Drager X-plore 8000 Gas/Particle Combination Filter for PAPR

The Drager X-plore 8000 Gas/Particle Combination Filter provides dual protection for X-plore 8500 PAPR users working in environments where both airborne particulates and chemical vapors are present. While the HE-only particle filter is appropriate for strictly particulate environments (grinding, asbestos abatement), the combination filter is the correct selection for any environment where solvent vapors, organic chemicals, or hazardous gases coexist with the particulate hazard. Chemical processing plants, spray painting booths, pharmaceutical synthesis areas, and agricultural chemical applications all commonly require combination filtration.

The combination filter layers an activated carbon gas sorbent bed ahead of the HE (P100 equivalent) particulate layer, so both vapor and particle hazards are addressed in sequence. This is important in filter loading terms: the particle layer loads from the particulate exposure and the carbon layer saturates from vapor exposure, and the two processes are independent. If either layer reaches its capacity, the filter must be replaced. In high-particulate environments with moderate vapor, the particle layer typically determines replacement timing; in high-vapor, low-particulate environments, the carbon layer sets the schedule.

For PAPR program administrators: designate combination filters for all workstations where vapor air sampling confirms detectable organic vapor concentrations, and HE-only filters for strictly particulate operations. Mixing filter types within a program based on hazard assessment reduces cost (combination filters carry a higher unit cost than HE-only) while ensuring appropriate protection across all tasks. Consult your industrial hygienist's air sampling data and OSHA PEL/TLV analysis to determine which filter type is required at each workstation.

drager x-plore 8000 gas/particle combination filter — what the listing actually specifies

Key Features

An air-purifying respirator filters air, it does not supply any. Under 29 CFR 1910.134 no air-purifying respirator may be worn in an atmosphere that is IDLH or oxygen-deficient (below 19.5% oxygen). Those conditions require a supplied-air respirator or an SCBA, and no filter or cartridge rating changes that.

• Dual protection: organic vapor gas sorbent + HE (P100-equivalent) particulate layer
• For environments with combined gas-phase and particulate hazards
• Compatible with Drager X-plore 8500 PAPR system
• Bayonet connection — tool-free replacement
• NIOSH-approved for use with X-plore 8500 PAPR
• Appropriate for chemical processing, spray painting, pharmaceutical synthesis

Technical Specifications

Pros & Cons

Shop Compatible PAPR Equipment

• All PAPR Replacement Filters
• All Powered Air Purifying Respirators
• PAPR Cartridges
• 3M Versaflo TR-6510N OV/HE Cartridge 5-Pack
• 3M Versaflo TR-6530N OV/Acid Gas/HE Cartridge
• 3M Versaflo TR-6590N Multi-Gas/HE Cartridge
• 3M Versaflo TR-6710N HE PAPR Filter
• Full-Face Respirators
• Half-Face Respirators
• 3M Versaflo TR-600-ECK Economy PAPR Starter Kit
• Allegro EZ Air Max PAPR

If the decision is still open, the comparisons in 3m 2091 vs 2097 filter, 3m 2091 vs honeywell north 7580p100, 3m 6000 vs 6500 respirator, 3m 6000 vs 6500 vs 7500 series half mask respirator compared, 3m 6001 vs 6003 cartridge narrow it down.

Alternatives at the same protection level are listed in 3m 6000 series full face mask respirator, 3m 60921 vs 60923 vs 60926 respirator cartridges, 3m 7800 series full face mask respirator.

Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.

These cover the questions this page does not: 3m 6003 vs honeywell north 7583p100l, 3m 60921 vs 60923 cartridge, 3m 60921 vs 60923 vs 60926 cartridge, 3m 60921 vs 60926 cartridge.

To see what else meets the same specification, start with 3m disposable respirators, 3m full face mask respirators.