Is the TRADESAFE TSKAU10YL Yellow Lockout/Tagout Lock Set the right multi-pack of LOTO padlocks for equipping a budget-driven maintenance crew?

Short answer: If you need to outfit a whole crew with bright, identifiable lockout padlocks without a premium per-lock cost, the TSKAU10YL ten-pack is a sensible budget buy that meets the durable, standardized, color-coded intent of OSHA 29 CFR 1910.147. The catch: confirm the keying before you issue them — for true one-worker-one-key personal control, a stated keyed-different pack like the sibling TRADESAFE TS1KD10R red set or the ABUS 74/40 keyed-different 10-pack removes the guesswork. Read how to choose a lockout padlock first.

TRADESAFE TSKAU10YL Yellow Lockout/Tagout Lock Set (10-Pack) Review (2026)

In a lockout/tagout program, the padlock is the device that physically holds an energy-isolating point — a breaker, valve, or disconnect — in the safe position so equipment cannot be re-energized while a worker is exposed. The TSKAU10YL's role is to supply that device in bulk: ten yellow aluminum lockout padlocks in one economy order, color-coded for the construction contractors, general maintenance crews, or designated shift that a multi-color program assigns yellow to. It sits at the budget end of the personal-lockout category, where the Master Lock 410GRN and American Lock A1107R cover single-color crew assignments and the Brady SafeKey aluminum line covers the premium tier. To see where a padlock multi-pack fits versus a hasp or a personal kit, start with what is lockout/tagout and how to perform LOTO.

Editorial verdict — 4.1/5
For the money, the TSKAU10YL is a credible way to put a durable, brightly identifiable LOTO padlock in every crew member's hand — provided you verify the keying matches how your program issues locks.VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are accurate as of the date shown and are subject to change. Full affiliate disclosure.

Who it is for

• Maintenance crews needing to issue a personal lockout padlock to every technician in one budget order
• Construction contractors whose LOTO program assigns yellow to outside or visiting crews
• Safety managers standardizing a color per shift or department who want low per-lock cost across lockout/tagout devices
• Facilities teams replenishing worn or lost padlocks in an existing color-coded program — see how to choose a lockout padlock
• Smaller employers building a first compliant lockout kit on a tight equipment budget who should also stock lockout tags and hasps

What the TRADESAFE TSKAU10YL Yellow 10-Pack does well

Bulk economics that make full issuance realistic

The strongest argument for the TSKAU10YL is cost-per-lock. One lockout padlock per authorized worker is the foundation of OSHA 1910.147, and a ten-pack at economy pricing removes the budget excuse for under-issuing. It is the same crew-equipping logic as the sibling TRADESAFE TS1KD10R red 10-pack.

Color-coding that does real program work

Yellow is one of the most widely assigned LOTO colors in North American programs — commonly designated for contractors, general maintenance, or a specific shift. A standardized, instantly identifiable color is exactly what the standard asks of a lockout device, and it lets a lockout/tagout program tell crews apart at a glance on a shared isolation point.

Lightweight aluminum for daily carry

The aluminum body keeps each lock light on a tool belt across a long shift and resists corrosion in field conditions. That puts it in the same weight class as the ABUS 2ALHB/40-75 aluminum body and Brady SafeKey aluminum, without their price.

Deployable out of the box

Each lock ships with its key(s), so the pack is ready to issue immediately — no separate keying order. Pair the padlocks with hasps for group lockout and lockout tags to identify the worker, following how to perform LOTO.

Where the TRADESAFE TSKAU10YL Yellow 10-Pack falls short

Keying configuration isn't spelled out

The listing states 'functional keying' and 'keys included' but does not explicitly confirm keyed-different (each lock its own unique key) versus keyed-alike (one key opens the set). For personal energy control under OSHA 1910.147, each worker must control the only key to their own lock — so confirm this before issuing. A stated keyed-different pack like the ABUS 74/40 or TRADESAFE TS1KD10R avoids the ambiguity.

