Is the TRADESAFE TS1KD10R the right lockout/tagout padlock pack for issuing a full maintenance crew at once?

Short answer: If you need to put a compliant personal lock in every technician's hand without blowing the safety budget, yes — the TS1KD10R's ten keyed-different red aluminum lockout padlocks are purpose-built for crew issuance under OSHA 1910.147. Buy it when you want one unique key per worker at the lowest practical per-lock cost; look at single keyed-alike padlocks instead if one person manages many isolation points. Compare it against the ABUS 74/40 10-pack if you specifically need a non-conductive body.

TRADESAFE TS1KD10R Lockout Tagout Locks — 10-Pack Red Keyed Different Review (2026)

In a lockout/tagout program, the padlock is the device that physically holds an energy-isolating point — a breaker, valve, or disconnect — in the safe position so equipment cannot be re-energized while a worker is exposed. The TS1KD10R is not a niche or specialty tool; it is the workhorse lockout padlock you stock by the box and hand out so every authorized employee can perform LOTO correctly. Because it ships keyed-different, each of the ten locks carries its own unique key, which is exactly what OSHA's one-worker-one-lock-one-key model demands. Position it as the padlock layer of a broader kit that also includes hasps for group lockout, tags for worker identification, and stations to stage it all — see the full lockout/tagout devices range for the surrounding hardware.

Editorial verdict — 4.2/5
At roughly a tenth of single-lock pricing per unit, the TS1KD10R is the most cost-effective way to put a correctly keyed-different personal lock on every technician — provided your environment doesn't demand a heavier steel body or a stated dielectric rating.VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are accurate as of the date shown and are subject to change. Full affiliate disclosure.

Who it is for

• Maintenance crews that need to issue every technician their own compliant personal lock — the core use case for this 10-pack of lockout padlocks
• Safety managers standardizing a facility on red personal locks and building out the rest of the lockout/tagout program
• Facilities teams stocking lockout stations who want a uniform, budget-friendly padlock to refill them
• Contractors and multi-shift operations equipping rotating crews who each need their own unique key
• Plant electricians performing routine de-energization who want a lightweight lock for daily carry — though see the dielectric note before live electrical work in our how to perform LOTO guide

What the TRADESAFE TS1KD10R does well

Keyed-different control is correct by default

Each of the ten locks opens with its own unique key, so no worker can release another worker's lock. That is the foundation of compliant personal energy control under OSHA 1910.147, and the TS1KD10R delivers it without you having to specify keying — exactly what our how to choose a lockout padlock guide recommends for per-worker issuance.

Crew economics are the real draw

Buying ten lockout padlocks as one economy pack drops the per-unit cost far below single-lock pricing, which is what makes full individual issuance affordable. For a maintenance department equipping a whole shift, this is the line item that makes doing LOTO right practical.

Red is the right color for a default safety lock

Red is the universal LOTO warning color and the most commonly specified safety padlock color in North America, so any worker — including unfamiliar contractors — recognizes it on a hasp as a lockout device, not a security lock. For multi-crew color-coding you can layer in the yellow TSKAU10YL set or a green Master Lock 410GRN.

Lightweight for all-day carry

Aluminum keeps each lock light on a tool belt, which matters when a technician carries several across a shift. It's the same weight rationale behind aluminum platforms like the Brady SafeKey blue, without the premium per-unit cost.

Where the TRADESAFE TS1KD10R falls short

No stated dielectric rating

The listing describes aluminum construction but does not claim a non-conductive or dielectric rating, so we won't either. For live electrical isolation under 1910.333, choose a padlock that explicitly states a non-conductive body — the ABUS 74/40 is sold as non-conductive thermoplastic, which the TS1KD10R is not.

Lighter-duty than a steel body

Aluminum trades ruggedness for weight. In high-abuse or corrosive settings a steel-bodied safety padlock such as the Master Lock 410GRN or American Lock A1107R will outlast it; choose by environment in our how to choose a lockout padlock guide.

Keyed-different is not always what you want

If a single authorized employee manages many isolation points, ten unique keys becomes a key-management chore — a keyed-alike lock like the ABUS 2ALHB/40-75 suits that job better. Match keying to the worker model, as covered in lockout vs tagout.

