Skip to content
Industrial Safety Equipment, PPE Guides & Reviews
Industrial Safety Equipment, PPE Guides & Reviews
Moldex 6632 Meteors Corded Earplugs — NRR 28 product photo

Moldex 6632 Meteors Small Review: Corded — 100-pair box NRR 28

WC Safety Editorial Verdict: 4.2/5

The Moldex 6632 Meteors Small Corded earns a solid editorial score as a purpose-built niche product: it is the only Moldex corded plug that pairs a genuinely smaller-diameter, bell-shaped foam body with a tether cord, making it the correct answer for narrow-ear-canal workers in FOD-prevention or cord-mandate facilities. The NRR 28 (about 10.5 dB(A) effective after OSHA's enforcement 50% safety factor) is honest and adequate up to roughly 100 dB(A) TWA single-protector, but it trails the NRR 33 standard-diameter Meteors, so it is a fit-driven choice rather than a maximum-attenuation one. If the standard size seals well, a higher-NRR option from our foam ear plugs range will protect more; reach for the 6632 specifically when small-canal fit is the deciding factor and a cord is required.

Moldex 6632 Meteors Small Corded NRR 28 — Smaller Ear Canal Fit with Tether Cord for FOD-Mandate and Cord-Mandate Programs

The Moldex 6632 Meteors Small Corded combines the smaller-diameter bell-shaped foam of the Moldex 6630 Meteors Small with a tether cord — delivering the correct anatomical fit for narrow ear canals in facilities that mandate corded hearing protection for FOD-prevention or policy compliance. NRR 28. High-visibility lime. 100 pairs per box. Made in USA. This review covers the 6632's combined sizing and cord advantages, OSHA 29 CFR 1910.95 compliance, NRR 28 attenuation, and selection guidance within the Meteors family.

Editorial Verdict — 4.2 / 5

The Moldex 6632 is the corded small-diameter variant of Moldex Meteors — NRR 28, lime, bell-shaped, tethered. The only Moldex option for workers with narrow ear canals in cord-mandate facilities. For uncorded small, see Moldex 6630. For standard-diameter corded, see Moldex 6970.

VIEW ON WC SAFETY Check Price on Amazon →

Pros
  • Only Moldex corded option for narrow ear canal workers — fills a specific fit gap
  • NRR 28 — 10.5 dB(A) effective; covers up to ~100.5 dB(A) TWA single-protector
  • Tether cord prevents earplug loss into product streams or machinery
  • Bell-shaped foam — easier insertion in narrow canals vs. flat-ended cylindrical
  • High-visibility lime — confirms wear compliance from distance
  • Made in USA; EPA-labelled NRR
Cons
  • NRR 28 — limited protection above ~100.5 dB(A) TWA single-protector
  • 100 pairs per box — higher per-pair cost than uncorded 200-pair box
  • Cord not metal-detectable — not suitable for food/pharma metal detection programs
  • Requires fit evaluation to confirm small size is anatomically indicated

Product Specifications: Moldex 6632 Meteors Small Corded

Specification Value
Model Number Moldex 6632
NRR 28 dB
Format Bulk box, 100 pairs, corded
Size Small diameter
Foam Shape Bell-shaped, tapered tip
Color High-visibility lime green
Cord Yes — tether cord, not metal-detectable
EPA NRR labelling EPA 40 CFR Part 211 Subpart B
Country of Origin USA (Covina, CA)
Standard ANSI/ASA S3.19

NRR 28 Effective Protection Calculations

Workplace TWA OSHA's enforcement 50% safety factor Effective Exposure OSHA Compliant?
85 dB(A) −10.5 dB(A) 74.5 dB(A) Yes
90 dB(A) −10.5 dB(A) 79.5 dB(A) Yes
95 dB(A) −10.5 dB(A) 84.5 dB(A) Yes
100 dB(A) −10.5 dB(A) 89.5 dB(A) Yes (near PEL)
105 dB(A) −10.5 dB(A) 94.5 dB(A) Dual protection required

Frequently Asked Questions: Moldex 6632 Meteors Small Corded NRR 28

Q: What is the NRR of the Moldex 6632 Meteors Small Corded?

A: The Moldex 6632 has an NRR of 28 dB. Per OSHA's enforcement 50% safety factor, effective attenuation is approximately 10.5 dB(A), covering environments up to approximately 100.5 dB(A) TWA for single-protector compliance.

Q: What is the difference between the Moldex 6632 and Moldex 6630?

A: Both use the same NRR 28 small-diameter bell-shaped lime foam. The Moldex 6630 is uncorded (200 pairs/box); the Moldex 6632 adds a tether cord (100 pairs/box) for FOD-prevention and cord-mandate facilities.

