🔍 Click to zoom
MCR Safety 92785NF-XL CutPro A5 Cut-Resistant Gloves, X-Large
$8.85
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 WC Safety Review — MCR Safety 92785NF-XL CutPro A5 Cut-Resistant Gloves — X-Large Editorial assessment by the WC Safety Editorial Team, based on published MCR Safety specifications and cate...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 WC Safety Review — MCR Safety 92785NF-XL CutPro A5 Cut-Resistant Gloves — X-Large
Editorial assessment by the WC Safety Editorial Team, based on published MCR Safety specifications and category fit. We did not laboratory-test this glove.
CHECK PRICE ON AMAZON →SHOP CUT-RESISTANT GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure.
MCR Safety 92785NF-XL CutPro A5 Cut-Resistant Gloves, X-Large Overview
The MCR Safety 92785NF-XL CutPro A5 cut-resistant gloves deliver high-level laceration protection sized for X-Large hands. Rated ANSI/ISEA 105 cut level A5, the CutPro shell pairs a cut-resistant knit with a nitrile palm coating that keeps fingers free to grip, sort, and assemble without sacrificing protection against sharp edges, metal stock, and glass. It sits near the top of the practical cut range for general handling, two steps below the A7-plus territory most crews reserve for the heaviest blade exposure.
This X-Large size (model 92785NF, XL) is built for crews in metal fabrication, glass and sheet handling, automotive assembly, construction, and warehouse picking who need dependable cut defense plus all-day dexterity. For the full cut-rating framework see ANSI/ISEA 105 cut levels explained, and to confirm fit before you order, check the glove size chart. Browse the wider range of cut-resistant gloves if you need a different cut level or size.
What MCR Safety Is Built For
| Task | Fit | Buyer guidance |
|---|---|---|
| Sheet metal & metal stamping handling | Strong fit | A5 cut rating handles deburred and raw edges; nitrile palm grips oily stock. Confirm A5 is sufficient for your edge exposure via the ANSI guide. |
| Glass and window handling | Strong fit | High cut resistance suits glazing and glass cutting; pair with sleeves where forearm exposure is a factor. |
| Automotive assembly & parts sorting | Strong fit | Coated palm retains dexterity for small fasteners and trim while shielding against sharp brackets and clips. |
| Warehouse picking & box cutting | Good fit | A5 protects against utility-knife slips and banding; XL sizing covers larger hands for repetitive grip work. |
| Wet or oily part handling | Conditional | Nitrile coating aids grip in light oil, but these are not waterproof. For wet cold work see the winter coated options below. |
| Chemical immersion or splash work | Not suitable | This is a cut glove, not a chemical barrier. Use dedicated chemical-resistant gloves for solvent or acid exposure. |
Cut and impact gloves reduce injury risk but do not make a task safe. Match the ANSI/ISEA 105 cut level (A1–A9) and ANSI/ISEA 138 impact level to the real hazard, inspect each pair for wear before use, and follow your site's hand-protection program. No glove is cut-proof or puncture-proof — keep hands clear of moving blades and pinch points. See ANSI/ISEA 105 cut levels explained.
Pros & Cons
Pros
- ANSI/ISEA 105 cut level A5 protection for sharp metal, glass, and edges
- Nitrile palm coating delivers grip and dexterity for small-part handling
- X-Large sizing covers larger hands for assembly and picking work
- Knit shell stays flexible for all-day wear versus stiff leather alternatives
- Part of the established MCR CutPro line with consistent sizing across the series
Cons
- Not waterproof or insulated — not ideal for wet or cold-weather work
- No ANSI/ISEA 138 impact rating, so not a back-of-hand impact glove
- Provides no chemical-barrier protection against solvents or acids
- A5 is high but not maximum cut; the heaviest blade exposure may call for A6 or higher
How It Compares
Within MCR's cut line, the 92785NF-XL holds an A5 rating that suits most general metal and glass handling. If your work involves blade contact at the high end, the cut-resistant gloves range includes A6 and A9 options such as the Predator A9 hi-vis needle-resistant series. For tasks that add back-of-hand impact exposure on top of cut risk, step up to impact-resistant gloves like the MCR Predator and ForceFlex families. To match the right level to your job, work through how to choose cut-resistant gloves by ANSI level.
