🔍 Click to zoom
MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Impact
Size: X-Small
EDITORIAL REVIEW: 4.5/5 WC Safety Review — the MCR Safety PD6952 Predator impact gloves Read the full MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Impact review → Editorial assessment by Steven Eaton,...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 WC Safety Review — the MCR Safety PD6952 Predator impact gloves
Read the full MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Impact review →
Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this product.
CHECK PRICE ON AMAZON →SHOP CUT-RESISTANT GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure.
MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Impact Overview
The MCR Safety PD6952 Predator impact gloves are a hi-visibility coated-knit mechanics glove rated ANSI/ISEA 105 cut level A7 and ANSI/ISEA 138 impact Level 2. A 13-gauge salt-and-pepper cut-resistant HyperMax HPPE knit shell delivers the A7 cut resistance, a black bi-polymer palm coating adds durability, abrasion resistance, and grip, and patented tire-tread TPR on the back of the hand, fingers, and thumb provides the Level 2 impact protection. A fluorescent lime color keeps hands visible on site.
As A7 cut resistant gloves, the PD6952 pairs a high cut tier with mid-level impact defense: the HPPE knit carries the cut resistance, the bi-polymer coated gloves palm grips and resists wear, and the Level 2 impact gloves TPR shields the back of the hand. That makes these hi-vis mechanics gloves a strong pick for demanding, sharp-edged work.
Like any item in cut-resistant gloves, match the glove to the hazard. This is a cut-and-impact glove, not chemical or heat PPE. Compare this impact-resistant glove and mechanics glove against other tiers in our guides, and browse material-handling gloves before ordering.
What These Predator Gloves Are Built For
| Use case | Fit | Buyer guidance |
|---|---|---|
| High cut hazards (A7) | Purpose-built | HyperMax HPPE knit is rated A7 for sheet metal, glass, sharp parts. |
| Back-of-hand impact (Level 2) | Strong | Tire-tread TPR on back, fingers, and thumb gives Level 2 defense. |
| Oil and gas / heavy grip | Strong | The bi-polymer palm grips in dry and oily conditions. |
| High-visibility job sites | Strong | Fluorescent lime TPR keeps hands visible on the back and fingers. |
| Chemical or heat hazards | Not suitable | Mechanical PPE only; use chemical- or heat-rated gloves instead. |
Hand protection has to match the specific hazard. These are cut- and impact-resistant gloves for mechanical hazards — laceration and back-of-hand impact — not for every risk: they are not rated for chemicals, so for a chemical splash hazard use chemical-resistant gloves selected for the substance, and use heat-rated gloves for hot work. Confirm that A7 cut and Level 2 impact match your task, size the glove correctly for dexterity, inspect the knit, bi-polymer coating, TPR, and seams before each use, and replace the gloves once any layer is cut, worn, or cracked. Compare tiers in cut vs impact gloves and the ANSI/ISEA 138 impact standard.
Pros & Cons
Pros
- Published ANSI A7 cut resistance (HyperMax HPPE knit)
- Published ANSI/ISEA 138 Level 2 impact (tire-tread TPR)
- Black bi-polymer palm for grip, durability, abrasion resistance
- Hi-visibility fluorescent lime TPR
- 13-gauge knit keeps good dexterity for an A7 glove
Cons
- No D3O palm padding — use a D3O Predator for that
- Bi-polymer knit is less rugged than leather for heavy abrasion
- A7 may be more cut protection than light tasks need
- Confirm the size on this listing before ordering
How It Compares
The PD6952 is the A7, Level 2, bi-polymer-coated Predator. Weigh it against the alternatives before ordering:
| Model | Cut / Impact | Palm coating | Best for |
|---|---|---|---|
| PD6952 (this page) | A7 / Level 2 | Bi-polymer | High cut plus mid impact, oily grip |
| PD6951 | Per datasheet | Polyurethane | Dexterous PU-coated cut knit |
| PD43612 / leather driver | A9 / impact | Goatskin leather (none) | Highest cut in a rugged leather driver |
Choose the PD6952 for a published A7 cut and Level 2 impact with an oily-grip bi-polymer palm, the PD6951 for a PU-coated cut knit, or a leather driver for A9 in a rugged build. Compare in our best cut-resistant gloves guide and the best cut gloves for mechanics.