Q: Is the Moldex 6632 cord metal-detectable?

A: No. The Moldex 6632 cord is not metal-detectable. For food processing or pharmaceutical programs requiring metal-detectable corded earplugs, use the Moldex 6615 SparkPlugs Metal Detectable Corded (note: standard diameter).

Q: Is the Moldex 6632 NIOSH approved?

A: No. Hearing protectors are not NIOSH-approved - NIOSH approves respirators. The NRR label on the Moldex 6632 is required by the EPA under 40 CFR Part 211 Subpart B, tested per ANSI S3.19-1974.

Q: Are Moldex 6632 earplugs made in the USA?

A: Yes. The Moldex 6632 is manufactured in Covina, California.

Q: What is the Moldex 6632 suitable for that the Moldex 6970 is not?

A: The Moldex 6632 is specifically for workers with narrow ear canals in cord-mandate facilities. The Moldex 6970 Meteors Corded is the equivalent for standard ear canal anatomy, delivering NRR 33.

Q: How do I determine if a worker needs Moldex 6632 vs. 6970?

A: Start with the Moldex 6970 standard corded. If the worker cannot achieve adequate fit (plug works loose, user seal check shows inadequate occlusion), switch to the Moldex 6632 small corded. Document the fit evaluation.

Q: What OSHA standard covers hearing protection in cord-mandate facilities?

A: OSHA 29 CFR 1910.95 governs hearing conservation program requirements. Cord mandates are typically facility-specific FOD prevention policies rather than OSHA-mandated requirements. However, the employer's HCP must still ensure that required hearing protection (including corded options) provides adequate attenuation for the noise exposure levels present.

Q: Does the cord affect NRR or attenuation performance?

A: No. The cord does not affect the acoustic properties of the foam. The Moldex 6632 achieves the same NRR 28 as the uncorded Moldex 6630.

Q: How does the Moldex 6632 perform at 90 dB(A) TWA?

A: At 90 dB(A) TWA (OSHA PEL), the Moldex 6632 NRR 28, derated by OSHA's enforcement 50% safety factor, reduces effective exposure to 79.5 dB(A) — well within compliance for an 8-hour TWA.

Q: What is the NIOSH derating for the Moldex 6632?

A: NIOSH keeps 50% of (NRR - 7) for formable foam, which is the same arithmetic as OSHA's (NRR - 7)/2 estimate: (28−7)/2 = 10.5 dB(A) effective. For exposures above approximately 95.5 dB(A) TWA, NIOSH guidance recommends dual protection even with a correctly-fitted Moldex 6632.

Q: What other Moldex corded earplugs should I compare to the 6632?

A: Compare the Moldex 6632 against: Moldex 6970 (NRR 33, standard, corded), Moldex 6622 (NRR 33, eco, corded), Moldex 6609 (NRR 33, camo, corded), and Moldex 6615 (NRR 33, metal-detectable, corded).

Q: Can I use Moldex 6632 for dual protection?

A: Yes. For environments above 100 dB(A) TWA, combine the Moldex 6632 with compatible earmuffs. Add 5 dB to the higher NRR value per OSHA guidance on dual protection.

Q: Why would a facility choose 6632 over 6630 for its workers?

A: If the facility has a FOD-prevention or cord-mandate policy, the Moldex 6632 is required for small-canal workers. Without a cord policy, the uncorded Moldex 6630 is lower cost-per-pair at 200 pairs/box.

Q: Where can I buy Moldex 6632 Meteors Small Corded earplugs?

A: The Moldex 6632 is reviewed on WC Safety. Also on Check Price on Amazon →.

Q: Does the 6632 satisfy OSHA variety requirements for hearing protectors?

A: Offering the Moldex 6632 alongside standard-diameter options like the Moldex 6970 and Moldex 6608 Camo Plugs Uncorded helps satisfy OSHA 29 CFR 1910.95(i) variety requirements by providing fit options for different canal anatomies.

Citations: OSHA 29 CFR 1910.95 (Occupational Noise Exposure / Hearing Conservation Amendment); ANSI/ASA S3.19 (Method for the Measurement of the Real-Ear Attenuation of Hearing Protectors); NIOSH Publication No. 98-126 (Criteria for a Recommended Standard: Occupational Noise Exposure); EPA 40 CFR Part 211, Subpart B (Hearing Protector Device Labeling).

Disclosures & editorial standards
WC Safety participates in the Amazon Services LLC Associates Program. Outbound Amazon links are affiliate links. We accept no manufacturer payment, sponsorship, or product samples. This content is not medical, legal, or regulatory advice. Safety equipment selection is governed by applicable OSHA standards and your facility's safety program.