No published shackle clearance

The spec gives no shackle diameter or vertical clearance, so fit on deep, thick, or stacked lockout hasps is unverified. If you lock through scissor hasps or stacked devices, a stated long-shackle lock such as the ABUS 2ALHB/40-75 is the safer pick.

Not stated as non-conductive

The aluminum body is not described as dielectric. For electrical isolation under 1910.333, don't assume non-conductive — a listing that explicitly states it, like the ABUS 74/40 thermoplastic body, is the right tool. Review how to choose a lockout padlock for the electrical case.

TRADESAFE TSKAU10YL Yellow 10-Pack vs the competition

Compare prices on Amazon →TRADESAFE TSKAU10YL Yellow 10-Pack on AmazonTRADESAFE TS1KD10R

When to step up from the TRADESAFE TSKAU10YL Yellow 10-Pack

If your program needs the keying nailed down in writing, step up to a pack that states it. The TRADESAFE TS1KD10R red 10-pack is the closest sibling — same aluminum economy format, but explicitly keyed-different. For electrical isolation, the ABUS 74/40 keyed-different 10-pack adds a non-conductive thermoplastic body. And where weight, cylinder feel, and finish matter most, the Brady SafeKey aluminum line is the premium per-worker choice across the lockout padlocks range.

Category context

A grounded, OSHA-1910.147-framed review of the TRADESAFE TSKAU10YL yellow aluminum LOTO 10-pack for budget crew issuance.

Total cost of ownership

Total cost of ownership favors the multi-pack. Because the TSKAU10YL spreads cost across ten lockout padlocks, the per-lock price is low enough to absorb the routine losses and damage that come with daily field use — locks get cut off, dropped, or walk away, and a budget pack makes replacement painless without raiding the safety budget. Aluminum bodies resist corrosion, which extends service life in damp or outdoor environments, though a value-tier cylinder won't have the longevity of a Brady SafeKey over many years. Plan replenishment as a standing line item, stage spares at your lockout stations, and keep tags restocked from lockout tags. For the full device picture, browse lockout/tagout devices.

Final verdict

Buy the TSKAU10YL if your priority is equipping a full crew with bright, identifiable yellow lockout padlocks at the lowest practical cost — contractor and designated-shift programs are its sweet spot. If you need the keying confirmed in writing for strict per-worker personal control, choose the explicitly keyed-different TRADESAFE TS1KD10R or ABUS 74/40. For electrical isolation, prioritize a stated non-conductive body; for deep or stacked hasps, a long-shackle lock like the ABUS 2ALHB/40-75; and when geometry defeats a padlock, the QWORK QS8899 cable locks. Ground your selection in how to choose a lockout padlock.

VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

TRADESAFE TSKAU10YL Yellow 10-Pack FAQ

Is the TRADESAFE TSKAU10YL keyed-different or keyed-alike?

The listing states keys are included with each lock and references functional keying, but it does not explicitly confirm keyed-different versus keyed-alike. Because that distinction is critical for personal energy control under OSHA 1910.147, confirm it before issuing. If you need a stated keyed-different pack, the TRADESAFE TS1KD10R or ABUS 74/40 spell it out.

Does this 10-pack meet OSHA 29 CFR 1910.147?

A standardized, durable, identifiable lockout padlock issued one-per-worker is exactly what the standard calls for, and bright yellow color-coding satisfies the identifiability requirement. The one open item is keying: personal control requires each worker to hold the only key to their own lock. Read what is lockout/tagout and confirm the keying configuration first.

What does the yellow color mean in a LOTO program?

Color is assigned by each facility's program, but yellow is one of the most widely used LOTO colors in North America — commonly designated for construction contractors, general maintenance, or a specific shift or department. The point is consistent, standardized assignment so crews are distinguishable on a shared hasp. See how to choose a lockout padlock for color-coding guidance.

How does the TSKAU10YL compare to the TRADESAFE TS1KD10R red set?

They are siblings in the same economy aluminum format, but the red TS1KD10R explicitly states keyed-different, while the yellow TSKAU10YL does not confirm its keying. If your only deciding factor is confirmed unique keys, the red set is the safer pick; if you specifically need yellow color-coding, this set fits.

