Moldex Full Face Respirators — 9000 Series

Q: What sizes does the Moldex 9000 come in, and how do 9001 9002 9003 map?

Three true sizes on one listing: 9001 is Small, 9002 is Medium, 9003 is Large, selected as variants. On a full facepiece size matters more than on any other respirator — the seal runs the whole way around the face, and the APF 50 exists only for the size that passes your fit test.

Which Moldex full face respirator should you buy in 2026?

Short answer: one product, honestly presented — the Moldex 9000 Series, a reusable APF 50 facepiece in three true sizes (9001 Small, 9002 Medium, 9003 Large). Buy it if your site runs moldex cartridges already, or if the 9000's light build and wide lens fit your faces better at fit test than the bayonet-system alternatives. It ships bare — cartridges and filters are separate — and its filters are Moldex-only: no 3M, MSA or North cartridge fits, and the NIOSH approval attaches to the facepiece-plus-cartridge assembly. As a moldex respirator platform it shares its cartridge system with the 7000 half mask on half mask respirators; the cross-brand comparison lives on full face mask respirators, with the filter range under Moldex cartridges and filters and the wider category on respiratory protection.

Editor's pick — Moldex 9000 Series
Three true sizes, a wide field of view, and the Moldex locking cartridge system in a full facepiece. Read the Moldex 9000 Series listing for the size dropdown.

VIEW MOLDEX 9000 → CHECK PRICE ON AMAZON →

As an Amazon Associate, WC Safety earns from qualifying purchases. This has no bearing on which products appear here or in what order.

When a full face respirator mask is the right call — and when it is not

Choose the 9000 Series full facepiece when…	Stay with a half mask when…
The contaminant irritates or absorbs through the eyes	The hazard is particulate below 10× the limit
Exposure sits between 10× and 50× the limit	Heat and weight over a long shift matter more
Splash or spray reaches the face	You wear it with a welding helmet or face shield
Goggles keep fogging over a half mask	Budget covers more workers with fit tests

The Moldex 9000 Series at a glance

Moldex Full Face Respirator Masks are engineered for professionals who need dependable, high‑performance respiratory protection in demanding work conditions. Built with Moldex’s signature durability, comfort, and advanced filtration compatibility, these full‑face respirators provide a secure seal, exceptional visibility, and long‑lasting reliability. Ideal for industrial, chemical, construction, and emergency response applications, Moldex full face masks deliver the protection workers trust when safety cannot be compromised.

What the 9000 Series gives you

Full‑Face Protection
- Shields eyes, nose, and mouth from airborne hazards, eliminating the need for separate goggles.
- Reduces exposure to dust, chemicals, vapors, and irritants.
High‑Performance Respiratory Defense
- Compatible with Moldex cartridges and filters for protection against particulates, gases, and vapors.
- Designed to meet strict industry safety standards.
Wide, Panoramic Lens
- Offers a distortion‑free field of vision for improved accuracy and situational awareness.
- Impact‑resistant lens enhances safety in hazardous environments.
Comfort‑Engineered Fit
- Soft, flexible face seal conforms to facial contours for all‑day comfort.
- Lightweight construction reduces fatigue during extended use.
Durable, Long‑Lasting Build
- Made from rugged materials designed to withstand harsh industrial conditions.
- Resistant to wear, chemicals, and demanding work environments.
Easy to Clean & Maintain
- Smooth surfaces simplify disinfection and routine maintenance.
- Replacement parts and accessories available for long‑term use.
Secure Strap System
- Adjustable straps ensure a stable, personalized fit.
- Maintains a reliable seal even during active movement.

Where the 9000 Series fits

Construction & Demolition
- Protects against silica dust, insulation fibers, and airborne debris.
- Ideal for concrete cutting, grinding, and heavy‑duty demolition work.
Chemical Processing & Handling
- Suitable for environments with chemical vapors, solvents, and hazardous fumes.
- Commonly used in manufacturing plants, labs, and chemical storage facilities.
Painting, Coating & Finishing
- Shields users from paint overspray, solvents, and fine particulates.
- Excellent for automotive refinishing, industrial painting, and spray applications.
Agriculture & Pesticide Application
- Helps protect against fertilizers, pesticides, and agricultural chemicals.
- Useful for crop spraying, livestock care, and grain handling.
Emergency Response & Hazmat
- Used in emergency-response programmes for identified airborne contaminants whose concentrations have been reasonably estimated.
- This is an air-purifying respirator and adds no oxygen. OSHA 29 CFR 1910.134(d)(1)(iii) treats an atmosphere the employer cannot identify, or whose exposure cannot be reasonably estimated, as IDLH, and 1910.134(d)(2) then permits only a pressure-demand SCBA or a pressure-demand supplied-air respirator with an auxiliary self-contained air supply — neither of which is an air-purifying respirator.
Metalworking, Welding & Fabrication
- Guards against metal fumes, grinding dust, and industrial particulates.
- Suitable for welding shops, foundries, and fabrication facilities.

What actually distinguishes the 9000 Series

Three concrete things distinguish the 9000 Series : it shares Moldex’s own keyless bayonet cartridge mount with the 7000 Series half mask (not interchangeable with 3M-style bayonets), so a site already running Moldex consumables adds full-face protection without a second cartridge inventory; it comes in three true facepiece sizes rather than one shell with adjustable straps, which matters at fit-test time; and the facepiece is light for its class with a wide field of view. It ships bare — cartridges and filters are separate purchases, and it provides no protection until they are fitted.

