Skip to content
Industrial Safety Equipment & PPE — ANSI/OSHA Compliant
Industrial Safety Equipment & PPE — ANSI/OSHA Compliant
July 16, 2026 Steven Eaton

MCR Safety 92785NF-XL CutPro A5 Cut-Resistant Gloves, X-Large Review (2026)

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. We stock this product; commissions do not influence our review.

★★★★½ 4.5/5

Reviewed by Steven Eaton, WC Safety Editorial

MCR Safety 92785NF-XL CutPro A5 Cut-Resistant Gloves, X-Large — Key Details
Brand MCR Safety
Category Cut-Resistant Gloves
Typical price $8.85
Model / SKU 92785NF-XL

The MCR Safety 92785NF-XL CutPro A5 Cut-Resistant Gloves, X-Large is a cut-resistant gloves from MCR Safety, stocked at $8.85. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

Editorial assessment by the WC Safety Editorial Team, based on published MCR Safety specifications and category fit. We did not laboratory-test this glove.

As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure .

The MCR Safety 92785NF-XL CutPro A5 cut-resistant gloves deliver high-level laceration protection sized for X-Large hands. Rated ANSI/ISEA 105 cut level A5 , the CutPro shell pairs a cut-resistant knit with a nitrile palm coating that keeps fingers free to grip, sort, and assemble without sacrificing protection against sharp edges, metal stock, and glass. It sits near the top of the practical cut range for general handling, two steps below the A7-plus territory most crews reserve for the heaviest blade exposure.

Where It Earns Its Slot

Where it earns its slot: Editorial assessment by the WC Safety Editorial Team, based on published MCR Safety specifications and category fit. We did not laboratory-test this glove.… The product page carries the full documented configuration; this review deliberately restates rather than embellishes it — claims beyond the listing don't appear here.

Honest Limits

Its honest limits: like every hand protection product, it protects within its stated ratings and use lane only — the family FAQ below draws those boundaries, and the guides linked underneath rank it against its true alternatives. Where the listing is silent on a spec, so are we; verify markings and instructions on arrival.

Pros and Cons

Pros

  • Documented cut-resistant gloves from MCR Safety
  • Model 92785NF-XL — traceable part number
  • Listing-grounded specs — nothing invented here

Cons

  • Configuration options live on the linked listing
  • Where the listing is silent on a rating, verify the physical markings

Alternatives in the Same Lane

Hand Protection Guides

Browse by Category

Frequently Asked Questions

How much does the MCR Safety 92785NF-XL CutPro A5 Cut-Resistant Gloves, X-Larg cost?

$8.85 at the linked listing — prices track the live page, and configuration choices there can shift the number.

What does the MCR Safety 92785NF-XL CutPro A5 Cut-Resistant Gloves, X-Larg listing actually document?

Editorial assessment by the WC Safety Editorial Team, based on published MCR Safety specifications and category fit. We did not laboratory-test this glove.…

What are the alternatives to the MCR Safety 92785NF-XL CutPro A5 Cut-Resistant Gloves, X-Larg?

The sibling cut-resistant gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.

What do ANSI cut levels A1-A9 mean?

Grams of force a blade needs to cut through in standardized testing — A1 (200g) through A9 (6,000g+). Match the level to the hazard: A2-A4 covers general handling, A5+ for glass, sheet metal, and blades. The level on the listing is the level.

What does ANSI/ISEA 138 cover?

Back-of-hand impact protection, levels 1-3 — the standard behind rated impact gloves. TPR padding without a stated 138 level is comfort-tier protection; the reviews here keep that distinction explicit.

What does glove mil thickness mean?

One mil = 0.001 inch of film thickness on disposables. Thicker resists tears and lasts longer; thinner gives feel. Exam-grade 3-5 mil for light tasks, 6-8+ mil for shop duty — polymer choice still matters more than thickness.

Nitrile, latex, or vinyl — which disposable?

Nitrile for chemical splash and punctures (and latex allergies), latex for elasticity and feel where allergies permit, vinyl for cost-sensitive light tasks. The complete guide linked below runs the decision in full.

How do I size work gloves correctly?

Measure palm circumference and match the maker's chart — patterns differ across brands. Coated and cut-resistant knits should fit snug; a loose cut glove wrinkles and snags exactly where the blade lands.

When do coated work gloves get replaced?

When the coating wears through at fingertips or palm, when knit runs appear, or when embedded grime stiffens the shell. Coating breach on a cut-rated glove ends the rating where it matters most.

Can cut-resistant gloves be washed?

Most knit cut gloves take machine washing per their listing's care line — it extends life materially. Disposables never; coated gloves depend on the coating chemistry. Check the listed care instructions.

Are cut-resistant gloves puncture-proof?

No — cut resistance measures blade slicing, not needle puncture; hypodermic protection is a separate rating few gloves carry. Sharps handling needs gloves rated for the actual mechanism.

Do food tasks need special gloves?

Food-contact-safe marking on the listing is the gate — several cut-resistant and nitrile lines carry it for food processing. A shop glove without the marking stays out of the kitchen.

What does OSHA require for hand protection?

29 CFR 1910.138: gloves matched to the assessed hazard — cut, chemical, thermal, or general mechanical. The assessment picks the rating class; the listing's stated levels tell you whether a glove satisfies it.

Why do gloves come in dozens on some listings?

Consumable economics — coated and disposable gloves are bought by the dozen or case because替 rotation and replacement are the model. Per-pair math on the case price is the honest comparison.

Touchscreen compatibility — real or marketing?

Real where listed — conductive fingertip yarns work. The tradeoff is usually a thinner tip, which matters on cut-rated gloves; the listing states both or neither.

The Bottom Line

Rated 4.5/5 on documented spec, configuration, and value. The MCR Safety 92785NF-XL CutPro A5 Cut-Resistant Gloves, X-Large does the job its listing describes — the guides above tell you whether it's the right pick against the field.

About the Author

Steven Eaton is the founder of WC Safety and an industrial PPE specialist who sources and evaluates hand protection equipment for industrial and construction buyers.

How We Review

Hand-protection reviews restate ANSI/ISEA 105 cut levels, ANSI/ISEA 138 impact levels, and mil thicknesses exactly as each listing states them — never inferred from appearance or price. Where a listing claims no level, the review says so and treats the glove as unrated for that hazard. Ratings reflect documented spec, configuration, and value — the basis is stated, not invented testing.

Affiliate Disclosure

WC Safety is an Amazon Associate and earns commissions on qualifying purchases through links on this page. Affiliate relationships do not influence our ratings.

Editorial Standards

Claims are drawn from listing data and published standards. WC Safety does not invent specifications or test results. Report errors to safetynw2012@gmail.com.

Filed in: Cut-Resistant Gloves, hand protection, MCR Safety, product review
Previous article AllaQuix Lite Hemostatic Gauze Pads, 4x4, Calcium Alginate Review (2026)

Leave a comment

* Required fields