JSP EVO VISTAshield Ascend Safety Helmet — Vented Type I Class C, Integrated Visor

SHOP SAFETY HELMETS →SHOP VENTED HARD HATS →

JSP EVO VISTAshield Ascend Safety Helmet Overview

Who This Helmet Is For

Know what each rating covers. The integrated VISTAshield is an ANSI Z87+ impact-rated face shield — it guards against flying particles and impact, but it is not a sealed goggle and does not protect against a chemical splash hazard; where liquids can splash the eyes, add indirect-vented splash goggles. The helmet is Type I, rated for top impact, not Type II lateral impact, and because it is vented it is Class C with no electrical protection, so choose a non-vented Class E helmet for energized work. A helmet also protects your head, not your body: working at height still requires separate fall-arrest equipment with a rated harness and anchor, no matter how secure the chinstrap. Confirm the ratings marked on the shell and shield against your hazard, and inspect both before each use. Learn more in Type I vs Type II and OSHA 1910.133 eye and face protection.

Pros & Cons

How It Compares

Specifications

Related Guides

hard hat classes explained, Type I vs Type II, best safety helmets, hard hats vs safety helmets, OSHA 1910.133 eye and face protection, best hard hat for electrical work.

Related Resources

safety helmets vented hard hats face shields eye protection head protection

Frequently Asked Questions

What ANSI rating does the JSP EVO VISTAshield Ascend have?

The helmet meets ANSI Z89.1 Type I and Class C, plus EN 12492, and the integrated face shield meets ANSI Z87.1+ and EN 166 for impact eye and face protection. Type I covers top impact and Class C means the vented shell has no electrical protection.

What is the integrated face shield for?

It is a retractable ANSI Z87+ face shield that guards the eyes and face against flying particles and impact, with a scratch- and fog-resistant coating and a panoramic optical class 1 view. Deploy it for eye and face hazards and retract it when it is not needed.

Does the shield protect against a chemical splash?

No. The VISTAshield is impact-rated (Z87+), not a sealed chemical-splash goggle. Where liquids or chemical splash are a hazard, use indirect-vented splash goggles or a splash-rated face shield in addition to the helmet.

Can I wear glasses under it?

Yes. The helmet and shield are designed to be compatible with prescription eyewear, so you can wear your glasses comfortably underneath. Confirm the fit with your specific frames before relying on it in the field.

Is it vented, and can I use it for electrical work?

This model is vented, which makes it Class C with no electrical protection. Do not use it near energized electrical hazards; for electrical work choose a non-vented Class E helmet and follow your electrical-safety rules.

Is it a Type I or Type II helmet?

It is ANSI Type I, which covers top impact, and it also meets EN 12492. It is not ANSI Type II, so if you specifically need Type II lateral-impact protection, choose a Type II helmet instead.

How does it adjust?

It uses the Revolution Flex wheel-ratchet 6-point harness with a 3D-adjustment system and a cotton sweatband for a secure, comfortable fit, plus a 4-point chinstrap for retention at height. Set it so the helmet sits level and snug.

Is the shield replaceable and does it fog?

The face shield has a scratch- and fog-resistant coating to limit fogging, and JSP offers replacement visors for the EVO VISTAshield line. Replace the shield if it is scratched or hazed enough to reduce your view.

What is the shell made of and how much venting does it add?

The shell is lightweight ABS, and JSP states the venting lowers the internal temperature by an average of about 5 to 7°F for comfort. The trade-off for that venting is that the helmet is Class C with no electrical rating.

Does the chin strap make it fall protection?

No. The 4-point chinstrap keeps the helmet on during a slip or at height, but a helmet is head protection, not fall protection. Working at height still requires separate fall-arrest equipment with a harness, connector, and rated anchor.

Is it good for work at height and rescue?

Yes. The Ascend line is built for work at height with a chinstrap and EN 12492 compliance, so it suits climbing, rescue, and elevated work. Confirm it meets the specific standards your task or team requires.

When should I replace it?

Replace the helmet after any significant impact, when the shell shows cracks or dents, or per JSP's service-life guidance, and replace the shield when it is scratched or hazed. Inspect the shell, harness, and shield before each use.