3M 7093C Hydrogen Fluoride P100 Cartridge — with Nuisance-Level Acid Gas & Organic Vapor Relief

As an Amazon Associate, WC Safety earns from qualifying purchases. This does not affect the price you pay.

What the 3M 7093C Hydrogen Fluoride P100 Cartridge Protects Against

The 7093C carries two real, health-protective NIOSH ratings: hydrogen fluoride (HF) and P100 particulate (99.97% of oil and non-oil aerosols, magenta band). That combination is built for environments where HF and particulate appear together — semiconductor and electronics fabrication, metal etching and pickling, aluminum production, and glass etching. Fitted correctly, it can be used up to 10 times the permissible exposure limit on a half facepiece and 50 times on a full facepiece, for HF and particulate. It uses the 3M bayonet connection and fits 3M 6000/7000/FF-400 facepieces.

On top of those ratings, the 7093C's carbon layer provides nuisance-level relief against organic vapor and acid gas odors. This is the part people most often misread: nuisance relief is odor control at or below the PEL, not rated respiratory protection. The cartridge is not NIOSH-approved for organic vapors or acid gases except hydrogen fluoride, so if your exposure to a solvent vapor or a non-HF acid gas exceeds nuisance levels, you need a rated cartridge — the 3M 6001 organic vapor or 3M 60922 acid gas cartridge — not this one.

How It Compares in the 3M P100 Line

The 7093C is one of several P100 filters that differ by what they add on top of particulate filtration. The plain 3M 7093 is P100 only. The 2096 adds nuisance acid gas relief and the 2097 adds nuisance organic vapor relief. The 7093C goes furthest: it adds both nuisance OV and AG relief and the health-protective hydrogen fluoride rating — the only one of the group approved for HF. If HF is not part of your hazard, one of the simpler filters (or a rated gas cartridge for real OV/AG exposure) is usually the better match. Our P100 filter comparison and acid gas cartridge guide lay out the choices.

Pros & Cons

Specifications

Related Guides

Related Products

Frequently Asked Questions

What is the 3M 7093C's actual NIOSH rating?

It is NIOSH-approved for hydrogen fluoride (HF) and P100 particulate — 99.97% of oil and non-oil aerosols. On top of that it provides nuisance-level relief against organic vapor and acid gas odors. The HF and P100 ratings are the real, health-protective certifications; the organic vapor and acid gas relief is not a rated gas protection.

What does "nuisance level" acid gas and organic vapor relief actually mean?

Nuisance level means concentrations that do not exceed the OSHA Permissible Exposure Limit (PEL) or the applicable government limit, whichever is lower. The carbon in the filter reduces odor at those low levels — it is comfort and odor control, not respiratory protection. The 7093C is not NIOSH-approved for organic vapors or acid gases (except hydrogen fluoride) and must not be relied on for them above nuisance levels.

Is the 7093C real protection against hydrogen fluoride, or is HF also nuisance-level?

Hydrogen fluoride is a genuine, NIOSH-approved rating on the 7093C — that is what distinguishes it from a plain P100 filter and what the "C" variant is built for. HF is the one gas this cartridge is health-protective against, up to 10 times the PEL on a half mask or 50 times on a full facepiece. The organic vapor and acid gas coverage, by contrast, is nuisance relief only.

What applications is the 7093C designed for?

It is aimed at work where hydrogen fluoride and particulate occur together — semiconductor and electronics fabrication, metal etching and pickling, aluminum production, and glass etching, among others. In those settings the HF rating plus P100 particulate filtration is exactly the combination needed, with the nuisance relief handling incidental odors.

What is the difference between the 7093C and the plain 7093?

The 7093 is a P100 particulate filter only. The 7093C adds the hydrogen fluoride rating and the nuisance-level organic vapor and acid gas relief. If your hazard is only particulate, the 7093 (or a filter like the 2091) is sufficient; choose the 7093C specifically when hydrogen fluoride is present.

How does the 7093C differ from the 2096 and 2097 relief filters?

All three are P100 filters with a nuisance-relief carbon layer, but they differ in what they add. The 2096 adds nuisance acid gas relief, the 2097 adds nuisance organic vapor relief, and the 7093C adds both nuisance OV and AG relief plus the health-protective hydrogen fluoride rating. Only the 7093C is rated for HF.

If I need real acid gas or organic vapor protection, what should I use instead?

Use a NIOSH-rated gas cartridge matched to your contaminant. For acid gases like chlorine or sulfur dioxide, use the 3M 60922 acid gas cartridge; for organic solvent vapors, use the 3M 6001 organic vapor cartridge or a 60921 OV/P100 combination. Do not substitute the 7093C's nuisance relief for a rated cartridge when levels exceed the PEL.

What facepieces does the 7093C fit?

It uses the 3M bayonet connection and fits 3M 6000, 7000, and FF-400 series half and full facepieces. It is not compatible with Honeywell/North, MSA, Moldex, or GVS respirators, which use different connections.

Besides the respirator, what else do I need when working with hydrogen fluoride?

Hydrogen fluoride is highly toxic and readily absorbed through skin, where it can cause deep, delayed burns and systemic effects, so respiratory protection alone is not enough. HF work requires chemical-resistant skin and eye protection, engineering controls, and an emergency plan — many HF programs keep calcium gluconate gel on hand. Follow your site's HF-specific safety program and SDS.

What is the assigned protection factor of the 7093C?

Fitted correctly, it can be used up to 10 times the PEL on a half facepiece and up to 50 times on a full facepiece — and that applies to hydrogen fluoride and particulate, not to non-HF organic vapors or acid gases. If your measured HF exposure exceeds those multiples, you need a powered or supplied-air respirator.

How do I know when to replace the 7093C?

Replace the P100 stage when breathing resistance rises, and change the cartridge on a written schedule for hydrogen fluoride based on your exposure — the nuisance relief carbon has no end-of-service-life indicator, so you cannot judge it by odor. Also replace it if it is damaged, wet, or past the manufacturer's shelf life.

Can the 7093C be used in an oxygen-deficient or confined space?

No. It is an air-purifying cartridge, so it cleans existing breathable air but cannot add oxygen or protect in an unknown atmosphere. A confined space or a low-oxygen atmosphere requires a supplied-air respirator, and any exposure at immediately dangerous levels requires supplied air regardless of the cartridge rating.

Does the 7093C protect against welding fumes or general dust?

The P100 stage captures 99.97% of particulate, including many metal fumes and dusts, so it covers the particulate side of tasks like welding or grinding. But it adds no rated gas protection beyond HF, so if your task also generates ozone or other gases you need the appropriate rated cartridge. Match the filter to the full hazard, not just the dust.