8 Gallon Gravity-Fed Eyewash Station — Portable, Wall Mount, Dual Spray & Mirror

As an Amazon Associate, WC Safety earns from qualifying purchases. This does not affect the price you pay.

What the 8 Gallon Gravity-Fed Eyewash Station Is

The 8 Gallon Gravity-Fed Eyewash Station is a portable, self-contained emergency eyewash for locations that have no plumbing. Instead of tapping a water line, it holds 8 gallons of flushing fluid in a wall-mounted tank and feeds it by gravity when a worker opens the valve — so you can put primary eyewash coverage in a chemical storage room, janitor closet, mezzanine, loading dock or dilution point where a plumbed station is not feasible. The dual spray heads rinse both eyes at once and the mirror helps an injured person aim when they can barely open their eyes.

Here is the honest arithmetic that decides whether 8 gallons is enough. The ANSI Z358.1 eyewash standard asks for a flow of 0.4 gallons per minute held for a full 15 minutes, which is 6 gallons of flushing fluid — so an 8-gallon tank has the volume to cover a 15-minute eyewash flush with margin to spare. What the number on paper does not settle is the rest of the standard: keeping the fluid tepid, treating and dating it, and siting it within a 10-second reach of the hazard. Get those right and this is real portable compliance infrastructure; skip them and a full tank still fails when it matters.

Portable Compliance: Where a Tank Belongs

The reason a gravity tank exists is that the hazard is often nowhere near a water line. Chemical decanting happens in a back room, dilution at a utility sink, cleaning-chemical storage in a closet — the exact spots where a splash is most likely are the spots a plumber never ran a supply to. A plumbed station gives an unlimited tepid flush and is the right answer wherever you can install one; where you cannot, this self-contained tank puts a full 15-minute eye flush on the wall within a 10-second reach of the hazard. That is its job: coverage in the unplumbed corners, not a replacement for a plumbed station where plumbing is available.

It also sits in a clear tier of eye-flushing gear. Sealed squeeze-bottle stations are supplemental — satellite relief a worker grabs to start rinsing on the way to a real station — but they hold nowhere near 15 minutes and are not primary compliance on their own. This tank is the primary-eyewash tier for an unplumbed area, and bottles can sit alongside it as immediate first-reach relief. If your hazard or flush time is greater, the 14-gallon version carries more reserve; size the tank to the chemical, not the wall space.

Pros & Cons

Specifications

Related Guides

Related Products

Frequently Asked Questions

What is a gravity-fed portable eyewash station for?

It is a self-contained emergency eyewash for places that have no plumbing. Instead of connecting to a water line, it holds its flushing fluid in a tank and feeds it by gravity when a worker opens the valve, so you can put primary eyewash coverage in a chemical storage room, janitor closet, mezzanine, loading dock or dilution point where a plumbed station could never be installed. It wall-mounts near the hazard, and the dual spray heads let the injured person rinse both eyes at once while the mirror helps them aim.

Does 8 gallons meet the 15-minute flush requirement?

On volume, yes — with margin. The ANSI Z358.1 eyewash standard asks for a flow of 0.4 gallons per minute held for a full 15 minutes, which works out to 6 gallons of flushing fluid, and this tank holds 8. So an 8-gallon gravity unit has enough fluid to cover a 15-minute eyewash flush at the eyewash flow rate. That said, meeting the number on paper is not the whole standard, so treat the 8 gallons as the starting point and verify the rest — flow rate, temperature, siting and certification — for your own hazard.

Is it certified to ANSI Z358.1?

Treat certification as something to verify, not assume. This is a generic tank and the listing does not carry a compliance document, so we do not stamp it as certified. What we can say plainly is the arithmetic: 8 gallons covers the 6-gallon volume the eyewash flush needs. Whether the whole installation is compliant depends on the flow rate, keeping the fluid tepid, the additive and change schedule, and putting it within a 10-second reach of the hazard — so confirm the unit and your setup against the standard, or ask the seller for the certification, before you rely on it for a regulated area.

Is this an eyewash or an eye/face wash?