Specifications
| Brand | MCR Safety (Predator) |
| Model / Part Number | PD6952 (confirm size for this listing) |
| Type | Coated-knit mechanics glove, cut + impact |
| Cut Level | ANSI/ISEA 105 A7 |
| Impact Level | ANSI/ISEA 138 Level 2 |
| Shell / Coating | 13-gauge salt-and-pepper HyperMax HPPE cut knit; black bi-polymer palm coating |
| Back / Features | Patented tire-tread TPR on back, fingers, thumb; hi-vis fluorescent lime; confirm size |
Related Guides
best cut-resistant gloves, best impact-resistant gloves, cut vs impact gloves, ANSI cut levels A1–A9, ANSI/ISEA 138 impact standard.
Related Resources
cut-resistant gloves impact-resistant gloves mechanics gloves material-handling gloves
Frequently Asked Questions
What cut and impact rating does the PD6952 carry?
The MCR PD6952 is rated ANSI/ISEA 105 cut level A7 and ANSI/ISEA 138 impact Level 2. The A7 cut resistance comes from the HyperMax HPPE knit shell, and the Level 2 impact protection comes from patented tire-tread TPR on the back of the hand, fingers, and thumb.
What is the palm coating on the PD6952?
A black bi-polymer palm coating over the HyperMax knit. Bi-polymer coating adds durability, abrasion resistance, and grip, and it is the main construction difference from the PD6951, which uses a polyurethane palm coating instead.
How does the PD6952 differ from the PD6951?
Both share the 13-gauge HyperMax knit shell and tire-tread TPR. The PD6952 uses a black bi-polymer palm coating and publishes A7 cut and Level 2 impact ratings, while the PD6951 uses a polyurethane palm and does not publish specific cut and impact levels for that SKU.
Is A7 a high cut level?
Yes. On the ANSI/ISEA 105 scale of A1 through A9, A7 is a high tier suited to significant laceration hazards such as sheet metal, glass, and sharp-edged parts. Always match the cut level to your specific task rather than over- or under-specifying.
What does Level 2 impact protection mean?
ANSI/ISEA 138 rates back-of-hand impact protection on a scale of Level 1 to Level 3. Level 2 is the middle tier, delivered here by tire-tread TPR across the back, fingers, and thumb, and it suits many oil, gas, and heavy mechanical tasks. Confirm it fits your hazard.
Is the PD6952 a knit or leather glove?
It is a coated-knit glove: a 13-gauge HyperMax HPPE knit shell with a bi-polymer palm coating, not a leather driver. Knit gloves are more form-fitting and breathable than leather, and the HPPE knit carries the A7 cut resistance.
What makes the PD6952 hi-visibility?
The patented tire-tread TPR on the back, fingers, and thumb is a fluorescent lime color, which makes the gloves easier to see and identify on a busy or low-light site while still delivering the Level 2 back-of-hand impact protection.
Does the PD6952 have D3O padding?
No. Its impact protection comes from the tire-tread TPR on the back, fingers, and thumb, not a D3O padded palm. If you want D3O palm impact and vibration reduction, look at a D3O-padded Predator such as the PD2907 or PD2910.
What size is this listing?
MCR Safety offers the PD6952 in several sizes as separate part numbers; confirm the size on this listing before ordering. A correct fit matters for dexterity and for the TPR to sit right, so measure your hand and check the size shown.
Can I use these gloves for chemical handling?
No. These are cut and impact mechanics gloves, not chemical protection. For chemical exposure, use chemical-resistant gloves rated for the specific substance. Match the glove to the actual hazard.
Is the PD6952 good for oil and gas work?
Yes. The bi-polymer palm grips in dry and oily conditions, the A7 knit resists cuts from sharp tools and parts, and the Level 2 TPR guards the back of the hand against impact, which suits many oil, gas, and heavy industrial tasks.
When should I replace the PD6952?
Replace them when the knit or bi-polymer coating wears through, the HyperMax shell is cut or frayed, the tire-tread TPR cracks or detaches, or the seams give way. Damaged gloves no longer deliver their rated A7 cut or Level 2 impact protection.
Written by Steven Eaton, WC Safety Editorial. Specifications sourced from MCR Safety published data. Compare the range in cut-resistant gloves.
WC Safety is an independent PPE review site and Amazon Associate; no paid placement. Match the product to your specific hazard and follow your site PPE program.
Brand / Vendor
MCR Safety
Model / SKU
PD6952XS
Product Type
Impact-Resistant Gloves
Condition
New
MPN
MCR Safety PD6952L
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.