Pros & Cons

Pros
  • Only Moldex corded plug with a true smaller-diameter bell-shaped foam body, so it seals narrow ear canals that flat-tipped standard plugs work loose from
  • NRR 28 (about 10.5 dB(A) effective at OSHA 50% derate) covers most general-industry noise up to roughly 100 dB(A) TWA single-protector
  • Tether cord keeps a removed plug from dropping into product streams or machinery, satisfying FOD-prevention and cord-mandate policies
  • High-visibility lime body lets supervisors confirm wear compliance from a distance during walkthroughs
  • Made in USA (Covina, CA) and EPA-labelled under 40 CFR Part 211 Subpart B
  • Single-use disposable foam means no cleaning regimen and a fresh, hygienic pair every shift
Cons
  • NRR 28 is lower than the NRR 33 standard-diameter Meteors, so it is not the pick when maximum attenuation matters more than small-canal fit
  • 100-pair corded box carries a higher cost-per-pair than the uncorded 6630 200-pair box or non-corded bulk foam
  • Cord is not metal-detectable, so it is unsuitable for food and pharmaceutical metal-detection programs
  • Disposable foam offers no reuse, unlike washable flanged reusable earplugs, raising long-term consumable spend for daily wearers
  • Smaller diameter is wasted (and may reduce seal) on workers with average or large ear canals, so it requires a fit check before standardizing on it

Who It's For

Buy it if:

  • Workers with narrow ear canals who cannot get a reliable seal from standard-diameter foam plugs
  • Facilities with a corded or FOD-prevention mandate (food-adjacent, aerospace, machining) that still need a small-canal fit option
  • Hearing conservation programs under OSHA 1910.95 that must offer fit variety across different ear anatomies
  • Buyers who want a single-use, no-cleaning disposable plug rather than a washable reusable
  • Environments at or below roughly 100 dB(A) TWA where NRR 28 single-protector is sufficient

Look elsewhere if:

  • Workers with average or large ear canals, who seal better and protect more with standard-diameter NRR 33 plugs
  • Food-processing or pharmaceutical lines requiring metal-detectable cords
  • Teams chasing the lowest cost-per-pair, who are better served by uncorded bulk foam or a reusable plug for daily wearers
  • Very high-noise tasks above ~100 dB(A) TWA that require dual protection or a higher-attenuation product

Frequently Asked Questions

Is the Moldex 6632 a single-use disposable or can I reuse it?

The 6632 is single-use disposable foam. Roll-down PU foam compresses and expands once cleanly; after a shift it picks up wax, debris and skin oils and loses some of its recovery, so the OSHA-aligned practice is one fresh pair per shift or sooner if soiled. If you want a washable, multi-week product instead, look at flanged designs in our reusable earplugs range rather than reusing the 6632.

Should I choose the foam 6632 or a reusable flanged earplug for the same worker?

Choose the foam 6632 when you want the highest comfort-to-fit for narrow canals, a disposable hygiene model, and a corded FOD option. Choose a reusable flanged plug when a single daily wearer would otherwise burn through many disposable pairs, or when you want a wipe-clean plug. The trade-off is foam usually attenuates more but is discarded daily; reusables cost more up front but last weeks. Compare options in our reusable earplugs collection and against general foam ear plugs.

How does the 6632 compare to the Moldex Pura-Fit for narrow ear canals?

Pura-Fit is a tapered standard-diameter foam plug with NRR 33, sized for average-to-large canals; the 6632 is a smaller-diameter bell shape at NRR 28 built specifically for narrow canals. If a worker cannot seat Pura-Fit without it backing out, the 6632 is the better anatomical fit even though its rated NRR is lower. Read the Moldex 6800 Pura Fit and corded Moldex 6900 Pura Fit corded reviews to weigh fit versus attenuation.

How does the 6632 stack up against the Moldex SparkPlugs line?

SparkPlugs are a contoured standard-diameter foam plug, available uncorded, corded and metal-detectable. They suit average canals and food/pharma metal-detect programs; the 6632 wins only on the narrow-canal fit and is not metal-detectable. For a corded comparison see the Moldex 6654 SparkPlugs corded, and for metal-detect needs the Moldex 6615 SparkPlugs metal detectable instead of the 6632.

Is NRR 28 enough, or should I step up to an NRR 33 plug?

After the OSHA 50% derate, NRR 28 yields about 10.5 dB(A) of real-world protection, comfortably covering general-industry exposures up to roughly 100 dB(A) TWA on a single protector. Step up to NRR 33 only if your noise survey shows higher TWA or you want more margin and the worker can still seal a standard-diameter plug. See our highest NRR ear plugs guide and confirm your target with what is NRR noise reduction rating explained.

How do I confirm the 6632's smaller size is right before standardizing on it?

