🔍 Click to zoom
Drager X-plore 8000 Particle Filter HE - PAPR High Efficiency Filter
$26.53
Final price set by Amazon · may vary
Short answer: the drager x-plore 8000 particle filter he - papr high is covered below on the specifications its own listing publishes, the standards it is certified to, and who it suits. WC Safety Editorial Pick: T...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
Short answer: the drager x-plore 8000 particle filter he - papr high is covered below on the specifications its own listing publishes, the standards it is certified to, and who it suits.
WC Safety Editorial Pick: The Drager X-plore 8000 HE filter is the standard replacement particle filter for the X-plore 8500 PAPR system — the correct choice when your hazard is particulates: dust, silica, asbestos, welding fume, or biological aerosols without added chemical vapor hazards.
The Drager X-plore 8000 Particle Filter HE (High Efficiency) is the primary replacement particle filter for the Drager X-plore 8500 PAPR system. 'HE' in Drager's designation corresponds to the P100 efficiency level defined by NIOSH — 99.97% minimum filtration efficiency against 0.3-micron particles, making it suitable for the most demanding particulate hazards including asbestos, crystalline silica, metal fumes, lead dust, and biological aerosols. Maintaining an adequate supply of X-plore 8000 HE filters is a core requirement of any X-plore 8500 PAPR program.
Filter replacement timing on the X-plore 8500 is indicated by the system's low-flow alarm — when the filter loads sufficiently to reduce airflow below the NIOSH minimum, the alarm triggers and the filter must be replaced before the worker re-enters the hazard area. Preemptive replacement based on your facility's established filter change schedule (by shift, by task, or by measured exposure) is the preferred approach in programs with consistent exposure levels, as it eliminates reliance on alarm-based replacement which can create a brief lapse in protection during end-of-life loading.
For mixed hazard environments where organic vapors are present alongside particulates, the X-plore 8000 HE filter alone is insufficient — the OV/HE combination filter provides the required dual protection. Procure the HE particle filter for strictly particulate-only environments (grinding, sanding, asbestos abatement, pharmaceutical powder handling) and use the appropriate combination filter where vapor hazards are present. Order filter quantities based on your planned replacement schedule and number of active PAPR units to avoid stockouts.
drager x-plore 8000 particle filter he - papr high — what the listing actually specifies
Key Features
An air-purifying respirator filters air, it does not supply any. Under 29 CFR 1910.134 no air-purifying respirator may be worn in an atmosphere that is IDLH or oxygen-deficient (below 19.5% oxygen). Those conditions require a supplied-air respirator or an SCBA, and no filter or cartridge rating changes that.
- High Efficiency (HE / P100 equivalent): 99.97%+ filtration at 0.3 microns
- NIOSH-approved — for use with X-plore 8500 PAPR system
- Protects against asbestos, silica, metal fumes, lead dust, biological aerosols
- Bayonet connection — tool-free replacement on the X-plore 8500 blower
- Low-flow alarm compatibility — X-plore 8500 alerts when filter is loaded
- For particulate-only environments — choose OV/HE combo for vapor hazards
Technical Specifications
| Spec | Value |
|---|---|
| Efficiency | HE / P100 (99.97%+ at 0.3 microns) |
| Compatible System | Drager X-plore 8500 PAPR |
| Filter Type | Particle only (no vapor protection) |
| Approval | NIOSH-approved |
| Connection | Bayonet (tool-free) |
Pros & Cons
✓ Pros
- P100-equivalent efficiency — maximum particulate protection
- Tool-free bayonet replacement — quick filter change in the field
- NIOSH-approved for use with X-plore 8500 PAPR
- Covers asbestos, silica, metal fumes, and biological aerosols
✗ Cons
- No vapor protection — add OV/HE combination filter for chemical vapor hazards
- Only compatible with X-plore 8500 PAPR — not interchangeable with non-Drager systems
Shop Compatible PAPR Equipment
- All PAPR Replacement Filters
- All Powered Air Purifying Respirators
- PAPR Cartridges
- 3M Versaflo TR-6710N HE PAPR Filter
- 3M Versaflo TR-3712N HE PAPR Filter
- 3M Versaflo TR-6600 Disposable Prefilter
- 3M Versaflo TR-3600 Prefilter 100-Pack
- 3M Versaflo TR-600-ECK Economy PAPR Starter Kit
- Allegro EZ Air Max PAPR
- 3M Versaflo TR-6820N HEPA/Nuisance OV Filter
- Full-Face Respirators
- Half-Face Respirators
More from our PAPR Filter reviews
The trade-offs behind this choice are worked through in 3m 2091 vs 2097 filter, 3m 2091 vs honeywell north 7580p100, 3m 6000 vs 6500 respirator, 3m 6000 vs 6500 vs 7500 series half mask respirator compared, 3m 6001 vs 6003 cartridge.
