KASK SuperPlasma HD Safety Helmet β Vented Work & Rescue, Type I Class C (WHE00036)
EDITORIAL REVIEW: 4.7/5 WC Safety Review β the KASK SuperPlasma HD Safety Helmet Editorial assessment by the WC Safety Editorial Team, based on published KASK specifications and the ANSI/ISEA Z89.1-2014 standard. ...
Check Price on Amazonπ Amazon Associate Β· You pay the same price Β· We earn a small commission
Editorial assessment by the WC Safety Editorial Team, based on published KASK specifications and the ANSI/ISEA Z89.1-2014 standard. We did not laboratory-test this product.
SHOP SAFETY HELMETS βSHOP VENTED HARD HATS β
KASK SuperPlasma HD Safety Helmet Overview
The KASK SuperPlasma HD Safety Helmet is a lightweight vented work and rescue helmet weighing about 420 g, with ten air intakes protected by an anti-intrusion grille. It is certified to ANSI/ISEA Z89.1-2014 Type I and Class C, CSA Z94.1-2015, and EN 12492:2012.
As the KASK SuperPlasma HD (KASK WHE00036), it is a vented work and rescue helmet. This lightweight vented safety helmet is a Type I Class C safety helmet built for airflow and a secure fit at height.
Because it is vented, it is Class C and offers no electrical protection β covered below. For electrical work, choose a non-vented Class E helmet such as the KASK Zenith X2. Compare it with the KASK Zenith X-Air and the Petzl Vertex, understand the ratings in hard hat classes explained, and browse the range in safety helmets.
Who This Helmet Is For
| Use case | Fit | Buyer guidance |
|---|---|---|
| Hot, active work at height | Strong | Light 420 g; ten air intakes. |
| Rescue and rope access | Strong | Secure UP & Down fit; EN 12492. |
| Headlamp and visor use | Strong | Lamp clips and visor attachment. |
| Electrical or arc-flash hazards | Not suitable | Vented Class C; use a Class E. |
| ANSI Type II lateral requirement | Not this model | SuperPlasma is ANSI Type I. |
Match the helmet to the hazard. The SuperPlasma HD is Type I, Class C: Type I covers top impact, and Class C means the vented shell is conductive and gives no electrical protection β do not wear it near energized electrical hazards, and choose a non-vented Class E helmet for electrical work. It is ANSI Type I, not Type II, so it is rated for top impact, not lateral impact. Its light weight and ten vents make it comfortable for hot, active work, but a helmet protects your head, not your body: working at height still requires a personal fall arrest system with a harness, connector, and rated anchor. Confirm the Type and Class marked inside the shell against your hazard, and inspect the shell, cradle, and strap before each use. Learn the ratings in Type I vs Type II and hard hats vs safety helmets.
Pros & Cons
- Light 420 g work and rescue helmet
- Ten air intakes with anti-intrusion grille
- UP & Down fit for width, height, and tilt
- Lamp clips and KASK visor attachment
- ANSI Type I, CSA, and EN 12492 certified
- Class C: no electrical protection
- ANSI Type I only; no Type II lateral rating
- Vents rule out an electrical rating
- Premium price vs a basic hard hat
How It Compares
The SuperPlasma HD is a light, highly vented Type I helmet. Weigh it against nearby options:
| Option | Vent | Rating | Best for |
|---|---|---|---|
| KASK SuperPlasma HD (this page) | Vented, 10 intakes | Type I, Class C | Light work and rescue at height |
| KASK Zenith X-Air | Vented | Type I, Class C | Vented industrial helmet |
| KASK Zenith X2 | Non-vented | Type I & II, Class E | Electrical and lateral impact |
Choose the SuperPlasma HD for the lightest, most ventilated work and rescue option, the Zenith X-Air for a vented industrial helmet, or the non-vented Zenith X2 for electrical and Type II work. See best safety helmets, Class E vs Class G, and best hard hat for electrical work.
