Condor 3PB83 Clear OTG Anti-Fog Safety Goggles — Over-The-Glasses
$12.04
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Condor 3PB83, an anti-fog OTG goggle that seals over prescription glasses. Editorial assessment by Steven Eaton, WC Safety editor, based on published Condor specific...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Condor 3PB83, an anti-fog OTG goggle that seals over prescription glasses.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Condor specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Condor specifications and category fit. We did not laboratory-test this product.
The Condor 3PB83 is an ANSI Z87.1 high-impact safety goggle sized to fit over prescription glasses (OTG), with a clear factory anti-fog, scratch-resistant lens, blocking 99.9% of UV and meeting OSHA 29 CFR 1910.133. It seals around the eye and the wearer's frames for full-surround protection without removing eyewear. It is the answer for prescription-glasses wearers who need a sealed goggle but do not want a separate prescription insert or contacts.
CHECK PRICE ON AMAZON → SHOP SAFETY GOGGLES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Condor 3PB83 works for glasses wearers
Prescription-glasses wearers often get stuck choosing between vision and eye protection — the OTG design solves that. The Condor 3PB83 is sized to fit over most prescription frames, sealing around both the eye and your glasses so you keep your prescription and still get a goggle's full-perimeter dust and debris protection. Its factory anti-fog and scratch-resistant lens holds clarity in heat and humidity, it carries the ANSI Z87.1 high-impact certification, and it blocks 99.9% of UV. As safety goggles go, this is the over-the-glasses pick, and the glasses-vs-goggles guide and anti-fog guide explain when a sealed OTG lens beats open glasses. It is a goggle that respects the eyewear you already wear.
Safety first: the 3PB83 seals against dust and debris over your glasses, but the listing does not state an ANSI Z87.1 D3 rating against a chemical splash hazard — so for dedicated chemical splash work choose a D3-marked indirect-vent goggle like the Bouton Futurex, and add a face shield for heavy splash. It is an impact-and-dust OTG goggle, not a shaded welding goggle, and a goggle that does not seal over your frames loses its protection. Confirm eye-and-face requirements with the OSHA 1910.133 guide.
What the Condor 3PB83 listing documents
From the published specs: ANSI Z87.1 high-impact certification; an OTG fit over most prescription frames; a clear factory anti-fog, scratch-resistant lens; and 99.9% UV blocking. These are true otg safety goggles and genuine anti-fog safety goggles — sealed over-the-glasses goggles for prescription wearers.
How the Condor 3PB83 compares to other goggles
For other over-the-glasses goggles, the 3M 2800 OTG, Sellstrom S71100 OTG, or Gateway Silverton OTG. For a D3 chemical goggle, the Bouton Futurex or Gateway Stoic; and for another anti-fog goggle, the 3M SecureFit or DeWalt DPG84. The Z87.1 standard guide and lab eyewear guide help match features to the task.
Choosing the right eye protection for your hazard
Impact, splash, and light are different hazards. For everyday impact eyewear, the safety glasses collection and safety glasses guide; for full-face coverage, the face shields guide; for shaded hot work, the welding goggles collection; and the full eye protection collection plus the when-do-you-need-eyewear guide help build the right kit.
Where it fits by job and crew orders
The OTG 3PB83 suits construction, manufacturing, and jobsite work for anyone who wears prescription glasses and needs a sealed goggle over them — compare eyewear with the eyewear buyer's guide. It saves the cost of prescription safety eyewear for occasional-use workers and keeps a spare on hand for visitors, so check that it seals over each wearer's frames and retire any lens that scratches. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the Condor 3PB83?
An ANSI Z87.1 high-impact safety goggle sized to fit over prescription glasses (OTG), with a clear factory anti-fog, scratch-resistant lens. It blocks 99.9% of UV and meets OSHA 29 CFR 1910.133 for full-surround eye protection over your own eyewear.
What does OTG mean?
OTG stands for over-the-glasses - the goggle is sized to fit over most prescription eyewear frames, so you keep your glasses on and still get a sealed goggle's dust and debris protection without a separate prescription insert.
Does it have an anti-fog lens?