Our methodology

This brand collection holds one product in three sizes, and every claim is read from its listing: APF 50 full facepiece, three size variants, no included cartridges. The listing does not publish a NIOSH TC approval number, so we point to the NIOSH Certified Equipment List for the exact facepiece-plus-cartridge assembly rather than asserting one; program requirements come from OSHA 29 CFR 1910.134, including the APF table at 1910.134(d)(3)(i)(A). We do not fit-test or lab-test respirators and hold no safety certification.

Why trust this page

WC Safety is an independent review site with no products of its own; purchase links go to Amazon and earn an affiliate commission at no extra cost to you. Moldex does not pay for placement — which is why this page says plainly that the shelf is one product, that the mask protects nothing until you buy cartridges, and that a half mask is the better purchase for most particulate-only work.

Frequently asked questions — Moldex full face respirator

What sizes does the Moldex 9000 come in, and how do 9001 9002 9003 map?

Three true sizes on one listing: 9001 is Small, 9002 is Medium, 9003 is Large, selected as variants. On a full facepiece size matters more than on any other respirator — the seal runs the whole way around the face, and the APF 50 exists only for the size that passes your fit test. If one size fails, try the adjacent size before changing platforms; facial geometry, not head size, decides it.

Which cartridges fit the Moldex full face respirator?

Moldex's own locking system only — the same Moldex cartridge range the 7000 half mask uses: particulate filters, organic vapor, multi-gas. Nothing from 3M, MSA or Honeywell fits, and adapting a cartridge voids the per-assembly NIOSH approval. Practical consequence: the brand decision is a supply-chain decision, so confirm your supplier can restock Moldex cartridges reliably before standardizing the facepiece.

Is the Moldex 9000 good for asbestos, lead or mold work?

It fits some of it: abatement commonly steps up to a full facepiece at APF 50 where exposures exceed half-mask limits. But for Class I asbestos work OSHA does not accept a negative-pressure APR like the 9000 — 29 CFR 1926.1101(h) requires supplied-air or PAPR configurations there — so confirm the work class and exposure assessment first. The specifics are program questions: the filter (P100 for asbestos and lead), the exposure data, and the written program under 1910.134 all have to line up — the cartridge and filter selector maps hazard to filter class, and no retail page, ours included, substitutes for that assessment.

Can I wear glasses under the Moldex 9000?

Not ordinary glasses — temple arms cross the sealing surface and break the seal, exactly as a beard does. The solution on any full facepiece is a spectacle kit that mounts prescription lenses inside the mask without touching the seal; check availability for the 9000 series with Moldex or your supplier before fit-test day, because discovering the need during the test costs you the appointment.

What assigned protection factor do Moldex full-face respirators provide?

A Moldex full-face respirator earns an OSHA assigned protection factor of 50 when the facepiece is fit-tested correctly and fitted with the right cartridges or filters.

Do Moldex full-face respirators come with cartridges or filters?

Most often the Moldex reusable facepiece arrives separately from its consumables. Add the cartridge or filter matched to your hazard - particulate, organic vapor, acid gas, or a combination.

Is fit testing required for a Moldex full-face respirator?

Yes. OSHA 1910.134 requires a fit test before first use and annually after, with a medical evaluation, because the seal between your face and the Moldex facepiece governs the protection.

Can a Moldex full-face respirator be worn with a beard?

No. Facial hair across the sealing surface ruins the seal and fails fit testing. A tight-fitting Moldex full-face respirator protects only when the sealing area is clean-shaven.

How often are the cartridges or filters changed?

Follow a change schedule set by the contaminant and its concentration. Particulate filters are replaced when breathing resistance rises; gas or vapor cartridges go on schedule or at the first odor or taste.

Moldex full-face or half-mask - what should I pick?

The Moldex full-face adds eye protection and a higher protection factor. A half-mask is lighter and works where eyes are protected separately and only basic breathing protection is required.

Can a Moldex full-face respirator be used in oxygen-deficient or IDLH areas?

No. The Moldex air-purifying respirator cleans air but adds no oxygen. Oxygen-deficient or IDLH atmospheres require a supplied-air respirator or an SCBA.

How should a Moldex full-face respirator be cleaned and stored?

Disassemble the Moldex facepiece, wash it with a mild cleaner, rinse, and air-dry. Keep it sealed in a bag, away from sunlight, dust, and the contaminants the respirator is built to block.

What sizes do Moldex full-face respirators come in?

Moldex reusable full-face facepieces are generally offered in small, medium, and large. Because size sets the seal, a fit test confirms which Moldex facepiece gives a reliable, leak-free fit.

How long do Moldex full-face respirators last?

With proper care the Moldex facepiece lasts for years. Cartridges, filters, and worn items like straps and valves are consumables that you renew as they wear out.

Related Safety Gear & Guides

Standards & references
Selection guidance on this page is mapped to these primary sources:

Cited for reference only. Standards text is not a substitute for a written program, a hazard assessment, or evaluation by a qualified safety professional.

Researched and written by Steven Eaton, editor of WC Safety. Steven holds no safety certification and does not test products; this page compares what manufacturers publish, with the gaps in that record marked. Last reviewed July 2026.

Sort by

View as

Moldex 9001 — Moldex 9002 Full-Face Respirator mask with clear visor and blue valve on a white background

Moldex 9000 Series Full Face Respirator (9001 9002 9003) — Reusable Tight-Fitting Facepiece, APF 50

Moldex

$165.06 - $226.90

$165.06

$181.94 - $226.90

$181.94

EDITORIAL REVIEW: 4.5/5 WC Safety Review — Moldex 9000 Series Full Face Respirator 9001 9002 9003 Editorial assessment by Steven Eaton, WC Safe...

View full details