Ansell HyFlex 11-840 Gloves, Foam Nitrile Grip Work Gloves

Ansell HyFlex 11-840 gloves — Abrasion-Resistant Work Gloves (No Cut Rating)

The Ansell HyFlex 11-840 gloves give your crew abrasion resistance and grip (this glove carries no ANSI cut rating) in a HyFlex 11-840 that pairs an ergonomic nylon-spandex shell with a breathable foam nitrile palm. Before you order, read the full specification-based review or see how it stacks up in the cut-resistant gloves buyer’s guide.

Note this is a grip-and-abrasion glove, not a cut glove: it is sold as foam nitrile work gloves. If you need a rated cut liner, our ANSI/ISEA 105 cut levels guide and the cut vs impact gloves comparison point you to the right tier.

Key features

• Industry-standard general-purpose grip glove
• Abrasion-resistant grip build (no ANSI cut rating)
• Sizes 6 (XS) through 11 (XXL)
• Built for automotive, fabrication, assembly, and general handling where grip — not cut protection — is the priority
• Sold as general purpose work gloves for buyers cross-shopping that term

Pros & cons

Specifications

What the Ansell HyFlex 11-840 is for

Reach for the Ansell HyFlex 11-840 for automotive, fabrication, assembly, and general handling where grip — not cut protection — is the priority. Browse the full cut-resistant gloves range, or the broader hand protection catalog, to line it up against alternatives. Not sure where to start? Our how to choose work gloves reference walks through the decision. Buyers also stock these alongside material-handling gloves and search them as abrasion resistant gloves.

Which size should you order?

Sizes 6 (XS) through 11 (XXL). Measure across your palm and check the glove size chart — a cut liner should fit snug so it does not bunch at the fingertips. The how to choose cut gloves by ANSI level walk-through helps you match both the size and the protection tier to your task.

How the Ansell HyFlex 11-840 compares

Weigh the Ansell HyFlex 11-840 against Ansell HyFlex 11-518, Ansell HyFlex 11-531, Ansell HyFlex 11-542. For a rated cut liner instead, see the cut-resistant gloves collection and the cut vs impact comparison; for impact, the impact-resistant gloves line. The best cut-resistant gloves guide ranks the full field so you can see where this pick lands.

Safety note: Cut and impact gloves reduce — but never eliminate — injury risk, and they are not rated against a chemical splash hazard, solvents, or live electrical work. Match the glove to a documented hazard assessment and replace any pair once the liner is nicked or worn through.

Ordering FAQ

What ANSI cut level is the Ansell HyFlex 11-840?
It is not ANSI cut-rated — it is an abrasion-and-grip glove. For sharp edges, choose a rated cut glove instead. Cut ratings describe lab cut resistance, not a cut-proof guarantee.

Is the Ansell HyFlex 11-840 in stock and ready to ship?
This listing is active and ships through Amazon. Select your size to see live availability and shipping speed.

What size of the Ansell HyFlex 11-840 should I order?
Sizes 6 (XS) through 11 (XXL). Measure across your palm and use the glove size chart; a cut liner should fit snug, not loose.

Can I order the Ansell HyFlex 11-840 by the case?
Most sizes ship by the pair or by the box; bulk and case options appear on the linked Amazon listing for each size.

What tasks is the Ansell HyFlex 11-840 the right pick for?
It is built for automotive, fabrication, assembly, and general handling where grip — not cut protection — is the priority. Match it to your hazard assessment before relying on it.

Does the Ansell HyFlex 11-840 work with touchscreens?
Touchscreen capability varies by size and coating; check the linked listing for the exact model you select.

How is the Ansell HyFlex 11-840 different from a disposable glove?
This is a reusable work glove with a knit or leather build, not a single-use disposable. It is washed and reused, not discarded after one task.

Is the Ansell HyFlex 11-840 heat-resistant?
No — it is not a heat glove. For hot surfaces, choose a dedicated heat-resistant glove.

Does the Ansell HyFlex 11-840 have impact protection?
No — it has no back-of-hand impact guards. For knuckle hazards, choose an impact-rated glove.

How do I reorder the Ansell HyFlex 11-840 later?
Reorder by the model number shown in the specifications above, or return to this page and select your size again.

Should I buy the Ansell HyFlex 11-840 or step up a cut tier?
If you face any sharp edges, skip this grip glove and order a rated cut glove instead.

Where can I read an independent review of the Ansell HyFlex 11-840?
See our full specification-based review, linked at the top of this page, for build notes, pros and cons, and how it compares to the rest of the lineup.

As an Amazon Associate, WC Safety earns from qualifying purchases. Affiliate links do not affect the price you pay.