How do I tell which safety toe this boot has, and does it change the protection?

Read the marking line stamped inside the boot rather than the product name. ASTM F2413 sets the SAME impact and compression thresholds whichever material is used, so a composite toe rated I/75 C/75 passed the identical test as a steel one. The material changes weight, cold transfer and whether it trips a metal detector - not the rated protection.

What do the ASTM F2413 markings on a safety boot mean?

The line carries the standard year, then M or F for the sex the boot was tested for, then the rated hazards. I/75 and C/75 are impact and compression - 75 foot-pounds and 2,500 pounds. EH is secondary electrical-hazard protection, PR is sole puncture resistance, Mt is metatarsal and SD is static-dissipative. A boot carries only the letters printed in it.

How do I confirm whether a boot is EH-rated?

Look for EH on the marking line inside the boot. Do not infer it from the brand, the category or the price. EH is SECONDARY protection against incidental contact with an open circuit on a dry floor - it degrades once the sole is wet, worn or has metal embedded in it, and it never substitutes for establishing a zero-energy state before the work starts.

How do I confirm whether a boot is waterproof?

Check the specification row on the listing, not the leather. Waterproof means a sealed membrane or a moulded rubber upper; water-RESISTANT means treated leather that wets out eventually. The two are different claims and only one survives a shift standing in water.

How does insulation interact with the safety toe?

Insulation and toe material interact: metal conducts cold to the toes faster than composite, which is the usual reason cold-weather crews move to a non-metallic toe. Whether a given boot is insulated, and to what gram rating, is on its own specification row.

What is metatarsal protection and how do I know a boot has it?

A safety toe protects only the toes; the instep above them is covered by a separate ASTM F2413 rating marked Mt. It matters where heavy objects are handled at foot height. Like every other rating, it is either on the marking line or the boot does not have it.

Is slip resistance part of the ASTM F2413 rating?

No - and this trips people up. Slip resistance is tested separately, commonly to ASTM F2913, so an 'oil-resistant outsole' and a tested slip-resistant rating are different claims. A boot can be fully F2413-rated and carry no slip-resistance test at all.

Does boot height affect the safety rating?

No. Height affects ankle support and how much debris gets in, not the ASTM rating. Six inches is the general-purpose default; taller shafts suit heavy debris, welding sparks or deep mud, and a taller boot is not a more protective one.

Does OSHA require safety-toe footwear for my job?

OSHA 29 CFR 1910.136 requires protective footwear where there is a danger of foot injury from falling or rolling objects, from objects piercing the sole, or from electrical hazards. The employer's hazard assessment decides; the standard names the condition, not the job title.

How do I size a safety toe correctly?

Size for the toe box, not the length alone. A safety toe does not stretch, so a boot that is half a size short will not break in - the cap keeps meeting the same spot. Fit late in the day in the sock you actually wear, with the widest part of the foot behind the cap.

When should a safety boot be replaced?

When the tread is worn smooth, when the safety toe has taken a real impact, when the upper has split at the flex point, or when an EH-rated sole has picked up embedded metal. A safety toe that has already absorbed one impact is not certified for a second.

What is the difference between this class and a soft-toe work boot?

A soft-toe boot carries no ASTM F2413 impact or compression rating at all. It may be built to the same durability, but it is not protective footwear under 1910.136 and will not satisfy a hazard assessment that calls for a safety toe.

Skechers Burgin-Tarlac Steel Toe EH Puncture-Resistant Work Boot

🔍 Click to zoom

View on Amazon

Skechers Burgin-Tarlac Steel Toe EH Puncture-Resistant Work Boot

Name: Skechers Burgin-Tarlac Steel Toe EH Puncture-Resistant Work Boot
Brand: Skechers
SKU: SBTSTW-8
Price: 56.7 USD
Availability: InStock

Skechers SKU: SBTSTW-8 Safety Footwear

$56.70

Final price set by Amazon · may vary

Size: 8

EDITORIAL REVIEW — Skechers Burgin-Tarlac Steel Toe EH Puncture-Resistant Work Boot Assessed on the standards the product is actually certified to and on how the format fits a working shift, by Steven Eaton, WC Safet...

Check Price on Amazon

🔒 Amazon Associate · You pay the same price · We earn a small commission

Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.

Curated SelectionExpert-chosen safety gear

Independently ReviewedUnbiased assessments — no manufacturer input

Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.

Electrical Hazard Boots Safety Footwear Skechers Steel Toe Boots

EDITORIAL REVIEW — Skechers Burgin-Tarlac Steel Toe EH Puncture-Resistant Work Boot

Assessed on the standards the product is actually certified to and on how the format fits a working shift, by Steven Eaton, WC Safety editor.

Editor's take: One of the lowest-cost ways into a steel toe with EH and puncture resistance — read the full Skechers Burgin-Tarlac review, or see the value picks in our best steel toe boots guide.

skechers burgin-tarlac steel toe eh puncture-resistant — what the listing actually specifies

Skechers Burgin-Tarlac Steel Toe Work Boot — Budget Light-Duty Value

A safety toe is impact and compression protection, not electrical isolation. ASTM F2413 treats them as separate ratings: only a boot carrying the EH mark is tested for secondary protection against open electrical circuits, and that protection is voided by wet soles, worn outsoles or embedded metal. Work on or near energised parts is controlled by a zero-energy state and the NFPA 70E arc-flash program first; footwear is the last layer, never the plan.

