Malta Dynamics Type 2 Safety Helmet with Visor β Class C, Integrated Z87 Visor (HTW2002)
EDITORIAL REVIEW: 4.5/5 WC Safety Review β the Malta Dynamics Type 2 Safety Helmet with Visor Editorial assessment by the WC Safety Editorial Team, based on published Malta Dynamics specifications and the ANSI/ISE...
Check Price on Amazonπ Amazon Associate Β· You pay the same price Β· We earn a small commission
Editorial assessment by the WC Safety Editorial Team, based on published Malta Dynamics specifications and the ANSI/ISEA Z89.1 and Z87.1 standards. We did not laboratory-test this product.
SHOP SAFETY HELMETS βSHOP VENTED HARD HATS β
Malta Dynamics Type 2 Safety Helmet with Visor Overview
The Malta Dynamics Type 2 Safety Helmet with Visor (HTW2002, from the APEX line) is a vented climbing-style safety helmet that meets ANSI/ISEA Z89.1-2014 Type 2 and Class C, plus EN 12492, with top, side, front, and back impact protection. Its integrated flip visor is rated to ANSI Z87.1-2015 for impact.
As the Malta Dynamics HTW2002, this Malta Dynamics APEX safety helmet is a Type 2 safety helmet with visor. It is a vented Type 2 Class C helmet and a safety helmet with integrated face shield for construction and industry.
The visor comes clear or tinted (tinted is 99% UV-resistant) with anti-fog, and the helmet has a lightweight ABS shell and a 4-point chin strap. Because it is vented, it is Class C with no electrical protection β covered below. Compare it with the JSP EVO VISTAshield and the Milwaukee BOLT, understand the ratings in hard hat classes explained, and browse the range in safety helmets.
Who This Helmet Is For
| Use case | Fit | Buyer guidance |
|---|---|---|
| Head plus eye/face impact | Purpose-built | Integrated Z87.1 flip visor. |
| Lateral (side) impact hazards | Strong | ANSI Type 2 top and side. |
| Hot conditions, breathability | Strong | Sliding adjustable vents. |
| Electrical or arc-flash hazards | Not suitable | Vented Class C; use a Class E. |
| Chemical-splash eye hazard | Add goggles | Visor is impact-rated, not sealed. |
Know what each rating covers. The integrated visor is an ANSI Z87.1-2015 impact-rated shield β it guards against flying particles and impact, and the tint helps with glare and UV, but it is not a sealed goggle and does not protect against a chemical splash hazard; where liquids can splash the eyes, add indirect-vented splash goggles. The helmet is Type 2, rated for top and side impact, and because it is vented it is Class C with no electrical protection, so choose a non-vented Class E helmet for energized work. A helmet also protects your head, not your body: working at height still requires separate fall-arrest equipment with a rated harness and anchor, no matter how secure the chin strap. Confirm the ratings marked on the shell and visor against your hazard, and inspect both before each use. Learn more in Type I vs Type II and OSHA 1910.133 eye and face protection.
Pros & Cons
- ANSI Type 2 top and side impact
- Integrated Z87.1 flip visor; clear or tinted
- Anti-fog; tinted is 99% UV-resistant
- Vented ABS shell; 6-point ratchet
- Adjustable, removable 4-point chin strap
- Class C: no electrical protection
- Visor is impact-rated, not splash-sealed
- Vents rule out an electrical rating
- Value brand; verify markings for your task
How It Compares
The Malta Dynamics pairs a Type 2 helmet with a built-in visor. Weigh it against nearby options:
| Option | Type | Visor | Best for |
|---|---|---|---|
| Malta Dynamics Type 2 (this page) | Type 2, Class C | Integrated Z87.1 flip | Head plus eye/face, value |
| JSP EVO VISTAshield | Type I, Class C | Integrated Z87+ | Top-impact plus visor |
| Milwaukee BOLT front brim | Type 2, Class C | Add-on accessory | Type 2 with accessory system |
Choose the Malta Dynamics for Type 2 plus a built-in visor, the JSP EVO VISTAshield for a Type I integrated-visor helmet, or the MSA V-Gard H2 Pro for Type 2 with MIPS. See best safety helmets, Type I vs Type II, and hard hats vs safety helmets.