It is an eyewash. That distinction matters under the standard: an eyewash flushes the eyes at 0.4 gallons per minute, while an eye/face wash or a drench covers the whole face at 3.0 gallons per minute — which over 15 minutes is 45 gallons, far more than any 8-gallon tank can hold. So use this unit for eye flushing, and if your hazard assessment calls for full-face or body drenching, that is a different, higher-volume class of equipment. Match the equipment to the exposure your workers actually face.

Does it flush continuously like a plumbed station?

No — a tank holds a fixed volume, so it flushes until it is empty and then stops. That is the trade-off for needing no plumbing: a plumbed station draws from the water supply and can flush indefinitely, while a self-contained tank gives you one full flush cycle of its capacity. It is why capacity matters and why you keep the tank full and dated — the whole point is that the full 15-minute flush is there when someone needs it, so it is not a unit you let run low.

What maintenance does the fluid need?

The fluid is a dated consumable, not fill-and-forget. Plain water in a tank grows bacteria and algae, so the fluid needs a bacteriostatic preservative additive, and the whole charge is changed on the manufacturer's schedule — commonly every few months — with the change date logged on the tank. On top of that you do a weekly check that it is full, sealed, accessible and in date. Build it into your inspection routine the same way you would a fire extinguisher, because an out-of-date or fouled tank is a station that fails when it is needed.

Does the fluid stay tepid?

Not on its own — a gravity tank does not heat or cool. The standard asks for tepid flushing fluid, generally 60 to 100 degrees Fahrenheit, because water that is too cold makes a person pull away before the full flush is done and water that is too hot can worsen a chemical injury. The tank sits at whatever temperature its space is, so mount it in a temperature-controlled area; in a freezing warehouse or a baking rooftop enclosure, the fluid will drift out of the tepid range and you will need to address the room temperature or choose a different solution.

How does it compare to the 14-gallon version?

They do the same job with different capacity. This 8-gallon unit covers the 6-gallon eyewash flush with margin and is more compact on the wall; the larger tank carries more fluid, which gives a longer flush margin and suits a higher-hazard area or one where a longer flush is wanted. Size the tank to the hazard — the more aggressive the chemical and the longer the recommended flush, the more capacity you want in reserve. If you are weighing the two, the reserve volume is the deciding factor, not the hardware, which is otherwise the same idea.

Are squeeze-bottle eyewash stations enough instead?

Bottle stations are supplemental, not a substitute. A pair of sealed squeeze bottles is satellite relief — something a worker grabs to start rinsing on the way to a real station — but they hold only enough for a brief flush, nowhere near 15 minutes, so they do not meet the primary-eyewash duration on their own. A gravity tank like this one is the primary-eyewash tier for an unplumbed area, and bottles can sit alongside it as immediate first-reach relief. Use them together; do not let bottles be your only coverage.

Is the flush all the treatment a splash needs?

No — the 15-minute flush is the first response, not the last. Flushing immediately and thoroughly is what limits an eye injury in the first seconds, but the worker should still get medical attention afterward, and that is especially true after a corrosive or unknown chemical, where damage can continue and a clinician needs to assess the eye. Know your chemicals' safety data sheets, because some exposures call for longer flushing and specific follow-up care beyond what any station provides.

Where should it be mounted?

Within a 10-second walk of the hazard, on the same level, with a clear unobstructed path — an injured worker often cannot see, so they must be able to reach it without stairs, locked doors or clutter in the way. Mount it at the standard height, keep the area around it clear and marked with a sign, and make sure nothing gets stacked in front of it over time. Siting is as much a part of compliance as the tank itself; the best station in the building is useless if someone cannot get to it blind in ten seconds.

What is the 8 Gallon Gravity-Fed Eyewash Station not?

It is not a plumbed station (it holds a fixed 8 gallons and does not flush forever), not an eye/face wash or drench (it flushes eyes at the eyewash rate, not the whole face), not self-heating (mount it where the fluid stays tepid), and not maintenance-free (the fluid is a dated, additive-treated consumable). It is a portable, self-contained primary eyewash that puts a 15-minute eye flush where there is no plumbing — sized, sited, dated and inspected, it is compliance infrastructure for the unplumbed corners of a facility.