MCR BackDraft BD1 Safety Glasses — ANSI Z87.1+ Sport Wrap, Every Variant Coated
$14.99
Final price set by Amazon · may vary
Lens Color: Clear
Lens Coating: MAX3 Anti-Scratch
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the MCR BackDraft BD1, the mid-tier sport-wrap with a guaranteed coated lens on every variant. Editorial assessment by Steven Eaton, WC Safety editor, based on published...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the MCR BackDraft BD1, the mid-tier sport-wrap with a guaranteed coated lens on every variant.
Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this product.
The MCR Safety BackDraft BD1 is a mid-tier wraparound sport safety glass — ANSI/ISEA Z87.1+ high-impact — set apart by a guaranteed coated lens on every variant: your choice of MAX3 anti-scratch hard coat or MAX6 anti-fog, with no uncoated option in the lineup. It comes in Clear and Gray, a step above the economy line for workers who want assured lens performance.
CHECK PRICE ON AMAZON → SHOP MCR SAFETY GLASSES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the MCR BackDraft BD1 guarantees a coated lens
Economy safety glasses often ship with bare polycarbonate — cheap, but it scratches and fogs its way out of service fast. The BD1 removes that gamble: every variant comes factory-coated, so you pick MAX3 anti-scratch or MAX6 anti-fog and never end up with an uncoated lens. That guaranteed coating is the whole point of the mid-tier step up — lenses that stay clear and usable longer. Our full BackDraft BD1 review rates it 4.5/5, and the safety glasses buyer's guide covers when a coated lens is worth the step.
Safety first: a coated lens stays clear longer, which matters because a fogged or scratched lens is the most common reason eye PPE ends up on a forehead. But the BD1 is impact-and-debris protection, not a sealed goggle — it is not rated against a chemical splash hazard, fine airborne dust, or vapor, which require sealed goggles or a face shield per your hazard assessment. Choose eyewear against measured hazards with the when-do-you-need-safety-glasses guide.
What the listing documents
From the published specs: ANSI/ISEA Z87.1+ high-impact rating; a wraparound sport polycarbonate frame; a guaranteed coated lens on every variant — MAX3 anti-scratch or MAX6 anti-fog, no uncoated option; two tints — Clear and Gray; not OTG; base model BD110P. As mcr safety backdraft eyewear, the BD1 is the assured-lens member — genuine factory coated safety glasses, and in its MAX6 form a true max6 anti fog safety glasses option.
Choosing your BD1 variant
Pick tint then coating: Clear from the clear-lens collection for indoor work or Gray for outdoor glare — the clear-vs-smoke lens guide settles that — then MAX3 anti-scratch for abrasive, dusty work or MAX6 anti-fog for humid, temperature-swing conditions. The MAX6 variants pair with the anti-fog guide and anti-fog collection; for humid work at a premium sport tier, the Swagger SR5 is the dedicated anti-fog specialist.
Where the BD1 sits in the MCR line
The BD1 is MCR's mid-tier coated wraparound: a step above the economy all-black BlackKat BL and widest-tint BearKat BK1, and a tier below the premium Swagger SR1 and mono-lens Swagger UD1. Browse the full MCR Safety glasses collection, and the best safety glasses 2026 roundup places the line against other brands.
Where it fits by job and crew orders
The guaranteed coating suits abrasive and fog-prone trades — grinding, cold storage, welding-adjacent, and humid construction — with the construction, manufacturing, and mechanics guides ranking frames by task, and smaller-faced wearers should check the small-face guide. Where the hazard exceeds impact — splash, dust, vapor — step to a sealed goggle from the safety goggles collection or the broader eye protection collection. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Reading the Z87 marking, and what it does not cover
Protective eyewear in the US is built to ANSI/ISEA Z87.1, and OSHA 1910.133 requires eye protection that meets it. The marking on the frame is the specification, and the important distinction is a single character: Z87 is basic impact, Z87+ is high impact — tested with a quarter-inch steel ball at 150 ft/s for spectacles. If the work throws anything, Z87+ is the line.
The suffixes narrow it further: D3 is splash and droplet, D4 dust, D5 fine dust. These matter because a spectacle cannot earn D3 — droplet protection needs a sealed goggle. Safety glasses are impact protection, not chemical splash protection, however wraparound the lens looks, and substituting one for the other is a common and consequential error.
A face shield is also secondary protection under 1910.133: it is worn over primary eye protection, never instead of it. And tint is not shade — a dark lens without a stated IR/UV shade number offers no rated protection against radiant energy.
Frequently asked questions
What is the MCR Safety BackDraft BD1?
A mid-tier wraparound sport safety glass rated ANSI/ISEA Z87.1+ high-impact, distinguished by a guaranteed coated lens on every variant - your choice of MAX3 anti-scratch hard coat or MAX6 anti-fog, with no uncoated option. It comes in Clear and Gray.
What makes the BD1 different from economy glasses?
Every single BD1 variant ships factory-coated - never bare polycarbonate. You choose MAX3 anti-scratch or MAX6 anti-fog, but you never end up with an uncoated lens. That guaranteed coating is why it sits a step above the economy line.
What is the difference between MAX3 and MAX6?
MAX3 is an anti-scratch hard coat for durability in abrasive, dusty work; MAX6 is an anti-fog treatment for humid, high-exertion, or temperature-swing conditions. Pick MAX3 where scratching is the risk, MAX6 where fogging is.