Specifications
| Brand / Model | MCR Safety 92785NF (CutPro) |
| Cut Resistance | ANSI/ISEA 105 Level A5 |
| Glove Type | Cut-resistant knit work glove |
| Palm Coating | Nitrile |
| Size | X-Large (XL) |
| Best Use | Metal, glass, automotive, warehouse handling |
Related Glove Resources
cut-resistant gloves impact-resistant gloves material-handling gloves chemical-resistant gloves heat-resistant gloves nitrile gloves how to choose cut-resistant gloves by ANSI level ANSI/ISEA 105 cut levels explained nitrile gloves guide EN 388 glove standard explained
Frequently Asked Questions
What cut level are the MCR 92785NF-XL CutPro gloves?
They are rated ANSI/ISEA 105 cut level A5, a high tier suitable for sharp metal, glass, and edged handling. See our ANSI/ISEA 105 cut levels explained guide for how A5 compares to A1 through A9.
What size is the 92785NF-XL?
This listing is X-Large (XL). Measure your hand against the glove size chart before ordering, since cut-glove fit affects both protection and dexterity.
Are these gloves food safe or for medical use?
No. The 92785NF is an industrial cut-resistant work glove. It is not a food-safe, medical, or exam glove and carries no FDA or sterile certification.
What is the palm coating on these gloves?
The CutPro palm is nitrile-coated, which improves grip on dry and lightly oiled parts while preserving dexterity for small fasteners and trim.
Are the 92785NF-XL gloves waterproof?
No. The nitrile palm aids grip in light oil but these are not waterproof or insulated. For wet, cold work consider coated winter options in our catalog.
Do these gloves have an impact rating?
No. The 92785NF is a cut glove without an ANSI/ISEA 138 impact rating. If you need back-of-hand impact protection, see our impact-resistant gloves collection.
What jobs are A5 cut gloves best for?
A5 suits sheet-metal and stamping, glass and glazing, automotive assembly, and warehouse picking where utility-knife and edge cuts are the main hazard.
Can I use these for chemical handling?
No. These provide cut protection only and are not a chemical barrier. Use dedicated chemical-resistant gloves for solvent, acid, or immersion work.
How does A5 compare to lower cut levels?
A5 sits well above entry levels like A1 or A2, handling materials those cannot. Our guide on how to choose cut-resistant gloves by ANSI level walks through matching the level to your edge exposure.
Is the 92785NF the same glove in other sizes?
Yes. The CutPro 92785NF family runs across sizes from XS up to XL with consistent A5 cut performance; this page is the X-Large variant.
Will A5 stop a needle or puncture?
Cut ratings measure blade slicing, not puncture or needle resistance. For needle hazards, look at dedicated needle-resistant models such as the Predator A9 series in our cut-resistant gloves collection.
Do these meet EN 388 as well as ANSI?
ANSI/ISEA 105 A5 is the rating cited for this listing. EN 388 uses a separate scale; see our EN 388 glove standard explained reference if you need to cross-check European markings before buying.
Written by Steven Eaton, WC Safety Editorial — hand-protection desk. Specifications sourced from MCR Safety published data. Compare the range in cut-resistant gloves.
WC Safety is an independent PPE retailer and Amazon Associate; no paid placement. Match the glove to your specific hazard and follow your site PPE program.
Brand / Vendor
MCR Safety
Model / SKU
92785NF-XL
Product Type
Cut-Resistant Gloves
Condition
New
MPN
92785NF-XL
Price
$8.85 (Amazon)
Rating
4.5 / 5 — 2 reviews
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews
Customer Reviews
★★★★★4.6 / 5· 4 ratings on Amazon
★★★★★
None
True to the size. Fits good
Verified Purchaser · November 1 · ✓ Amazon Verified Purchase
★★★★☆
Too small
Gloves were too small need a larger size
Verified Purchaser · September · ✓ Amazon Verified Purchase
Showing 2 of 4 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.