🔍 Click to zoom
Klein Tools 60507 N95 Replacement Filters, 3-Pack
$9.98
Final price set by Amazon · may vary
Disclosures & editorial standardsWC Safety participates in the Amazon Services LLC Associates Program. Outbound Amazon links are affiliate links. We accept no manufacturer payment, sponsorship, or product samples...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
Disclosures & editorial standards
WC Safety participates in the Amazon Services LLC Associates Program. Outbound Amazon links are affiliate links. We accept no manufacturer payment, sponsorship, or product samples. This content is not medical, legal, or regulatory advice. Safety equipment selection is governed by applicable OSHA standards and your facility's safety program.
WC Safety participates in the Amazon Services LLC Associates Program. Outbound Amazon links are affiliate links. We accept no manufacturer payment, sponsorship, or product samples. This content is not medical, legal, or regulatory advice. Safety equipment selection is governed by applicable OSHA standards and your facility's safety program.
Klein Tools 60507 N95 Replacement Filters — 3-Pack
The Klein Tools 60507 is a 3-pack of NIOSH N95 replacement filters designed specifically for the Klein Tools 60506 N95 Reusable Half-Face Mask. Each filter attaches via hook-and-loop for tool-free replacement and includes a foam nose bridge that cushions against the face and helps prevent eyewear from fogging. Rated N95, the filters block at least 95% of non-oil-based airborne particles — protecting against dust, debris, and aerosols generated during sanding, grinding, or processing wood, drywall, minerals, and similar materials. Valve covers hold the filters securely in place in the 60506 facepiece. These filters are not compatible with the Klein Tools 60552/60553 P100 half-mask series (those use the 60554 P100 filter); use 60507 only with the 60506 reusable face mask. Browse all respirator filters and cartridges or the full respiratory protection catalog at WC Safety.
Vendor: Klein Tools | Model: 60507 | ASIN: B0GFBM1789 | Pack Qty: 3 filters
Buy Klein Tools 60507 on Amazon ↗
Certifications & Standards
| NIOSH N95 | National Institute for Occupational Safety and Health approval under 42 CFR Part 84. N95 indicates the filter blocks at least 95% of tested airborne particles using a 0.3-micron sodium chloride challenge aerosol. The "N" designation means not oil-resistant — N95 filters degrade in performance when exposed to oil mist. For oil mist environments, the Klein Tools 60554 P100 filter (for the 60552 series) is required instead. NIOSH N95 is the standard referenced by OSHA's Respiratory Protection Standard (29 CFR 1910.134) for particulate protection. |
| Compatibility | These filters are designed exclusively for the Klein Tools 60506 N95 Reusable Face Mask. The hook-and-loop attachment and valve cover retention system are specific to that facepiece. Do not attempt to use 60507 filters with other respirator facepieces. If you use the Klein Tools 60552 or 60553 P100 Half-Mask Respirator, the correct replacement filter is Klein Tools 60554 P100, sold separately. |
Key Features
| Hook-and-Loop Attachment | Filters attach and detach from the 60506 facepiece without tools. Press the filter flat against the facepiece panel and the hook-and-loop closure holds it in place. Valve covers lock the filter position for a secure seal. Filter replacement takes seconds without disassembling the respirator. |
| Foam Nose Bridge | Soft foam strip along the top edge cushions against the nose and reduces gaps that allow unfiltered air to bypass the filter edges. The foam also reduces the upward path for warm exhaled air, helping prevent fogging of safety glasses worn over the mask. Adjust the foam to the nose profile before donning. |
| 3-Pack Value | Each box contains three individual N95 filter panels. Depending on frequency of use and dust loading, three filters provide multiple days to several weeks of service. Replacing filters before they become clogged maintains breathability and prevents users from loosening the mask to reduce breathing resistance — a common compliance problem in dusty environments. |
| Valve Cover Retention | The 60506 facepiece's valve covers hold each filter panel against the filter ports, maintaining the sealing surface. Inspect valve covers for cracks or deformation at each filter change. Damaged valve covers can allow unfiltered air to enter the mask even with a new filter installed. |
When to Replace the 60507 Filters
- Increased breathing resistance: When the filter becomes clogged with dust, inhaling feels noticeably harder. This is the primary indicator that the filter has reached end of service life for particulate loading.
- After contamination: If the filter surface contacts a liquid (sweat, water, cleaning solution), replace immediately. Wet N95 filters can lose structural integrity and filtration efficiency.