The Skechers Burgin-Tarlac steel toe work boot is the entry pick for a buyer who needs a genuine steel toe with an EH rating and puncture resistance without spending much. It is a light-duty boot — not waterproof, not a heavy welted last — but for dry warehouse and light-industrial floors it delivers a lot of certified protection for the price.

In this guide: Features · Specs · Fit & use · Compare · FAQ

The Burgin-Tarlac is a budget steel toe work boot with EH, puncture resistance, and a slip-resistant outsole, aimed at light-duty warehouse, stockroom, and general-labor buyers on a tight budget.

Key Features Buyers Ask About

best waterproof work boots
best work socks
footwear accessories
Steel safety toe — meets ASTM F2413 impact and compression; certified protection at an entry price.
Puncture-resistant plate — underfoot protection against nails and sharp debris; uncommon at this price.
Electrical-hazard rating — secondary protection on dry floors; more options in our electrical hazard boots guide.
Slip-resistant outsole — grip on smooth indoor surfaces; see more slip-resistant footwear.
Memory-foam comfort insole — cushioned out of the box; upgrade with a firmer work boot insole for more support.

Pros

Very low price for the feature set
Steel toe + EH + puncture resistance
Slip-resistant outsole
Cushioned memory-foam insole
Light and easy to break in

Cons

Not waterproof — dry floors only
Light-duty build, not for heavy trades
Steel toe reads colder in winter
Soft insole may need upgrading

Specifications

Spec	Detail
Safety toe	Steel toe, ASTM F2413 I/75 C/75
Puncture resistance	Yes — PR rated
Electrical hazard	Yes — EH rated
Waterproof	No — not waterproof
Outsole	Slip-resistant
Sizes	8–13 (US men's, incl. half sizes)

Jobs and Environments This Boot Fits

Consider the Burgin-Tarlac for light-duty warehouse, stockroom, retail-back-of-house, and general-labor work on dry floors where a steel toe, EH rating, and puncture resistance are required and the budget is tight. Because it is not waterproof and uses a light-duty build, skip it for wet outdoor work, heavy welded trades, or all-day rough terrain — for those, step up to a rated waterproof work boot or a heavier last. The puncture-resistant plate is a real advantage for floors with loose fasteners or debris.

Sizing and Fit Notes

Skechers work footwear runs close to true to size; most buyers order their normal Skechers size. If you wear a thick sock or want extra toe room ahead of the steel cap, size up a half. The memory-foam insole is soft, so if you stand all day you may prefer to swap in a firmer supportive insole. Our how to choose safety boots guide covers matching a budget last to your foot.

Skechers Burgin-Tarlac vs Skechers Longrider — Skechers Steel Toes

Model	Style	Extras	Best for
Burgin-Tarlac (this)	Lace-up boot	EH + puncture resistance	Lowest-cost certified value
Skechers Longrider Chelsea	Pull-on chelsea	EH	Laces-free convenience

Choose the Burgin-Tarlac for the lowest price and the added puncture-resistant plate. Pick the Skechers Longrider Chelsea if you want laces-free pull-on entry. Need a value steel toe work shoe? Compare the athletic Skechers Cankton, or the value Cat Footwear Wheelbase.

Frequently Asked Questions

You can check the current price on Amazon, or see the budget tier in our slip-resistant work shoes guide.

Why trust this Skechers Burgin-Tarlac page? WC Safety is an independent industrial PPE and workwear review site. We cover safety footwear and its accessories to safety managers, tradespeople, and procurement teams. Every rating on this page is cross-referenced against the manufacturer specification and the ASTM standards decoded in our ASTM F2413 safety footwear guide. Disclosed: WC Safety earns Amazon affiliate commissions on outbound clicks; that never changes the specs or the picks shown here.

By Steven Eaton, WC Safety Editorial — safety footwear desk; specialization: ASTM F2413/F2892 rating verification, toe-cap material selection, and job-matched work-boot fitment.
Last updated: July 4, 2026 · Sources reviewed: OSHA 29 CFR 1910.136, ASTM F2413-18 (impact/compression + EH + PR), Skechers product specification.
Editorial standard: No sponsored placement. No manufacturer input. Ratings verified against the published spec, never assumed.

How this page is maintained — We re-check the Skechers Burgin-Tarlac listing against OSHA 29 CFR 1910.136 and ASTM F2413-18 (and F2892-18 where a boot carries occupational EH) on every lineup change. Claims the manufacturer does not state are not published.

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases. Outbound product links to Amazon use our affiliate tag and are marked rel="sponsored nofollow noopener". This page is buyer guidance, not medical, legal, or regulatory advice — confirm site-specific PPE requirements with your safety officer.

What separates the models in this category is set out in best boot care products, best composite toe work boots, best insulated winter work boots.

Directly comparable options are grouped in ariat work boots, carhartt work boots, composite toe boots.

Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.

Related standards and selection guidance: best logger boots, best metatarsal boots, best photoelectric smoke detector 2026, best pull on work boots.

The rest of the range sits in keen utility work boots, metatarsal boots.

Brand / Vendor

Skechers

Model / SKU

SBTSTW-8

Product Type

Safety Footwear

Price

$54.28 (Amazon)

Availability

Check current availability on Amazon

🏷️

No Paid Placements

Every product earns its place based on safety credentials and field performance, not advertising spend.

🏭

Industrial Grade Only

Products sourced for professional use in manufacturing, construction, and industrial environments.

🔬

Compliance Verified

Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.

🏭

Sourced for Professionals

Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.

Verified Buyer Reviews

Customer Reviews

Share Your Experience

Write a Review

✓

Thank you for your review!

Your submission has been received and will be published after verification.