Is the TSKAU10YL safe for electrical lockout?

The body is aluminum and the listing does not describe it as non-conductive, so do not assume dielectric performance for electrical isolation under 1910.333. For confirmed electrical use, choose a lock with a stated non-conductive body such as the ABUS 74/40 thermoplastic 10-pack. Browse lockout padlocks and verify the spec.

Can I use these padlocks for group lockout?

Yes — for group lockout, multiple workers each apply their own padlock to a lockout hasp installed on a single isolation point, so equipment can't be re-energized until every lock is removed. The TSKAU10YL supplies the padlocks; you add hasps and lockout tags. See how to perform LOTO.

How many locks should each worker get?

Under personal energy control, each authorized worker applies and controls their own lock on each isolation point they're exposed to, so a worker servicing several points may need several locks. A ten-pack lets you issue generously without budget strain. For multi-point single-worker control, a keyed-alike approach can help — review how to choose a lockout padlock.

Is a padlock enough, or do I need a hasp and tag too?

The padlock isolates one point; a hasp enables multiple workers on one point, and a lockout tag identifies the worker and reason. A tag is not an energy-isolating device on its own — see lockout vs tagout. Most programs stock all three from lockout/tagout devices.

What if a padlock won't fit the equipment?

Some isolation points — valve wheels, oversized switches, irregular geometry — can't take a rigid padlock-and-hasp. For those, a cable lockout such as the QWORK QS8899 routes a flexible cable around the obstruction. Plug-style hazards use plug lockouts.

How does this set compare to Brady SafeKey aluminum locks?

The Brady SafeKey aluminum line is a premium platform with stated keyed-different configurations and refined cylinder feel, sold mostly as singles. The TSKAU10YL trades that polish for bulk economy. Choose Brady when per-worker quality and confirmed keying are the priority; choose the TRADESAFE pack to equip a crew cheaply.

Is aluminum durable enough for daily LOTO use?

Aluminum is lightweight and corrosion-resistant, which suits daily tool-belt carry and damp environments, and it's the same body material used by premium options like the ABUS 2ALHB/40-75. A value-tier cylinder won't last as long as a top-shelf lock, but multi-pack pricing makes replacement easy. Stage spares at your lockout stations.

Will these fit a thick or stacked hasp?

The listing publishes no shackle diameter or clearance, so deep, thick, or stacked hasp fit is unverified. If you regularly lock through scissor hasps or stacked devices, pick a stated long-shackle lock like the ABUS 2ALHB/40-75 instead, and confirm dimensions against your hardware.

Is the TSKAU10YL a good first LOTO purchase for a small employer?

It's a reasonable starting point for the padlock layer because it equips a full crew cheaply, but a first program also needs hasps, tags, and a stocking plan. Consider pairing it with a personal LOTO kit for the staging gear, and read what is lockout/tagout to build the procedure.

Can one key open all ten locks in this pack?

That depends on the keying configuration, which the listing does not explicitly state. A keyed-alike set shares one key (suited to a single worker managing multiple points), while keyed-different gives each lock a unique key (required for per-worker personal control). Confirm before purchase if your program depends on one or the other — compare the stated-spec ABUS 74/40.

How does it compare to single-lock options like the Master Lock 410GRN?

The Master Lock 410GRN and American Lock A1107R are single safety padlocks best for replenishing one color or one worker, often chosen for brand recognition. The TSKAU10YL is a bulk play: lowest cost to equip many workers at once in yellow. Match the format to whether you're replenishing or outfitting a crew.

What's the best way to manage the spare keys?

Per program best practice, master or spare keys should be kept in a single controlled location accessible only to authorized personnel — not carried by the worker, which would defeat personal control. Document key control in your written procedure; see how to perform LOTO. Stage working locks and spares at your lockout stations.

Where does this pack fit among the lockout padlocks WC Safety carries?

It's the budget, color-coded crew-equipping option in the lockout padlocks collection. Above it sit confirmed-keying packs like the TRADESAFE TS1KD10R and ABUS 74/40, and premium singles like Brady SafeKey. Browse the full lockout/tagout range to round out a program.