- Visible damage: Tears, holes, creases through the filter media, or deformation of the nose bridge require immediate replacement.
- After extended storage in a contaminated environment: Filters stored in areas with chemical vapors, high humidity, or near chemical containers may be pre-loaded and should be replaced before use.
- OSHA guidance on service life: OSHA 29 CFR 1910.134(d)(3)(iii) requires replacement when a filter is physically damaged or soiled, causes excessive breathing resistance, or fails to pass a seal check. There is no fixed time limit for N95 particulate filters absent the conditions above.
Comparison: N95 vs. P100 Filter Protection
| Filter | Efficiency | Oil Resistance | Best For |
|---|---|---|---|
| Klein Tools 60507 (N95) | 95% | None (oil degrades efficiency) | Dust, drywall, wood, non-oil particulates |
| Klein Tools 60554 (P100) | 99.97% | Oil-proof (P-series) | Metal fumes, oil mist, toxic dust — for 60552/60553 |
| Disposable N95 (e.g., 3M, Moldex) | 95% | None | Short-duration tasks, no decontamination needed |
Frequently Asked Questions
Are the 60507 filters compatible with the Klein Tools 60552 P100 respirator?
No. The 60507 N95 filters are only compatible with the Klein Tools 60506 N95 Reusable Face Mask. The Klein Tools 60552 and 60553 P100 half-mask respirators use Klein Tools 60554 P100 replacement filters, sold separately. Each facepiece model has a proprietary filter interface; do not interchange filters between facepiece models.
Do these filters protect against oil mist?
No. N95 filters are not oil-resistant. Exposure to oil mist can reduce N95 filtration efficiency below the 95% rating. If your work environment includes oil mist, lubricant aerosols, or cutting fluids, use a P-series (P100) filter instead. Browse respirator filters and cartridges for P100 options.
Can I wash and reuse the 60507 filters?
No. Do not wash, dry, or sanitize N95 filter media. The electrostatic charge that provides filtration efficiency is destroyed by water, alcohol, and most cleaning agents. Replace filters when they are soiled, wet, or when breathing resistance increases. The 60506 facepiece itself can be cleaned with mild soap and water, but not the filter media.
How many filters come in a box and how long do they last?
Each package contains 3 N95 filter panels. Service life depends on dust concentration in your environment. In light-dust environments (occasional sanding, clean-up sweeping), each filter may last a week or more. In high-dust conditions (continuous grinding, drywall cutting), replace daily or when breathing resistance increases noticeably. There is no fixed time-based service life for N95 particulate filters under OSHA standards — condition is the determining factor.
Do I still need to be fit-tested if I use the 60506 with 60507 filters?
Yes. If your employer requires you to wear a respirator, fit testing under OSHA 29 CFR 1910.134 is required regardless of filter type. The fit test is performed on the facepiece (60506 mask), not on the filter. Even with a new filter installed, a poor facepiece seal allows unfiltered air to bypass the filter. Fit test results apply to the specific facepiece model tested.
What tasks are the 60507 filters appropriate for?
The 60507 N95 filters are appropriate for: wood dust, drywall dust, concrete dust, mineral dusts, fiberglass particles, non-oil aerosols, and similar particulate hazards generated during sanding, grinding, cutting, and sweeping. They are not appropriate for: chemical vapors or gases, oil mist, radioactive particles (requires P-series), or IDLH atmospheres. Consult a safety data sheet (SDS) for the specific substance to confirm adequate protection.
Where can I buy the Klein Tools 60506 reusable face mask?
The Klein Tools 60506 N95 Reusable Half-Face Mask is the required facepiece for the 60507 filters. Check the half-mask respirators collection at WC Safety or search for Klein Tools 60506 on Amazon (sold separately from this filter 3-pack). If you need a P100-rated half-mask respirator, the Klein Tools 60552 (M/L) or 60553 (S/M) are also available at WC Safety.
Are replacement filters required under OSHA?
OSHA 29 CFR 1910.134(d)(3)(iii) requires that filter elements be replaced whenever they are physically damaged or soiled, breathing resistance becomes excessive, the user notices degraded filter integrity, or the manufacturer recommends replacement. Employers are responsible for providing replacement filters at no cost to employees, ensuring they are available when needed. Reusing a clogged or contaminated filter is an OSHA violation in mandatory-use programs.
Brand / Vendor
Klein Tools
Model / SKU
60507
Product Type
Respirator Filter
Price
$9.98 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.