Safety Works 10006370 Anti-Fog OTG Clear Lens Safety Goggles

Safety Works 10006370 Anti-Fog OTG Clear Lens Safety Goggles

Impact protection and splash protection are different tests. ANSI Z87.1 rates spectacles for impact, but only a device marked for splash (D3) is evaluated against a chemical splash hazard; safety glasses with open sides do not qualify, and a face shield is a secondary protector worn over primary eye protection rather than instead of it.

The Safety Works Anti-Fog OTG Clear Lens (SKU: 10006370) are ANSI Z87.1-rated safety goggles designed to fit over prescription glasses, providing full-surround eye protection without removing your eyewear. Unlike safety glasses, goggles create a complete seal around the eye socket, blocking airborne particles, liquid splash, and chemical mist from reaching the eye from any angle. They meet the requirements of OSHA 29 CFR 1910.133 for eye and face protection in industrial, construction, laboratory, and chemical environments. Browse our full Safety Goggles collection to compare styles, or check current Amazon pricing: Safety Works Anti-Fog OTG Clear Lens on Amazon.

Read the full Safety Works 10006370 Anti-Fog OTG Clear Lens Safety Goggles review →

Safety Goggles vs. Safety Glasses

Safety glasses protect the front and sides of the eye but leave gaps where dust, splash, or vapors can enter from above, below, or the inner corners. Safety goggles form a continuous seal against the face, providing 360-degree protection around the eye socket. OSHA requires goggle-level protection for chemical splash, dust, fine particle, and optical radiation hazards where the direction of threat is not limited to the front. The Safety Works Anti-Fog OTG Clear Lens meets these requirements. See our full Safety Goggles collection or explore related protection: Safety Goggles collection safety glasses face shields full eye protection range hearing protection respirators 3M GoggleGear 500 Series GG501SGAF Uvex Stealth HydroShield S3960HS.

FAQ — Safety Works Anti-Fog OTG Clear Lens

Vendor: Safety Works | Model: 10006370 | ASIN: B085SRNKMQ | Type: Safety Goggles | Standard: ANSI Z87.1

The trade-offs behind this choice are worked through in amber vs clear lens safety glasses, anti fog safety glasses guide, anti fog vs anti scratch safety glasses, best face shields, best face shields for welding grinding and cutting.

The rest of the range sits in 3m safety glasses, 3m virtua safety glasses, anti fog safety glasses.

Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.

[{"q":"Do these goggles seal against splash and dust?","a":"Goggles are the sealing class of eye protection, which is what separates them from spectacles. Whether a specific model is rated for splash depends on its own Z87.1 marking - D3 for splash, D4 for dust, D5 for fine dust - so read the marking on the frame rather than assuming the format implies the rating."},{"q":"Can goggles be worn over prescription glasses?","a":"Only an OTG (over-the-glass) design is sized for it. Forcing a non-OTG goggle over glasses breaks the seal, which is the only reason to wear goggles rather than spectacles in the first place. OTG is stated on the listing and is usually visible in the frame depth - check it before ordering."},{"q":"What is the difference between Z87 and Z87+?","a":"Z87 is the basic impact rating; Z87+ adds the high-velocity impact test, in which a quarter-inch steel ball is fired at the lens. If the work involves grinding, chipping, nailing or anything that throws fragments, Z87+ is the one to look for."},{"q":"Do the markings tell me anything besides impact?","a":"Yes. Z87.1 marks the hazard each device was tested against: D3 splash, D4 dust, D5 fine dust, U for UV with a scale number, L for visible light filtering, W for welding with a shade number, and V for photochromic. A device carries only the letters it was tested for."},{"q":"How much does an anti-fog coating matter?","a":"More than most buyers expect: fogged eyewear gets pushed up onto the forehead, and eye protection on the forehead protects nothing. Coatings are consumable - aggressive cleaning and paper towels strip them - and Z87.1 marks a tested anti-fog performance level (N) separately from impact. Check the listing's own specification row for whether a given model carries one."},{"q":"What is the lens tint for and where should it not be used?","a":"Tint controls glare and light, not impact. A grey or smoke lens is for bright outdoor work, amber lifts contrast in low light, and indoor/outdoor is a light mirror for people moving between the two. A tinted lens should not be worn for close indoor work where it costs you detail."},{"q":"Does OSHA require eye protection for my task?","a":"OSHA 29 CFR 1910.133 requires eye and face protection wherever there is a reasonable probability of injury from flying particles, molten metal, liquid chemicals, acids, caustic liquids, chemical gases or vapours, or injurious light. The employer's hazard assessment decides; the standard describes the exposure."},{"q":"How do I stop them slipping or leaving pressure points?","a":"Adjust the temple length and the pantoscopic tilt before blaming the frame, and match the frame size to the face rather than buying one size for a whole crew. Eyewear that hurts comes off, and eyewear that is off is not protection."},{"q":"How should the lens be cleaned without ruining it?","a":"Rinse grit off first, then use a lens-safe cleaner and a soft cloth. Dry-wiping a dusty lens grinds the dust into the coating, and solvents, alcohol wipes and paper towels strip anti-fog and anti-scratch layers."},{"q":"When should eye protection be replaced?","a":"Replace it when the lens is pitted, crazed or deeply scratched, when it has taken a direct impact, or when the frame has lost its grip. Scratches scatter light and weaken the lens, so a scratched Z87+ lens is no longer the thing that was tested."},{"q":"Where do the specifications on this page come from?","a":"From the manufacturer's published listing for this model and from the text of ANSI/ISEA Z87.1 and OSHA 29 CFR 1910.133. WC Safety does not perform impact testing; where a marking is not published, this page says so."},{"q":"How was this page put together?","a":"From the manufacturer's published specification for this model and from the text of the standards it cites. WC Safety is an independent review site and does not perform laboratory testing; where a figure is not published, the page says so instead of estimating one."}]