When should I choose the MAX6 anti-fog variant?
When your work creates fog - moving between cold storage and a warm floor, working near welding, or in humid construction. The MAX6 coating keeps the lens clear so the glasses stay on your face instead of pushed up.
Is it ANSI Z87.1+ rated?
Yes - it carries the ANSI/ISEA Z87.1+ high-impact rating (the '+' marks passing the high-velocity and high-mass impact tests), so it meets the requirement for most industrial eye hazards.
What tints does the BD1 come in?
Clear and Gray, each available in MAX3 anti-scratch or MAX6 anti-fog - four variants in all. Clear for indoor work, Gray for outdoor glare; choose the coating by whether scratching or fogging is your bigger problem.
Is the BD1 worth the step up from economy?
If assured lens performance matters - you don't want to gamble on an uncoated lens fogging or scratching out early - yes. The guaranteed MAX3 or MAX6 coating is the value. For the lowest price without that guarantee, the economy BlackKat or BearKat lines are cheaper.
Is it over-the-glasses (OTG)?
No - the BD1 is not an OTG frame. Prescription-glasses wearers should look at MCR's OTG models like the Law OG1 or Klondike OG2, which fit over your own glasses.
Is it enough, or do I need goggles?
The BD1 protects against impact and debris from the front and sides. It does not seal against a chemical splash hazard, fine dust, or vapor - those need sealed goggles or a face shield. Match the eyewear to your hazard assessment.
Does the coating wear off over time?
MAX3 and MAX6 are durable factory treatments, but any coating degrades with harsh cleaners and abrasion. Rinse grit before wiping, use a lens-safe cloth, and retire the lens once scratches or fog-through enter your line of sight.
How do I care for the lenses?
Rinse grit before wiping and use a microfiber or lens-safe cloth; harsh cleaners strip the MAX3 and MAX6 coatings. Retire a lens once scratches enter your line of sight - a scratched safety lens no longer protects fully.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Brand / Vendor
MCR Safety
Model / SKU
BD110P
Product Type
Safety Glasses
Price
$14.99 (Amazon)
Rating
5.0 / 5 — 2 Amazon ratings
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
★★★★★5.0 / 5· 2 ratings on Amazon
★★★★★
Love
Great glasses! They lost such a long time !
Verified Purchaser · April 23, · ✓ Amazon Verified Purchase
★★★★★
Do not clean with anti fog wipes
The only glasses that truly do not fog
Verified Purchaser · April 30, · ✓ Amazon Verified Purchase
Showing 2 of 2 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the MCR Safety BackDraft BD1?
A mid-tier wraparound sport safety glass rated ANSI/ISEA Z87.1+ high-impact, distinguished by a guaranteed coated lens on every variant - your choice of MAX3 anti-scratch hard coat or MAX6 anti-fog, with no uncoated option. It comes in Clear and Gray.
What makes the BD1 different from economy glasses?
Every single BD1 variant ships factory-coated - never bare polycarbonate. You choose MAX3 anti-scratch or MAX6 anti-fog, but you never end up with an uncoated lens. That guaranteed coating is why it sits a step above the economy line.
What is the difference between MAX3 and MAX6?
MAX3 is an anti-scratch hard coat for durability in abrasive, dusty work; MAX6 is an anti-fog treatment for humid, high-exertion, or temperature-swing conditions. Pick MAX3 where scratching is the risk, MAX6 where fogging is.
When should I choose the MAX6 anti-fog variant?
When your work creates fog - moving between cold storage and a warm floor, working near welding, or in humid construction. The MAX6 coating keeps the lens clear so the glasses stay on your face instead of pushed up.
Is it ANSI Z87.1+ rated?
Yes - it carries the ANSI/ISEA Z87.1+ high-impact rating (the '+' marks passing the high-velocity and high-mass impact tests), so it meets the requirement for most industrial eye hazards.
What tints does the BD1 come in?
Clear and Gray, each available in MAX3 anti-scratch or MAX6 anti-fog - four variants in all. Clear for indoor work, Gray for outdoor glare; choose the coating by whether scratching or fogging is your bigger problem.
Is the BD1 worth the step up from economy?
If assured lens performance matters - you don't want to gamble on an uncoated lens fogging or scratching out early - yes. The guaranteed MAX3 or MAX6 coating is the value. For the lowest price without that guarantee, the economy BlackKat or BearKat lines are cheaper.
Is it over-the-glasses (OTG)?
No - the BD1 is not an OTG frame. Prescription-glasses wearers should look at MCR's OTG models like the Law OG1 or Klondike OG2, which fit over your own glasses.
Is it enough, or do I need goggles?
The BD1 protects against impact and debris from the front and sides. It does not seal against a chemical splash hazard, fine dust, or vapor - those need sealed goggles or a face shield. Match the eyewear to your hazard assessment.
Does the coating wear off over time?
MAX3 and MAX6 are durable factory treatments, but any coating degrades with harsh cleaners and abrasion. Rinse grit before wiping, use a lens-safe cloth, and retire the lens once scratches or fog-through enter your line of sight.
How do I care for the lenses?
Rinse grit before wiping and use a microfiber or lens-safe cloth; harsh cleaners strip the MAX3 and MAX6 coatings. Retire a lens once scratches enter your line of sight - a scratched safety lens no longer protects fully.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.