Specifications
| Brand / Model | Malta Dynamics APEX (HTW2002, with visor) |
| Helmet rating | ANSI/ISEA Z89.1-2014 Type 2, Class C (vented); EN 12492 |
| Visor | Integrated flip; ANSI Z87.1-2015 impact; clear or tinted; anti-fog; tinted 99% UV |
| Shell / suspension | Lightweight ABS; 6-point suspension with comfort ratchet |
| Retention / vents | Adjustable, removable 4-point chin strap; sliding adjustable vents |
| Compliance | OSHA 1910 and 1926 referenced; confirm markings for your task |
Related Guides
hard hat classes explained, Type I vs Type II, best safety helmets, hard hats vs safety helmets, OSHA 1910.133 eye and face protection, Class E vs Class G.
Related Resources
safety helmets vented hard hats face shields eye protection head protection
Frequently Asked Questions
What ANSI rating does the Malta Dynamics Type 2 helmet have?
The helmet meets ANSI/ISEA Z89.1-2014 Type 2 and Class C, plus EN 12492, so it is tested for top and side impact. The integrated visor meets ANSI/ISEA Z87.1-2015 for impact eye and face protection. Confirm the markings match your task.
What is the integrated visor for?
It is a flip-down face shield rated to ANSI Z87.1-2015 that guards the eyes and face against flying particles and impact, available clear or tinted with an anti-fog finish; tinted shields are 99% UV-resistant. Deploy it for eye and face hazards and flip it up when not needed.
Does the visor protect against a chemical splash?
No. The visor is impact-rated (Z87.1), not a sealed chemical-splash goggle, and the tint is for glare and UV, not for welding. Where liquids or chemical splash are a hazard, use indirect-vented splash goggles in addition to the helmet.
Is it vented, and can I use it for electrical work?
It has sliding adjustable vents for airflow, which makes it Class C with no electrical protection. Do not use it near energized electrical hazards; for electrical work choose a non-vented Class E helmet and follow your electrical-safety rules.
Is it Type 1 or Type 2?
It is ANSI Type 2, which adds side impact protection to the top-impact protection of a Type 1 helmet. That suits work where lateral impact, such as from a slip or a swinging object, is a concern.
Does it have a chin strap?
Yes. It has an adjustable, removable 4-point chin strap, which helps keep the helmet on during a slip or at height. A retained helmet is a key reason to choose a Type 2 safety helmet over a basic hard hat.
How does it adjust?
It uses a 6-point suspension with a comfort ratchet so you can dial the fit with one hand, plus the adjustable chin strap. Set it so the helmet sits level and snug, and re-check the fit after adding the visor or accessories.
What is the shell made of?
The shell is lightweight ABS, chosen for impact strength. Inspect it for cracks or dents and replace the helmet after any significant impact, since a damaged shell no longer protects to its rating.
Can I replace or swap the visor?
Malta Dynamics offers clear and tinted visors for the helmet, so you can fit the shield to your task and replace it if it is scratched or hazed. Confirm the replacement visor matches this helmet model before ordering.
Does the chin strap make it fall protection?
No. The chin strap keeps the helmet on, but a helmet is head protection, not fall protection. Working at height still requires separate fall-arrest equipment with a harness, connector, and rated anchor.
Is it good for construction and industrial work?
Yes. Malta Dynamics markets it as OSHA 1910 and 1926 compliant for construction and industrial environments, with Type 2 impact protection and an integrated visor. Confirm it meets the specific standards your site requires.
When should I replace it?
Replace the helmet after any significant impact, when the shell shows cracks or dents, or per Malta Dynamics' service-life guidance, and replace the visor when it is scratched or hazed. Inspect the shell, suspension, and visor before each use.
Written by Steven Eaton, WC Safety Editorial. Specifications sourced from Malta Dynamics published data and the ANSI/ISEA Z89.1 and Z87.1 standards. Compare the range in safety helmets.
WC Safety is an independent PPE retailer; no paid placement. Vented Class C helmets provide no electrical protection, and an impact-rated visor is not a chemical-splash goggle; verify the ratings marked on the helmet and visor against your hazard before use.
Customer Reviews
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.