Specifications
| Brand / Model | KASK SuperPlasma HD (WHE00036) |
| Style | Vented work and rescue safety helmet; ~420 g |
| Ratings | ANSI/ISEA Z89.1-2014 Type I, Class C; CSA Z94.1-2015; EN 12492:2012 |
| Ventilation | 10 air intakes with anti-intrusion grille; outflow channels |
| Fit | UP & Down adjustment; 51-62 cm; ABS shell, HD polystyrene liner |
| Accessories | Nylon lamp clips; KASK visor attachment; anallergic washable chinstrap |
Related Guides
best safety helmets, hard hats vs safety helmets vs bump caps, hard hat classes explained, Type I vs Type II, Class E vs Class G, best hard hat for electrical work.
Related Resources
safety helmets vented hard hats head protection KASK Zenith X-Air KASK Zenith X2
Frequently Asked Questions
What ANSI rating does the KASK SuperPlasma HD have?
It is certified to ANSI/ISEA Z89.1-2014 Type I and Class C, plus CSA Z94.1-2015 and EN 12492:2012. Type I covers top impact, and Class C means the vented shell has no electrical protection. Confirm the marking inside your helmet matches your task.
Can I wear it for electrical work?
No. It is vented and Class C, so it offers no electrical protection. For work near energized parts, choose a non-vented Class E helmet and follow your site's electrical-safety rules. The SuperPlasma is built for airflow, not electrical hazards.
Why is a vented helmet only Class C?
Vents let heat escape but also mean the shell cannot block electrical current, so vented helmets are rated Class C. If you need electrical protection you cannot use a vented helmet; pick a sealed Class E shell instead.
How light is it and how is it ventilated?
It weighs about 420 grams, which is light for a work helmet, and it has ten air intakes with an anti-intrusion grille that keeps debris out while letting air flow. That makes it well suited to hot, active work at height.
Is it a Type I or Type II helmet?
The SuperPlasma HD is ANSI Type I, which covers top impact, and it also meets EN 12492. Its ANSI rating is Type I, not Type II, so if you specifically need ANSI Type II lateral protection, choose a Type II helmet.
What is UP & Down adjustment?
UP & Down is KASK's fit system: a center wheel and two side flaps let you adjust the cradle for width, height, and tilt around the neck. A precise fit keeps the helmet stable during active work and rescue.
Can I attach a headlamp and visor?
Yes. It has strong nylon external lamp clips compatible with headlamps that use elastic bands, and an attachment for KASK visors. Confirm your specific lamp or visor is compatible before relying on it.
Does it have a chin strap?
Yes. It has an anallergic, washable chinstrap, which suits a work and rescue helmet where retention at height matters. Adjust it so the helmet stays level and secure and does not shift during movement.
Is it a work helmet or a rescue helmet?
Both. KASK markets the SuperPlasma HD for work at height and rescue, where light weight, ventilation, and a secure fit matter. Confirm it meets the specific standards your task or team requires.
Does the chinstrap release under load?
Retention behavior depends on the standard the helmet is certified to; EN 12492 helmets are designed to stay on during a fall. Confirm the chinstrap standard for your application, since work and rescue uses can have different retention needs.
Does the harness loop make it fall protection?
No. A helmet is head protection, not fall protection. Working at height still requires separate fall-arrest equipment with a harness, connector, and rated anchor, regardless of how secure the helmet fit is.
How do I clean and store it?
Wash the chinstrap and wipe the shell with mild soap and water, avoid solvents that can weaken it, and store it out of direct sunlight and extreme heat. Inspect the shell, cradle, and strap before each use and retire it after any significant impact.
Written by Steven Eaton, WC Safety Editorial. Specifications sourced from KASK published data and the ANSI/ISEA Z89.1-2014 standard. Compare the range in safety helmets.
WC Safety is an independent PPE retailer; no paid placement. Vented Class C helmets provide no electrical protection; verify the Type and Class marked inside any helmet against your hazard before use.
Customer Reviews
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.