MCR Safety PD2911 Predator Impact Gloves, HyperMax Cut + MAXGrid Review

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The MCR Safety PD2911 Predator Impact Gloves, HyperMax Cut + MAXGrid is a impact-resistant gloves from MCR Safety, listed on Amazon. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

Published July 16, 2026 · Last updated July 27, 2026

Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this product.

The MCR Safety PD2911 Predator impact gloves pair cut resistance with back-of-hand impact protection in one multi-task glove. A synthetic leather palm carries a black MAXGrid grid-pattern grip on the palm and fingertips, a HyperMax HPPE liner adds cut and puncture protection, and a fluorescent lime patented tire-tread TPR back provides ANSI/ISEA 138 Level 1 impact resistance. A hook-and-loop wrist closure with an ID panel completes the build.

As HyperMax HPPE cut gloves , the PD2911 is a cut-resistant Predator: the HPPE liner works behind the palm for cut and puncture protection, and the MAXGrid palm gloves grid pattern grips in dry, wet, and oily conditions. The fluorescent lime tire-tread TPR gloves back adds the Predator line's signature dorsal armor and keeps hands visible, making these a practical pair of Level 1 impact gloves for mixed handling tasks.

Where It Earns Its Slot

Where it earns its slot: Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this product.. The sections below test that positioning against the documented configuration, not against wishful thinking.

Honest Limits

Honest limits: glove ratings are per-hazard, not general toughness. Cut, puncture, abrasion, chemical, and thermal performance are separate tests, and this glove protects only on the axes its marking actually covers. Inspect for breaches and retire on damage — degraded gloves protect on paper only.

Pros and Cons

Alternatives in the Same Lane

• SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
• MCR Safety PD6901 Predator Impact Gloves
• MCR Safety PD4900 Predator Impact Gloves
• MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
• MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
• MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
• MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
• MCR Safety PD4971 Predator Impact Gloves
• MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im

Hand Protection Guides

• Cut-Resistant Gloves Complete Guide
• Best Cut-Resistant Gloves
• Best Impact-Resistant Gloves
• Nitrile Gloves Complete Guide
• Best Mechanics Gloves

Browse by Category

• Cut-Resistant Gloves
• Impact-Resistant Gloves
• Nitrile Gloves
• Leather Work Gloves
• Chemical-Resistant Gloves
• Mechanics Gloves

Frequently Asked Questions

General questions about ratings, OSHA limits and fit are answered in the Cut-Resistant Gloves Complete Guide guide.

The Bottom Line

Rated 4.6/5 on documented spec, configuration, and value. The MCR Safety PD2911 Predator Impact Gloves, HyperMax Cut + MAXGrid does the job its listing describes — the guides above tell you whether it's the right pick against the field.

Common questions

What does the MCR Safety PD2911 Predator Impact Gloves, HyperMax Cut + MAX listing actually document?

Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this product.…

What are the alternatives to the MCR Safety PD2911 Predator Impact Gloves, HyperMax Cut + MAX?

The sibling impact-resistant gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.

Sources. Requirements referenced here come from OSHA 29 CFR 1910 and the NIOSH recommendations. Where a consensus standard governs, the ANSI document is named in the text.

Related reference

Neighbouring references on this site: impact resistant gloves ansi isea 138, cut resistance glove levels explained: ansi/isea 105 a1 through a9, and cut-resistant vs impact-resistant gloves: what's the difference?.

Why trust WC Safety

WC Safety is an independent, affiliate-supported review site. It is not a retailer: it holds no inventory, takes no orders, and earns only from qualifying purchases through clearly marked links — which never changes what a product is rated to do. Standards language is taken from the regulation text directly, and ratings are reported as the manufacturer publishes them. We run no laboratory and perform no testing of our own. Where published sources disagree, we say so and plan on the conservative figure rather than the flattering one.

Our methodology

Figures come from the regulation and the published specification, in that order. Derated numbers are calculated, not estimated. Nothing here is presented as a measured result, because we measure nothing.

Researched and written by Steven Eaton, editor of WC Safety. Steven holds no safety certification and does not test products; this page compares what manufacturers and regulators publish, with the gaps in that record marked. Last reviewed August 2026.