It's the padlock layer only

Ten locks don't make a compliant program on their own. You still need hasps for group lockout, tags to identify each worker, and ideally a station to stage everything.

TRADESAFE TS1KD10R vs the competition

Compare prices on Amazon →TRADESAFE TS1KD10R on AmazonABUS 74/40 10-Pack

When to step up from the TRADESAFE TS1KD10R

If your work involves live electrical isolation, step up to the ABUS 74/40 10-pack: it's the same keyed-different, ten-lock crew format, but its thermoplastic body is sold as non-conductive — a property the TS1KD10R does not claim. If you instead need a single, more rugged padlock for a specific trade and value brand recognition on the hasp, the steel-bodied Master Lock 410GRN or American Lock A1107R are the upgrades. And if one employee secures deep or stacked hasps across several isolation points, the long-shackle ABUS 2ALHB/40-75 reaches where a standard shackle can't. Browse the full lockout padlocks range to match body material and keying to your environment.

Category context

Three choices decide whether a lockout device fits your program. First, device type: a padlock like the TS1KD10R holds a single isolation point per worker; a hasp lets several workers each apply their own lock to one point for group lockout; a cable lock wraps geometry a rigid hasp can't span; and a station stages all of it. A tag identifies the worker but is not itself an energy-isolating device — the lock is. Second, keying: keyed-different (this pack) gives every worker a unique key for true personal control, while keyed-alike opens a set with one key for a single employee managing multiple points. Third, personal vs group lockout: the TS1KD10R is built for the personal model — one worker, one lock, one key — and pairs with hasps when a job needs the group model. Our lockout vs tagout and what is lockout/tagout guides explain where each fits.

Total cost of ownership

The economics here are the whole pitch. As an aluminum lockout padlock sold in a 10-pack, the TS1KD10R lands at a fraction of single-lock pricing per unit, so equipping a full crew is a single affordable line item rather than ten separate buys. The trade-off is durability: aluminum is lighter and easier to carry but won't take the abuse a steel body like the Master Lock 410GRN shrugs off, so in harsh environments factor a shorter replacement cycle into total cost of ownership. Because it's keyed-different, budget for controlled storage of ten unique keys and a documented duplicate-key policy, as our how to perform LOTO guide outlines. Stock the pack alongside tags and a station so refills stay uniform, and reorder the same SKU to keep your fleet standardized.

Final verdict

For most maintenance and facilities teams that simply need to put a compliant personal lock in every worker's hand, the TRADESAFE TS1KD10R is the right call — ten keyed-different red lockout padlocks at the lowest practical per-lock cost. If your crews work live electrical and need a stated non-conductive body, choose the ABUS 74/40 instead. If you want steel ruggedness or brand recognition on a single trade's lock, go with the Master Lock 410GRN or American Lock A1107R. And if one employee spans deep or stacked hasps, the long-shackle ABUS 2ALHB/40-75 is the better tool. Whatever you pick, build the rest of the program from the full lockout/tagout devices range.

VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

TRADESAFE TS1KD10R FAQ

Is the TRADESAFE TS1KD10R OSHA compliant?

Yes — as a keyed-different set of personal lockout padlocks it directly supports the one-worker-one-lock-one-key control required by OSHA 29 CFR 1910.147. Each of the ten locks has a unique key so only the worker who applied a lock can remove it. Compliance also depends on using it within a written program, as described in our how to perform LOTO guide.

What does keyed-different mean, and why does it matter here?

Keyed-different (KD) means every lock in the pack opens with its own unique key, with no key crossover across the ten. That is what makes the TS1KD10R suitable for issuing one lock per worker, since no one can release another worker's lock. If you instead want one key to open a whole set, you'd choose keyed-alike — our how to choose a lockout padlock guide explains the difference.

When should I choose keyed-alike instead of this keyed-different pack?

Choose keyed-alike when a single authorized employee manages multiple isolation points and doesn't want to juggle several keys. A keyed-alike lock such as the ABUS 2ALHB/40-75 lets that one worker open all their locks with one key. For per-worker personal control across a crew, the keyed-different TS1KD10R is the correct format.

Is the TS1KD10R safe for electrical lockout?

The listing describes an aluminum body but does not state a dielectric or non-conductive rating, so we don't recommend assuming it is safe for live electrical isolation. For work under 1910.333 where a non-conductive lock is called for, the ABUS 74/40 is sold as a non-conductive thermoplastic body. Always confirm the device rating against your electrical safety procedure.