Have the worker insert a standard-diameter plug first; if it seats fully and a user seal check (cupping the ears changes little) shows a good occlusion, the standard size is fine. If the plug works loose, sits shallow, or fails the seal check, the 6632 small is indicated. Document the result in the hearing conservation file. Our how to insert foam earplugs guide covers the roll-pull-hold technique that makes this assessment reliable.

Does the cord on the 6632 affect comfort or all-day wearability?

The acoustic foam is unchanged from the uncorded 6630, so in-ear comfort is identical; the cord adds a light tether across the neck that most wearers stop noticing. The bell shape and smaller diameter actually reduce canal pressure for narrow-canal users versus an oversized standard plug, which is the main comfort win here. For all-day high-noise tasks where any plug feels intrusive, weigh muffs using our ear plugs vs ear muffs comparison.

Is the 6632 corded plug good value compared with uncorded bulk foam?

Per pair, the corded 100-pair 6632 costs more than uncorded bulk foam because the cord adds material and the box holds fewer pairs. The value case holds only where a cord is required (FOD or policy) for a small-canal worker. If no cord mandate applies, uncorded foam from our disposable ear plugs range is cheaper per use; for daily single wearers a reusable can beat both on total cost.

When should I pick the 6632 over earmuffs for the same job?

Pick the 6632 when the worker needs a low-profile fit under hard hats or eyewear, works in heat where muff cushions get sweaty, or where a corded plug satisfies a FOD policy. Pick muffs for intermittent noise where workers put protection on and off frequently, or where consistent fit is hard to police. Our ear plugs vs ear muffs guide details the trade-offs for your task.

How does the 6632 compare to Moldex Softies for comfort-first programs?

Softies are a very low-pressure foam aimed at comfort-sensitive standard-diameter wearers at NRR 33; the 6632 trades a little of that across-the-board softness for a smaller diameter that actually seals narrow canals. If your comfort complaints come from a too-tight standard plug in small ears, the 6632 solves it; if they come from general pressure in average ears, the Moldex 6600 Softies or corded Moldex 6650 Softies corded may fit better.

Is the high-visibility lime color worth choosing over a discreet plug?

For program compliance, yes. The lime body lets a supervisor verify from across a floor that a worker is wearing protection, which supports OSHA 1910.95 enforcement and reduces unprotected-exposure citations. If you instead need a low-visibility option for non-industrial settings, that is a comfort/aesthetic preference outside this plug's purpose; the 6632's color is a deliberate safety-program feature.

Can I mix the 6632 small with standard-diameter plugs in one hearing program?

Yes, and you generally should. Offering the 6632 small alongside standard-diameter and muff options gives workers a fit choice across different canal anatomies, which is exactly the variety OSHA expects in a hearing conservation program. Stock it as the small-canal, corded line item; see our broader hearing protection range to round out the program.

How do I size my noise exposure to know if the 6632 is sufficient?

Run or obtain a noise dosimetry survey to get the worker's 8-hour TWA, then subtract the derated attenuation (about 10.5 dB(A) for NRR 28) to confirm the result lands at or below 85 dB(A). If your TWA is high enough that NRR 28 leaves little margin, move up the NRR scale or add muffs. Our how to calculate the NRR you need guide walks through the math for your numbers.

Is the 6632 a good general-purpose foam plug, or strictly a fit-gap product?

It is best understood as a fit-gap product: its reason to exist is small canals plus a cord. For a general workforce with mixed ear sizes and no cord mandate, a standard-diameter NRR 33 foam plug is the more versatile default. Use the 6632 to cover the workers a standard plug fails. To benchmark mainstream options first, see our best foam ear plugs guide.

If I need maximum attenuation in small canals, what should I compare against the 6632?

The 6632 caps at NRR 28 by design, so for higher attenuation you would compare a correctly-fitted standard NRR 33 foam plug (if the canal can seal one) or dual protection with muffs. There is no higher-NRR Moldex in the same small-diameter bell shape, so the practical ceiling for that anatomy is the 6632 plus muffs. Browse top-attenuation choices in our NRR 33 ear plugs collection before deciding.

Why trust WC Safety
Industrial PPE specialists. We do not accept manufacturer payment for placement.
Reviewed by
Steven Eaton, WC Safety Editorial — guidance reflects current OSHA, NIOSH and ANSI practice.
Our standards
Ratings combine published specs, hands-on familiarity, and verified customer data where available; we do not fabricate lab tests.
Affiliate disclosure
Some links are Amazon affiliate links (tag wcsafety04-20); purchases may earn us a commission at no cost to you.
Previous article Moldex 6683 Softies Review: Uncorded — 50-pair jar NRR 33
Next article Moldex 6630 Meteors Small Review: Uncorded — 200-pair box NRR 28

Leave a comment

* Required fields