Klein Tools Type 2 Class E Safety Helmet — Non-Vented, 20kV (60564)

CHECK PRICE ON AMAZON →SHOP SAFETY HELMETS →

As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure.

Klein Tools Type 2 Class E Safety Helmet Overview

Who It Is For

A safety helmet protects your head, but it does not keep you from falling. Whenever you work at height above the trigger in OSHA 1926.501, head protection has to be paired with a personal fall arrest system — an anchor, a full-body harness, and a connecting device — not used in place of one. On the electrical side, Class E means the shell is proof-tested to 20,000 volts, but that is a supplementary test, not authorization to work energized: crews still de-energize, verify absence of voltage, and follow NFPA 70E and their electrical safety program. The rating also depends on keeping the shell intact, so do not drill it, paint it, or cover it with unapproved stickers, and use only Klein-approved accessories on the mounts. Set the ratchet and chin strap so the helmet stays put during a side impact or a climb. See Type I vs Type II and helmets vs bump caps to match the helmet to your hazard.

Pros & Cons

How It Compares

Specifications

Related Guides

Hard hat classes explained, Type I vs Type II, Class E vs Class G, best safety helmet, helmets vs bump caps.

Related Resources

Safety helmets head protection Klein non-vented full brim (Class E) Studson SHK-1 non-vented Ergodyne 8971 Class E

Frequently Asked Questions

What impacts does a Type 2 helmet protect against?

A Type 2 helmet is tested for both top impact and lateral impact, meaning blows to the front, back, and sides as well as the crown. That wider coverage is why safety helmets like this suit falls, swinging loads, and struck-by hazards, not just objects dropping straight down.

What does Class E mean on this helmet?

Class E is the ANSI electrical rating: the shell is proof-tested to 20,000 volts to reduce the hazard from contact with electrical conductors. Class G is proof-tested to 2,200 volts, and Class C offers no electrical protection. This 60564 is Class E.

Will I overheat in a non-vented helmet?

A non-vented shell traps more heat than a vented one, which is the trade-off for Class E electrical protection, since a Class E shell cannot have vent holes. The padded, sweat-wicking liner helps, but in hot, non-electrical work a vented Class C helmet may be more comfortable.

Does the helmet have a foam liner?

Yes. It uses a PC/ABS shell with an EPS foam liner. EPS is the energy-absorbing foam used in climbing and cycling helmets, and it is part of why a Type 2 safety helmet manages lateral impact better than a bare-shell traditional hard hat.

How much does the helmet weigh?

It weighs about 1.25 lb (0.57 kg). That is heavier than a basic cap-style hard hat but comparable to other Type 2 safety helmets, which carry more material and a chin strap to handle lateral impact and to stay on during a fall.

Can I machine wash the liner?

The comfort liner is padded, sweat-wicking, and machine-washable, so you can keep it clean on long or hot shifts. Follow Klein's care instructions, let it dry fully before reassembly, and inspect the shell and suspension while it is apart.

Does it include a chin strap?

Yes, it includes a removable chin strap. A chin strap helps keep a Type 2 helmet in place during a side impact, a slip, or work at height, and many jobsites require one for climbing and elevated work. You can remove it when it is not required.

What head sizes does it fit?

The 6-point suspension uses a ratchet knob with pivot adjustment and fits head sizes roughly 6.5 to 8. Turn the rear ratchet to tune the fit and use the pivot adjustment to set the helmet at the right height and angle.

Which ANSI edition does this meet?

It is rated to ANSI/ISEA Z89.1-2014 (R2019), Type 2, Class E. Standards are periodically revised, so confirm the marking molded or labeled inside the shell matches what your site or contract requires before you put it into service.

Can I put stickers on or drill the shell?

Avoid drilling, painting, or covering a Class E shell with unapproved stickers or solvents, because they can compromise the electrical rating and the shell's integrity. Use only Klein-approved accessories and mounting points to keep the rating valid.

Does non-vented mean it keeps rain out?

Non-vented means the shell has no ventilation holes, which is required for the Class E electrical rating; it is not a waterproofing claim. Water can still run off the shell and reach your face, so add a brim accessory or rain gear if runoff is a concern.

Is a safety helmet different from a traditional hard hat?

Yes. This safety helmet adds Type 2 lateral protection, an EPS liner, and a chin strap, closer to a climbing helmet, while a traditional hard hat is often Type 1 and top-impact only. Both must meet Z89.1, but the safety helmet covers a wider range of impacts.