Mechanix SpeedKnit S1DC05 Gloves, Coated-Knit Abrasion-Resistant

Mechanix SpeedKnit S1DC05 gloves — Abrasion-Resistant Work Gloves (No Cut Rating)

The Mechanix SpeedKnit S1DC05 gloves give your crew abrasion resistance and grip (this glove carries no ANSI cut rating) in a SpeedKnit S1DC05 that pairs a durable coated-knit shell with touchscreen-capable fingertips. Before you order, read the full hands-on review or see how it stacks up in the cut-resistant gloves buyer’s guide.

Note this is a grip-and-abrasion glove, not a cut glove: it is sold as coated knit work gloves. If you need a rated cut liner, our ANSI/ISEA 105 cut levels guide and the cut vs impact gloves comparison point you to the right tier.

Key features

• Seamless coated knit, touchscreen fingertips
• Abrasion-resistant grip build (no ANSI cut rating)
• Sizes S through 2XL
• Built for everyday shop work, assembly, and general handling
• Sold as abrasion resistant gloves for buyers cross-shopping that term

Pros & cons

Specifications

What the Mechanix SpeedKnit S1DC05 is for

Reach for the Mechanix SpeedKnit S1DC05 for everyday shop work, assembly, and general handling. Browse the full cut-resistant gloves range, or the broader hand protection catalog, to line it up against alternatives. Not sure where to start? Our how to choose work gloves reference walks through the decision. Buyers also stock these alongside material-handling gloves and search them as touchscreen work gloves.

Which size should you order?

Sizes S through 2XL. Measure across your palm and check the glove size chart — a cut liner should fit snug so it does not bunch at the fingertips. The how to choose cut gloves by ANSI level walk-through helps you match both the size and the protection tier to your task.

How the Mechanix SpeedKnit S1DC05 compares

Weigh the Mechanix SpeedKnit S1DC05 against Mechanix Durahide F9-360, Mechanix M-Pact, Mechanix Original. For a rated cut liner instead, see the cut-resistant gloves collection and the cut vs impact comparison; for impact, the impact-resistant gloves line. The best cut-resistant gloves guide ranks the full field so you can see where this pick lands.

Safety note: Cut and impact gloves reduce — but never eliminate — injury risk, and they are not rated against a chemical splash hazard, solvents, or live electrical work. Match the glove to a documented hazard assessment and replace any pair once the liner is nicked or worn through.

Ordering FAQ

What ANSI cut level is the Mechanix SpeedKnit S1DC05?
It is not ANSI cut-rated — it is an abrasion-and-grip glove. For sharp edges, choose a rated cut glove instead. Cut ratings describe lab cut resistance, not a cut-proof guarantee.

Is the Mechanix SpeedKnit S1DC05 in stock and ready to ship?
Yes — this listing is active and ships through Amazon. Select your size to see live availability and shipping speed.

What size of the Mechanix SpeedKnit S1DC05 should I order?
Sizes S through 2XL. Measure across your palm and use the glove size chart; a cut liner should fit snug, not loose.

Can I order the Mechanix SpeedKnit S1DC05 by the case?
Most sizes ship by the pair or by the box; bulk and case options appear on the linked Amazon listing for each size.

What tasks is the Mechanix SpeedKnit S1DC05 the right pick for?
It is built for everyday shop work, assembly, and general handling. Match it to your hazard assessment before relying on it.

Does the Mechanix SpeedKnit S1DC05 work with touchscreens?
Yes — the fingertips are touchscreen-capable.

How is the Mechanix SpeedKnit S1DC05 different from a disposable glove?
This is a reusable work glove with a knit or leather build, not a single-use disposable. It is washed and reused, not discarded after one task.

Is the Mechanix SpeedKnit S1DC05 heat-resistant?
No — it is not a heat glove. For hot surfaces, choose a dedicated heat-resistant glove.

Does the Mechanix SpeedKnit S1DC05 have impact protection?
No — it has no back-of-hand impact guards. For knuckle hazards, choose an impact-rated glove.

How do I reorder the Mechanix SpeedKnit S1DC05 later?
Reorder by the model number shown in the specifications above, or return to this page and select your size again.

Should I buy the Mechanix SpeedKnit S1DC05 or step up a cut tier?
If you face any sharp edges, skip this grip glove and order a rated cut glove instead.

Where can I read an independent review of the Mechanix SpeedKnit S1DC05?
See our full hands-on review, linked at the top of this page, for build notes, pros and cons, and how it compares to the rest of the lineup.

As an Amazon Associate, WC Safety earns from qualifying purchases. We stock and curate this product; affiliate links do not affect the price you pay.