Yes - the listing specifies a factory anti-fog coating that maintains clarity in humid, high-temperature, and perspiration-prone conditions, and the lens is also noted as scratch-resistant.
Is it rated for chemical splash?
The listing does not state an ANSI Z87.1 D3 chemical-splash rating. It is a sealed OTG dust-and-impact goggle; for dedicated chemical splash work, choose a D3-marked indirect-vent goggle and add a face shield.
How is a goggle different from safety glasses?
Safety glasses protect the front and sides but leave gaps; a goggle seals around the eye socket, blocking dust and debris from any direction. The OTG design does this while fitting over your prescription frames.
What work is it for?
Construction, manufacturing, and general jobsite work with dust and debris for anyone who wears prescription glasses and needs a sealed goggle over them, especially in fog-prone conditions.
What is the lens tint?
A clear lens with full visible light transmission for indoor and low-light work, blocking 99.9% of UV-A and UV-B. Clear is the general-purpose choice for most indoor and jobsite tasks.
Is it OSHA compliant?
It meets the requirements of OSHA 29 CFR 1910.133 for eye and face protection and carries the ANSI Z87.1 high-impact certification for impact resistance.
Will it fit over large frames?
It is sized to fit over most prescription eyewear frames, but very large or wide frames may not fit comfortably. Check the fit against your glasses, since a goggle that does not seal properly loses its protection.
How long does the anti-fog last?
Factory anti-fog coatings wear over time and with cleaning. Rinse gently, avoid abrasive wipes, and reapply an anti-fog product if fogging returns; replace the goggle once the lens is scratched or hazed.
When should I replace it?
Replace a goggle when the lens is scratched or hazed enough to obscure vision, when the seal or strap degrades, or after any significant impact - a compromised goggle no longer protects.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Researching this model? Read our detailed Condor 3PB83 OTG review.
Brand / Vendor
Condor
Model / SKU
4VCD5
Product Type
Safety Goggles
Price
$12.04 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Condor 3PB83?
An ANSI Z87.1 high-impact safety goggle sized to fit over prescription glasses (OTG), with a clear factory anti-fog, scratch-resistant lens. It blocks 99.9% of UV and meets OSHA 29 CFR 1910.133 for full-surround eye protection over your own eyewear.
What does OTG mean?
OTG stands for over-the-glasses - the goggle is sized to fit over most prescription eyewear frames, so you keep your glasses on and still get a sealed goggle's dust and debris protection without a separate prescription insert.
Does it have an anti-fog lens?
Yes - the listing specifies a factory anti-fog coating that maintains clarity in humid, high-temperature, and perspiration-prone conditions, and the lens is also noted as scratch-resistant.
Is it rated for chemical splash?
The listing does not state an ANSI Z87.1 D3 chemical-splash rating. It is a sealed OTG dust-and-impact goggle; for dedicated chemical splash work, choose a D3-marked indirect-vent goggle and add a face shield.
How is a goggle different from safety glasses?
Safety glasses protect the front and sides but leave gaps; a goggle seals around the eye socket, blocking dust and debris from any direction. The OTG design does this while fitting over your prescription frames.
What work is it for?
Construction, manufacturing, and general jobsite work with dust and debris for anyone who wears prescription glasses and needs a sealed goggle over them, especially in fog-prone conditions.
What is the lens tint?
A clear lens with full visible light transmission for indoor and low-light work, blocking 99.9% of UV-A and UV-B. Clear is the general-purpose choice for most indoor and jobsite tasks.
Is it OSHA compliant?
It meets the requirements of OSHA 29 CFR 1910.133 for eye and face protection and carries the ANSI Z87.1 high-impact certification for impact resistance.
Will it fit over large frames?
It is sized to fit over most prescription eyewear frames, but very large or wide frames may not fit comfortably. Check the fit against your glasses, since a goggle that does not seal properly loses its protection.
How long does the anti-fog last?
Factory anti-fog coatings wear over time and with cleaning. Rinse gently, avoid abrasive wipes, and reapply an anti-fog product if fogging returns; replace the goggle once the lens is scratched or hazed.
When should I replace it?
Replace a goggle when the lens is scratched or hazed enough to obscure vision, when the seal or strap degrades, or after any significant impact - a compromised goggle no longer protects.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.