The rest of the range sits in 3m 6000 series full face mask respirator, 3m 60921 vs 60923 vs 60926 respirator cartridges, 3m 7800 series full face mask respirator.
Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.
Further reading that bears directly on this choice: 3m 6003 vs honeywell north 7583p100l, 3m 60921 vs 60923 cartridge, 3m 60921 vs 60923 vs 60926 cartridge, 3m 60921 vs 60926 cartridge.
Alternatives at the same protection level are listed in 3m disposable respirators, 3m full face mask respirators.
Related standards and selection guidance: 3m 60921 vs honeywell north 7581p100l, 3m 60923 vs 60926 cartridge, 3m 60926 vs honeywell north 75scp100l, 3m 6500 vs 7500 respirator.
To see what else meets the same specification, start with 3m half mask respirators, 3m respirator filters and cartridges.
Read our detailed Drager X-plore 8000 Particle Filter HE - PAPR High Efficiency Filter review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
Drager
Model / SKU
6739540
Product Type
PAPR Filter
Price
$26.53 (Amazon)
Rating
4.4 / 5 — 16 Amazon ratings
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
★★★★☆4.4 / 5· 16 ratings on Amazon
★★★★★
Effective but kind of pricey
It works good and the air stays clean and very filtered. It's kind of expensive but I guess that's what you pay for all of this OSHA compliance and stuff. It definitely works and is high quality.
Verified Purchaser · February 5 · ✓ Amazon Verified Purchase
Showing 1 of 16 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What PAPR system does the Drager X-plore 8000 HE filter work with?
The X-plore 8000 HE filter is designed for use with the Drager X-plore 8500 PAPR system. It is not compatible with other manufacturers' PAPR blower units.
What is 'HE' filtration on a Drager PAPR filter?
HE (High Efficiency) is Drager's designation for filters meeting the P100 efficiency standard — 99.97% minimum filtration against 0.3-micron particles. This is equivalent to NIOSH P100 classification.
Does the X-plore 8000 HE filter protect against chemical vapors?
No. The HE particle filter provides particulate protection only. For environments with organic vapors, acid gases, or other chemical vapor hazards, use the X-plore 8000 OV/P100 combination filter.
How do I know when to replace the X-plore 8000 HE filter?
The X-plore 8500 PAPR's low-flow alarm triggers when filter loading reduces airflow below the safe minimum. Replace the filter immediately when the alarm activates. Proactive scheduled replacement based on your exposure assessment is the preferred approach.
How do I install the X-plore 8000 HE filter on the X-plore 8500?
Align the filter bayonet with the blower inlet and turn to lock. The connection is tool-free. Confirm the filter is fully seated and locked before entering the hazard area.
Is the X-plore 8000 HE filter NIOSH approved?
Yes. The X-plore 8000 HE filter is NIOSH-approved for use as part of the Drager X-plore 8500 PAPR system.
Can the X-plore 8000 HE filter be used for asbestos abatement?
Yes. P100 (HE) filtration provides the required efficiency for asbestos abatement applications. Confirm that your state and federal abatement program accepts the X-plore 8500 PAPR system APF for the specific task.
Is the X-plore 8000 HE filter reusable?
PAPR particulate filters are generally not intended for cleaning and reuse — replace when loaded. Some programs allow inspection and reuse for very low-exposure tasks, but this should be validated by your industrial hygienist.
How many filters should I stock per X-plore 8500 unit?
Stock at minimum 2-3 filters per active unit as ready replacements, plus your planned replacement quantity based on your shift schedule and exposure assessment. Never let active units run without a spare filter available.
Does the X-plore 8000 filter fit other Drager PAPR models?
The X-plore 8000 filter series is designed for the X-plore 8500 blower. Verify compatibility with other Drager PAPR models before ordering — filter connections are not universally interchangeable across Drager's PAPR product line.
What hazards does the X-plore 8000 HE filter protect against?
The HE filter protects against asbestos fibers, crystalline silica dust, metal fumes (lead, manganese, hexavalent chromium), pharmaceutical powders, biological aerosols (mold, bacteria, viruses), and other solid and liquid aerosol particles at or below 0.3 microns.
Where can I see other PAPR filter options?
Browse our full selection of PAPR replacement filters at PAPR Respirator Filters . Written by Steven Eaton , WC Safety — PPE Specialist with 10+ years sourcing and evaluating industrial respiratory protection. All specifications are manufacturer-verified or NIOSH-documented. Reviewed by: WC Safety Editorial | Buy Drager X-plore 8000 Particle Filter HE - PAPR High Efficiency Filter on Amazon →