?
The OG1 is the entry option: two anti-fog variants on the Law frame. The OG2 upgrades to the larger Klondike frame, adds hi-vis frame options, and offers MAX6 and Dual Coat coatings. If you need hi-vis or premium anti-fog, step to the OG2; if you need a simple OTG, the OG1 delivers.
Will it fit over any prescription frame?
It fits most standard prescription frames, but very large or wraparound Rx frames may not seat well. Check the fit over your specific glasses - an OTG that doesn't close properly leaves gaps that defeat the protection.
Is it enough, or do I need goggles?
The OG1 OTG protects against impact and debris from the front and sides. It is not a sealed goggle - it does not seal against a chemical splash hazard, fine dust, or vapor, which need sealed OTG goggles or a face shield. Match the eyewear to your hazard.
Does it block UV?
Yes - the UV Anti-Fog coating and polycarbonate lens block UV, worn over your clear prescription lenses. That covers the UV exposure of general-industry and outdoor tasks.
How does the gray tint work over clear Rx lenses?
The gray OTG lens sits outside your clear prescription lens, tinting the whole view for outdoor glare - like putting sunglasses over your glasses, but Z87.1+ rated. Use clear indoors and gray outside.
How do I care for the lenses?
Rinse grit before wiping and use a microfiber or lens-safe cloth on both the OTG lens and your glasses underneath; harsh cleaners strip the anti-fog coating. Retire the OTG lens once scratches enter your line of sight.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Customer Reviews
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.