How does the TS1KD10R compare to the ABUS 74/40 10-pack?

Both are ten-lock keyed-different packs built for crew issuance, but the bodies differ: the TS1KD10R is aluminum and the ABUS 74/40 is non-conductive thermoplastic. Pick the ABUS if you need a stated non-conductive lock for electrical work; pick the TRADESAFE for the lowest per-lock cost when a dielectric rating isn't required. See both in our lockout padlocks collection.

How is it different from the TRADESAFE TSKAU10YL yellow set?

They share the aluminum 10-pack format from the same brand, but the TSKAU10YL is yellow and supplied keyed-alike, while the TS1KD10R is red and keyed-different. Use red keyed-different for default per-worker personal control, and reach for the yellow set when color-coding a separate crew, shift, or department.

Do I still need hasps if I buy this padlock pack?

Yes, whenever a job requires group lockout. A padlock secures one isolation point for one worker; a lockout hasp lets multiple workers each apply their own lock to a single point so the equipment can't be re-energized until everyone is clear. The TS1KD10R is the padlock layer that clips into those hasps.

Is a lockout tag enough on its own, or do I need the lock?

A tag identifies the worker and communicates the hazard, but it is not an energy-isolating device — it cannot physically prevent re-energization. The lock does that. Use the TS1KD10R padlock together with a lockout tag; our lockout vs tagout guide explains why lockout is the primary method.

How many locks do I actually need per worker?

At minimum, one lock per authorized worker per isolation point they control simultaneously. Many technicians carry several so they can lock multiple points during one job. Buying the ten-pack gives a crew immediate coverage and a small buffer — see how to perform LOTO for sizing your fleet.

Why is the TS1KD10R red instead of another color?

Red is the universal LOTO warning color and the most widely specified safety padlock color in North American industry, so it reads instantly as a lockout device on a hasp. If your program color-codes crews, you can add other colors — for example a green Master Lock 410GRN or the yellow TRADESAFE set — while keeping red as the default.

Is aluminum durable enough for a lockout padlock?

Aluminum is plenty durable for everyday maintenance use and has the advantage of being light for all-day carry. In high-abuse, high-impact, or corrosive environments, a steel body like the American Lock A1107R will hold up longer. Match the body material to your environment using our how to choose a lockout padlock guide.

Should I buy the 10-pack or individual padlocks?

If you're equipping more than a handful of workers, the 10-pack is far more economical per lock and standardizes your fleet on one SKU. Individual single padlocks make sense only for one-off replacements or when you need a specific feature like a long shackle or a non-conductive body. Browse single options in the lockout padlocks collection.

Can I use the TS1KD10R for cable lockout points?

No — a padlock secures a hasp or a lock hole, not the irregular geometry of a valve wheel or oversized switch. For those points you need a cable lockout, such as the QWORK QS8899 cable locks. Many programs stock both: padlocks for hasps and cable locks for everything else.

Where should I store the keys for a keyed-different set?

Each worker keeps sole control of their own lock's key during a lockout. Duplicate or spare keys should be stored in a controlled, documented location per your program's policy, not left accessible on the floor. A lockout station is a common place to organize keys, tags, and spare devices.

Does the TS1KD10R come with everything I need for a compliant program?

It supplies the padlock layer only. A complete personal LOTO setup also needs hasps, tags, and often a station or pouch to carry them. If you want a ready-made personal pouch instead of building from parts, look at a kit like the Brady 123143 personal safety kit.

How does this pack fit into building a LOTO program from scratch?

Start with the energy-control procedure in how to perform LOTO, then equip each authorized worker with a personal lock — this is where the TS1KD10R fits — and add hasps, tags, and a station for the full setup. The what is lockout/tagout guide covers the fundamentals, and the lockout/tagout devices collection has the surrounding hardware.

What's the honest weakness of the TS1KD10R?

Two things: the aluminum body is lighter-duty than steel, and there's no stated dielectric rating, so it isn't the lock to assume for live electrical isolation. For a budget crew-issuance padlock used on mechanical isolation points it's an excellent value; for harsh environments or electrical work, step up to a steel or non-conductive option as covered in our how to choose a lockout padlock guide.